Hello, Could someone point me out, where can I set and what to be able to see the full Calling-Station-Id instead of truncated one? #radwho tt23kswp17 -R User-Name = "tt23kswp17" Acct-Session-Id = "8140098a" NAS-IP-Address = My-NAS-IP NAS-Port = 15731092 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = USER-IP-ADDR Acct-Session-Time = 216 *Calling-Station-Id = "00:A0:C5:3F:13:"* It does obviously miss the last pair of caller's MAC While FreeRadius gets the full mac from the NAS: (2) Received Accounting-Request Id 111 from NAS-IP:42841 to FreeRaius-IP:1813 length 153 (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) NAS-Port = 15731092 (2) NAS-Port-Type = Ethernet (2) User-Name = "tt23kswp17" (2) *Calling-Station-Id = "00:A0:C5:3F:13:2D"* (2) Called-Station-Id = "nas-id" (2) NAS-Port-Id = "Eth7-PPPoE" (2) Acct-Session-Id = "8140098a" (2) Framed-IP-Address = USER-IP-ADDR (2) Acct-Authentic = RADIUS (2) Event-Timestamp = "May 8 2017 14:50:09 EEST" (2) Acct-Status-Type = Start (2) NAS-Identifier = "nas-id (2) Acct-Delay-Time = 0 (2) NAS-IP-Address = NAS-IP-ADDR -- Best regards, Roman.