Hello , I am using Freeradius-1.1.7 with ldap , i am being able to authenticate users when i run radtest , those who are in my ldap directory, but i am unable to authenticate the same authenticate users when i try from the laptop(wifi ) . What should i do .. here the debug mode when i try from radtest---- rad_recv: Access-Request packet from host 127.0.0.1:2050, id=203, length=58 User-Name = "basant" User-Password = "basant" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "basant", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for basant radius_xlat: '(cn=basant)' radius_xlat: 'ou=radius,dc=basant,dc=com' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as cn=admin,dc=basant,dc=com/basant to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=radius,dc=basant,dc=com, with filter (cn=basant) rlm_ldap: checking if remote access for basant is allowed by cn rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user basant authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 0 rlm_ldap: - authenticate rlm_ldap: login attempt by "basant" with password "basant" rlm_ldap: user DN: cn=basant,ou=admins,ou=radius,dc=basant,dc=com rlm_ldap: (re)connect to localhost:389, authentication 1 rlm_ldap: bind as cn=basant,ou=admins,ou=radius,dc=basant,dc=com/basant to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user basant authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 0 modcall: leaving group LDAP (returns ok) for request 0 Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 0 modcall[post-auth]: module "ldap" returns noop for request 0 modcall: leaving group post-auth (returns noop) for request 0 Sending Access-Accept of id 203 to 127.0.0.1 port 2050 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 203 with timestamp 49d36e19 Nothing to do. Sleeping until we see a request. -(Above output is of, when i run the same FR server on virtual machine, result are same as when i do the same radtest on the server which is used below but name of users, password, and LDAP server name are different, ) Here the debug mode output when i try to test from the labtop -- rad_recv: Access-Request packet from host 172.16.1.205:3072, id=0, length=129 User-Name = "easypush" NAS-IP-Address = 172.16.1.205 Called-Station-Id = "001a70aa5bee" Calling-Station-Id = "0021002ca72e" NAS-Identifier = "001a70aa5bee" NAS-Port = 37 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0200000d016561737970757368 Message-Authenticator = 0x19517eaaaf0d384f55a94c110166d9a7 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "easypush", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for easypush radius_xlat: '(uid=easypush)' radius_xlat: 'ou=people,dc=mnit,dc=ac,dc=in' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 172.16.1.150:389, authentication 0 rlm_ldap: bind as uid=easypush,ou=people,dc=mnit,dc=ac,dc=in/basant to 172.16.1.150:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=people,dc=mnit,dc=ac,dc=in, with filter (uid=easypush) rlm_ldap: checking if remote access for easypush is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user easypush authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 0 to 172.16.1.205 port 3072 EAP-Message = 0x010100160410176918b1dfe5a216d1b3635a4fff6d2a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1fe1317a964fed1b43bd8725746926b5 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.1.205:3072, id=0, length=140 User-Name = "easypush" NAS-IP-Address = 172.16.1.205 Called-Station-Id = "001a70aa5bee" Calling-Station-Id = "0021002ca72e" NAS-Identifier = "001a70aa5bee" NAS-Port = 37 Framed-MTU = 1400 State = 0x1fe1317a964fed1b43bd8725746926b5 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100060319 Message-Authenticator = 0x38d2a4a14038ef3786049229a013b6ca Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "easypush", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for easypush radius_xlat: '(uid=easypush)' radius_xlat: 'ou=people,dc=mnit,dc=ac,dc=in' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=people,dc=mnit,dc=ac,dc=in, with filter (uid=easypush) rlm_ldap: checking if remote access for easypush is allowed by uid rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user easypush authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: No such EAP type peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Sending Access-Reject of id 0 to 172.16.1.205 port 3072 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 1 ID 0 with timestamp 49d2d702 Nothing to do. Sleeping until we see a request.