I have spend more than a week, trying every hint i could extract from google. But I am still unable to get a working PEAP setup. Could someone please point out my glaringly obvious mistake.
The main mistake is that authentication - works: Sending Access-Accept of id 9 to 130.225.51.87 port 49707 MS-MPPE-Recv-Key = 0xabfe75a439bfffee14fbe7b08175c562a6ca31ee35da0da4b529c7e245aedbb0 MS-MPPE-Send-Key = 0xb2b712c4df5ba5cdfbc893e6fdc6cbb710d3a52c5d868f8cfcbf7635184cb9aa EAP-Message = 0x03090004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "anonymous" Finished request 9. and eapol: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully EAPOL: IEEE 802.1X for plaintext connection; no EAPOL-Key frames required WPA: EAPOL processing complete EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state SUCCESS EAPOL: SUPP_BE entering state IDLE Reauthentication failed. Read cache section of eap.conf. Ivan Kalik Kalik Informatika ISP