rad_recv: Access-Request packet from host 192.168.0.250:1175, id=66, length=149 User-Name = "kurama" Cisco-AVPair = "ssid=Pukey" NAS-IP-Address = 192.168.0.250 Called-Station-Id = "004096285ceb" Calling-Station-Id = "00095b679ccf" NAS-Identifier = "AP340-285ceb" NAS-Port = 38 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 Service-Type = Login-User EAP-Message = 0x024e000b016b7572616d61 Message-Authenticator = 0xa9ef47a3079c2a10a405828572e5931a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 28 modcall[authorize]: module "preprocess" returns ok for request 28 rlm_ldap: - authorize rlm_ldap: performing user authorization for kurama radius_xlat: '(uid=kurama)' radius_xlat: 'dc=pukey' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in dc=pukey, with filter (uid=kurama) rlm_ldap: looking for check items in directory... rlm_ldap: Adding userPassword as User-Password, value supersecret & op=21 rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusFilterId as Filter-Id, value Enterasys:version=1:policy=Enterprise User & op=11 rlm_ldap: user kurama authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 28 modcall[authorize]: module "chap" returns noop for request 28 modcall[authorize]: module "mschap" returns noop for request 28 rlm_realm: No '@' in User-Name = "kurama", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "kurama" rlm_realm: Proxying request from user kurama to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 28 rlm_eap: EAP packet type response id 78 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 28 modcall[authorize]: module "files" returns notfound for request 28 modcall: leaving group authorize (returns updated) for request 28 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 28 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 28 modcall: leaving group authenticate (returns handled) for request 28 Sending Access-Challenge of id 66 to 192.168.0.250 port 1175 Filter-Id = "Enterasys:version=1:policy=Enterprise User" EAP-Message = 0x014f00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6da2542209613e6e277dfd56deb50f0c Finished request 28 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 28 ID 66 with timestamp 45b79890 Nothing to do. Sleeping until we see a request. This uid does exist and has the NT and LM password attributes.