Hi, I am using freeradius-client-1.1.6 on CentOS 5.4 with windows based freeradius server from freeradius.net. I want to send the Vendor-Specific attribute using radiusclient application. I include the dictionary.cisco file in radiusclient dictionary file as follows: $INCLUDE /usr/local/etc/radiusclient/dictionary.cisco I am giving the following command: radiusclient User-Name=testuser Password=testpw Vendor-Specific=9 h323-remote-address=192.168.2.1 When i am watching the tcpdump capture on radiusclient pc. The above command is accepted by server but the packet is showing as given below: Request Sent by client: Access Request (1), id: 0xba, Authenticator: 402018a985a02bceca216ab2474cd6a1 Username Attribute (1), length: 10, Value: testuser 0x0000: 7465 7374 7573 6572 Password Attribute (2), length: 18, Value: 0x0000: b37e 9117 41f3 6bf3 8d5c 438f 3796 5e1d Vendor Specific Attribute (26), length: 3, Value: [|radius] 0x0000: 39 Framed IPX Network Attribute (23), length: 13, Value: ERROR: length 11 != 4 0x0000: 31 [|radius] My Question is : Why "Framed IPX Network Attribute (23)" is sending by radiusclient if i declared the Vendor-Specific Attributes in dictionary? Response received by client: Access Accept (2), id: 0xba, Authenticator: 6ccb55adfc0d5af921fdab7c111acf18 Please give me the response what the wrong i am doing? I googled about this problem but not able to find anyhelp about radiusclient. Waiting for the response. Thanks, Rahul Panwar