Sorry should have given this email a title... Simon Earthrowl wrote:
Hi, I am trying to configure free radius to work with our 28 NASs. These NASs are split into two groups, at different locations (equal split 14-14). ll NASs report NAS-IP-Address correctly (ie uniquely) Any device requesting authentication randomly connects to any one of the 28 NASs. All devices are unique, and Calling-Station-ID is used to uniquely identify every device. There is no possible chance of multiple instances connecting Some devices *may* require require PAP/CHAP -- the default being ignore User-Name etc. This is configured on a device by device basis. Devices may require an alternative configuration using Called-Station-ID Furthermore, I wish to use MySQL, so that I can add new provisioned devices auto-magically, without needing to tell the radius server. I've a freshly compiled version 2.1.3, running on CentOS 5.3 -- That was by far the easiest bit! Many thanks for that.
*Now the problem....*
Each set of NASs requires a different Framed-IP-Address pool eg 10.0.0.0/24 for site1, and 10.8.0.0/24 for site2 with Called-Station-Id = domain.com, and 192.168.110.0/26 for site1, and 192.168.110.128/26 for site2 with Called-Station-Id = domain.co.uk I'm using sqlippool to supply the IP.
*What I've tried.....*
Pool-name : I've set this in huntgroups, hints, clients.conf with no success whatsoever. Pool-Name: In netgroups -- performace was too slow, as I need 28 groups per device! Virtual-Servers: I just don't get these. The README suggests I don't need a listen clause, the debug output suggests I do. I'm concerned that if I go down this route, I'll end up with slow responses again
*Where I've got to:*
I'm using radcheck table with the Sql-Name set to Calling-Station-ID, with Auth-Type := Accept (for the default case), and adding User-Name & password checking for specific PAP/CHAP authentication.
*What I need please*
Easiest: A fix, so I can set Pool-Name in clients.conf, or hints, that works in sqlippool. Intermediate: Another strategy that will scale (not 28 groups per device) Or Advanced: A far better understanding of where, and how, I can use unlang, and be able to calculate Pool-Name within a context such that sqlippool will corectly allocate an IP address.
Many thanks in anticipation for help/suggestions being offered
kind regards
Simon
------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html