Hi Everyone, I tried to set up Mac Authentication per the the doc at freeradius.org. The client connects but the users don't. The folowing is the output from the debug mode in freeradius. Thanks for your help. eady to process requests. rad_recv: Access-Request packet from host 10.41.0.254 port 32768, id=107, length=135 User-Name = "d8-a2-5e-c4-a4-58" Called-Station-Id = "00-3a-98-8e-ad-d0:USDOD" Calling-Station-Id = "d8-a2-5e-c4-a4-58" NAS-Port = 1 NAS-IP-Address = 10.41.0.254 NAS-Identifier = "NCPSWIFI" Airespace-Wlan-Id = 1 Service-Type = Call-Check Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "d8-a2-5e-c4-a4-58", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[unix] returns notfound [files] users: Matched entry d8-a2-5e-c4-a4-58 at line 1 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] No clear-text password in the request. Not performing PAP. ++[pap] returns noop WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. No User-Password or CHAP-Password attribute in the request. Cannot perform authentication. Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> d8-a2-5e-c4-a4-58 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 107 to 10.41.0.254 port 32768 Waking up in 4.9 seconds. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Mac-authenticaion-failure-tp4428847p... Sent from the FreeRadius - User mailing list archive at Nabble.com.