You are using an old version of the server. Which one? Why don't you use the latest?
dkupis Auth-Type := system Service-Type = NAS-Prompt-User, cisco-avpair == "shell:priv-lvl=15", idle-timeout = 1800
1. How sure are you that you can get to the command prompt over a wireless interface? I don't think that will work. 2. Try something like: dkupis User-Password == "whatever"[, Auth-Type := EAP] try without Auth-Type first. If it doesn't start EAP convesation add it. Ivan Kalik Kalik Informatika ISP With this you should try to put User-Password instead of Auth-Type on the first line. Dana 12/10/2007, "Dorota Kupis" <dkupis@yukoncollege.yk.ca> piše:
I do post users thanks
-----Original Message----- From: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of tnt@kalik.co.yu Sent: Friday, October 12, 2007 12:03 PM To: FreeRadius users mailing list Subject: Re: peap/eap tls authentication
You are setting up Auth-Type System. Post the entry in users file:
users: Matched entry dkupis at line 1
Ivan Kalik Kalik Informatika ISP
Dana 12/10/2007, "Dorota Kupis" <dkupis@yukoncollege.yk.ca> piše:
Hello,
I'm not familiar with freeradius yet. I read some HOWTOs and I do try to make wireless Windows XP talk to Radius server. I have an AP 1131. I have managed to make this configuration work with cisco ACS in the past, so AP part should be OK.
I do send the output from radiusd -X
Hope somebody can help me to point out which parts of configuration should I look into and what possible problems could be.
Thanks for your understanding.
Dorota
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html