I got my Freeradius install ( 1.04 ) authing against a MySQL DB and using dialup_admin to add , delete and administer user accounts. My question , my upstream asks that I return the following replies on authorization ..
ADSL Profiles
You need to return one of two profiles for ADSL users depending on their 'capped' state. For normal (not-capped) users the follwing attributes must be returned in Access-Accepts:
Cisco-AVPair = "ip:ip-unnumbered=Loopback50" Cisco-AVPair = "ip:addr-pool=ipnetpool1" Service-Type = Framed-User Framed-Protocol = PPP
For 'capped' users return the following set:
Cisco-AVPair = "ip:ip-unnumbered=Loopback51" Cisco-AVPair = "ip:addr-pool=ipnetpool2" Service-Type = Framed-User Framed-Protocol = PPP
For 'unshaped dsl' return the following set: Cisco-AVPair = "ip:ip-unnumbered=Loopback52" Cisco-AVPair = "ip:addr-pool=ipnetpool3" Service-Type = Framed-User Framed-Protocol = PPP
I do have an option to use old redback profiles ) but they are not supported any longer and it is preferred that I use the VSA's ... Redback for uncapped dsl .... Ip-Address-Pool-Name = ipnetsubs2 Service-Type = Framed-User Framed-Protocol = PPP Redback for capped dsl ... Ip-Address-Pool-Name = ipnetsubs3 Service-Type = Framed-User Framed-Protocol = PPP The only place I can think of to define this is either in the hints file in the /usr/local/etc/raddb dir OR in the sql database tables , being either radcheck , radgroupreply , radpostauth In including this in the radcheck and radgroupreply tables and when I auth against the radius service , I fail to get the correct attributes back upon authentication BUT the usernames do auth .. Anyone have any ideas ..