I'm trying to set Aruba-Essid-Name using the -N option in the eapol_test command. It says I need to use the numeric ID of the attribute. When I look at the dictionary.aruba file the VENDOR is "14823" and the Aruba-Essid-Name is "5". If I am interpreting this correctly I would do something like: eapol_test -c /etc/eapol_test.conf -a 192.168.10.10 -ss3cr3t -N148235:s:myessid When I run that command I get: 0) Received Access-Request Id 0 from 192.168.0.244:48088 to 192.168.10.10:1812 length 134 (0) User-Name = "testuser" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) Filter-Id = "myessid" "Filter-Id" is showing up rather than "Aruba-Essid-Name" so obviously I am interpreting what I need to do incorrectly. Any help would be appreciated. -- Munroe Sollog (He/Him/His) Senior Network Engineer munroe@lehigh.edu