Hi,
carlos Auth-Type = EAP, User-Password == "carlos" ^^^^^^^^^^^^^^^^ I remove the parte indicated carlos User-Password == "carlos" The problem continue i did thefollowing: In my swich I form three vlan 2,3,4 After I signed ip to the vlans and ports too. This is all the configuration from the switch: =========================== console# show running-config interface ethernet g1 exit vlan database vlan 2-4 exit interface range ethernet g(2-8) switchport access vlan 2 exit interface range ethernet g(9-14) switchport access vlan 3 exit interface range ethernet g(15-20) switchport access vlan 4 exit dot1x system-auth-control interface range ethernet g(2-8,10-14,16-20) dot1x port-control auto exit interface range ethernet g(2-8,10-14,16-20) dot1x re-authentication exit interface vlan 2 ip address 192.168.2.2 255.255.255.0 exit interface vlan 3 ip address 192.168.3.3 255.255.255.0 exit interface vlan 4 ip address 10.20.10.251 255.255.255.0 exit ip default-gateway 10.20.10.1 radius-server host 10.20.10.13 auth-port 1645 timeout 3 radius-server host 10.20.10.251 auth-port 1645 timeout 3 retransmit 3 key mi secreto radius-server host 192.168.2.2 auth-port 1645 timeout 3 retransmit 3 key mis ecreto radius-server host 192.168.3.3 auth-port 1645 timeout 3 retransmit 3 key mis ecreto radius-server key misecreto aaa authentication dot1x default radius username admin password 7d8c9c8b116cdfe3fb091f4c1ac684de level 15 encrypted
Vlan Name Ports Type Authorization ---- ----------------- --------------------------- ------------ ------------- 1 1 g(1,21-24),ch(1-8) other Required 2 2 g(1-8) permanent Required 3 3 g(1,9-14) permanent Required 4 4 g(15-20) permanent Required console# show ip interface Gateway IP Address Activity status Type ----------------------- ----------------------- -------- 10.20.10.1 Active static IP Address I/F Type ----------------------- ---------------------- --------- 10.20.10.251/24 vlan 4 Static 192.168.2.2/24 vlan 2 Static 192.168.3.3/24 vlan 3 Static =============================================== How you see this is the configuration from my switch. In the file users I have the following configuration. +++++++++++++++++++++++++++++++++++++++++++++ carlos User-Password == "carlos" Service-Type = Framed-User, Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2 saul User-Password == "saul" Service-Type = Framed-User, Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-ID = 4 +++++++++++++++++++++++++++++++++++++++++++++ Now the problem is that: The PC client (WindowsXP) is connected to the port 17 for that it is included in the vlan 4. When I intro the user: carlos and his password: carlos it shouldn't autenticate becauses it user is asigned to the vlan 2. But the problem is that the user is autenticate and has access to the vlan4. My conclution is that: Tunnel-Type = VLAN, Tunnel-Medium-Type = IEEE-802, Tunnel-Private-Group-Id = 2 don work. I probably need to configure something. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.