Hi, we're using freeradius to switch different computer into various vlans on our switches. We have had a working configuration for freeradius 1.x, but for 2.1.6 (running on SLES) this configuration is working different. We're including a file looking like this: ------------------- # VLAN 14 # # DEFAULT Tunnel-Private-Group-ID = 14, Foundry-802_1x-enable = 0, Fall-Through = 1 # aaabbbcccddd User-Password == "aaabbbcccddd" # VLAN 15 # # DEFAULT Tunnel-Private-Group-ID = 15, Foundry-802_1x-enable = 0, Fall-Through = 1 # bbbcccdddaaa User-Password == "bbbcccdddaaa" --------------------------- On the new freeradius *all* valid mac addresses are getting the vlan Tunnel-Private-Group-ID from the first statement. All other vlan id's are ignored. The advantage was, to group all mac according to the vlan-id. Now you have to add all settings to each mac .... Is there a way to group the mac addresses with one header ? -- Bye, Peer _________________________________________________________ Max-Planck-Institut fuer Biogeochemie Dr. Peer-Joachim Koch Hans-Knöll Str.10 Telefon: ++49 3641 57-6705 D-07745 Jena Telefax: ++49 3641 57-7705