tnt@kalik.net wrote:
It is "other" both in the localhost client and in the client I created to test using radiustest.
I have, it shows 5 sessions for this user.
mysql> SELECT COUNT(*) FROM radacct WHERE UserName='yellowhousejake' AND AcctStopTime = 0; +----------+ | COUNT(*) | +----------+ | 5 | +----------+ 1 row in set (0.00 sec)
- send Access-Request Changed Packet-Type to Access-Request, auth is approved.
--------------------10/27/2008 2:26:27 PM Test started [check_simul]------------------------- Info:Sending Access-Request of id 0 to 10.0.241.95:1645 User-Name = "yellowhousejake" User-Password = "marlin" Info: Access-Accept packet from host 10.0.241.95:1645, id=0, length=89 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 255.255.255.254 Framed-IP-Netmask = 255.255.255.255 Framed-Routing = None Framed-Compression = Van-Jacobson-TCP-IP Filter-Id = "std.ppp" Framed-MTU = 1500 Port-Limit = 1 Idle-Timeout = 600 Session-Timeout = 28800
Total approved auths: 1 Total denied auths: 0 Total lost auths: 0 Total time(secs): 0
Since I am testing with a test client from my laptop, and using radtest on the radius server (localhost), and using only accounting data to check for simultaneous use, does checkrad even come into play?
Not when nastype is set to "other". Post the debug (radiusd -X). And user/group entry (where is Simultaneous-Use set).
Here is the last debug I ran plus the query results for that user's config. http://pixelhammer.com/Dan/debug.txt DAve
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- I am watching the debate and I am very disappointed. The rules are simple, "answer the question". I would vote right now, and I can in Indiana, for the man who answered the question directly, in less than a minute, and then sat down before the green light was out.