I personnally use post-auth sections of each of my virtual server to send diffrenet attributes. I find It to be very clean way to achieve this. regards Le 08/10/2011 20:02, Wegener, Norbert a écrit :
The general idea is to setup a virtual server for each type of NAS and make sure, that every NAS is loaded into the correct virtual server.
With best regards,
------------------------------------------------------------------------ Norbert Wegener Siemens IT Solutions and Services AIS MS NC PSU SDC Bruchstraße 5 45883 Gelsenkirchen, Germany Tel.: +49 (209) 94565716 Fax: +49 (201) 8165581284 mailto:norbert.wegener@atos.net
Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz, Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des Aufsichtsrats: Charles Dehelly; Sitz der Gesellschaft: München, Deutschland; Registergericht: München, HRB 184933. ------------------------------------------------------------------------ *Von:* freeradius-users-bounces+norbert.wegener=atos.net@lists.freeradius.org [freeradius-users-bounces+norbert.wegener=atos.net@lists.freeradius.org]" im Auftrag von "Suman Dash [sumandash@gmail.com] *Gesendet:* Samstag, 8. Oktober 2011 16:39 *Bis:* FreeRadius users mailing list *Betreff:* Dynamic Attributes Based on NAS Type !
Hi Everyone ... Currently i am planning to integrate freeradius with different NAS like Chillispot , Cisco etc and enable roaming users so that they can log in from any of the NAS.
As the reply items are different with different NAS , i am looking for ideas how to enable a single user to roam and connect from different NAS.
In my case i think static reply items are not possible per user wise or per groupwise so my question is what trick can be used to achieve the same.
I had not tried anything as i have no clue on the same so some highlights on the approach will be a good starting point for me.
Cheers Suman
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- <http://www.horoa.net> Alexandre Chapellon Ingénierie des systèmes open sources et réseaux. Follow me on twitter: @alxgomz <http://www.twitter.com/alxgomz>