Hello, I am try to set up authentication for Oracle 10g (on Solaris) --> Radius (on Solaris)--> LDAP (on Z/os) --> Racf (on z/os)... i was able to get past my last error however now I am getting a "no authentication method found" type of error. Can anyone assist me? I have checked that the secret password matches on the LDAP server, radius server and Oracle... rad_recv: Access-Request packet from host 10.71.175.19:37544, id=178, length=47 User-Name = "NBCTST1" User-Password = "/\265P\251R\344>%P\2022\0144\0165p" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 radius_xlat: '/opt/local/var/log/radius/radacct/10.71.175.19/auth-detail-20070511' rlm_detail: /opt/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /opt/local/var/log/radius/radacct/10.71.175.19/auth-detail-20070511 modcall[authorize]: module "auth_log" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "NBCTST1", skipping NULL due to config. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 1 modcall[authorize]: module "files" returns notfound for request 1 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 1 modcall: leaving group authorize (returns ok) for request 1 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [NBCTST1//\265P\251R\344>%P\2022\0144\0165p] (from client test1 port 0) WARNING: Unprintable characters in the password. ? Double-check the shared secret on the server and the NAS! Delaying request 1 for 1 seconds