Ok, I seem to have found some information on the net .. Is it as simple as changing the '=' to '+=' when creating the ldap entry ? i.e. from: cisco-avpair="tunnel-private-group-ID(#81)=noc to: cisco-avpair+="tunnel-private-group-ID(#81)=noc Currently, I use a GENERIC attribute for replyItem, so even though the documentation seems to indicate an operator might be defined in lap.attrmap for the particular replyitem, I don't think I want to do this ? Thanks, Robert ________________________________________ From: freeradius-users-bounces+robert.roll=utah.edu@lists.freeradius.org [freeradius-users-bounces+robert.roll=utah.edu@lists.freeradius.org] On Behalf Of Robert Roll [Robert.Roll@utah.edu] Sent: Wednesday, June 22, 2011 7:38 AM To: freeradius-users@lists.freeradius.org Subject: Returning Multiple Reply Items problem ? I seen to have encountered a problem with returning multiple reply-item attributes ? They seem to be found, but only some arereturned... see the debug snippets below... It seems if they have the same name, only one of them gets returned ? However, for the Cisco-AVPair attributes, it is very common to need to define many of them ? Is there a way to get them all returned ? Currently running 2.1.10 .. Thanks, Robert i.e. ##### Seem to be found in Directory ##############3 [ldapADutVLANs] looking for reply items in directory... [ldapADutVLANs] extracted attribute Airespace-Interface-Name from generic item Airespace-Interface-Name=wifi-hist-uconnect [ldapADutVLANs] extracted attribute Airespace-Interface-Name from generic item Airespace-Interface-Name=wifi-noc-uconnect [ldapADutVLANs] extracted attribute Cisco-AVPair from generic item cisco-avpair="tunnel-private-group-ID(#81)=noc" [ldapADutVLANs] extracted attribute Cisco-AVPair from generic item cisco-avpair="tunnel-medium-type(#65)=802 media(6)" [ldapADutVLANs] extracted attribute Cisco-AVPair from generic item cisco-avpair="tunnel-type(#64)=VLAN(13)" ## However when they need to be returned, only one of each gets returned ? ###### [peap] Using saved attributes from the original Access-Accept Airespace-Interface-Name = "wifi-hist-uconnect" Cisco-AVPair = "tunnel-private-group-ID(#81)=noc" Sending Access-Accept of id 11 to 155.97.142.192 port 53533 Airespace-Interface-Name = "wifi-hist-uconnect" Cisco-AVPair = "tunnel-private-group-ID(#81)=noc" - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html