Hello, it's me again, did you miss me? :) Thing is, i tried to make 2nd freeradius server (eap-peap,mschapv2,openldap), with same setup and i configured it exact same way, but i get this when i try to connect: rad_recv: Access-Request packet from host 192.168.1.1:3079, id=0, length=121 User-Name = "test" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "004010100003" Calling-Station-Id = "000e3557c74e" NAS-Identifier = "004010100003" NAS-Port = 30 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000090174657374 Message-Authenticator = 0x39a9a7986f599b0dc47291d0bbcce631 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for test radius_xlat: '(uid=test)' radius_xlat: 'ou=People,dc=kapion,dc=si' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to localhost:389, authentication 0 rlm_ldap: bind as / to localhost:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,dc=kapion,dc=si, with filter (uid=test) rlm_ldap: Added password tset1 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 0 to 192.168.1.1:3079 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9ef689c7fbaeabf2695de1a430324a73 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.1.1:3079, id=0, length=121 User-Name = "test" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "004010100003" Calling-Station-Id = "000e3557c74e" NAS-Identifier = "004010100003" NAS-Port = 30 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000090174657374 Message-Authenticator = 0x2ec95d116f20e8634b835c646acc514c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 0 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for test radius_xlat: '(uid=test)' radius_xlat: 'ou=People,dc=kapion,dc=si' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=People,dc=kapion,dc=si, with filter (uid=test) rlm_ldap: Added password tset1 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 0 to 192.168.1.1:3079 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x7272c2a0a6297ac9ea330896b6ff418f Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.1.1:3079, id=0, length=121 User-Name = "test" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "004010100003" Calling-Station-Id = "000e3557c74e" NAS-Identifier = "004010100003" NAS-Port = 30 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020100090174657374 Message-Authenticator = 0xfa9d4d904e4f8b7c563584026add7ad6 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 1 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for test radius_xlat: '(uid=test)' radius_xlat: 'ou=People,dc=kapion,dc=si' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=People,dc=kapion,dc=si, with filter (uid=test) rlm_ldap: Added password tset1 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 0 to 192.168.1.1:3079 EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x40e3042c6743b4d8e9fa35eac7cee031 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.1.1:3079, id=0, length=121 User-Name = "test" NAS-IP-Address = 192.168.1.1 Called-Station-Id = "004010100003" Calling-Station-Id = "000e3557c74e" NAS-Identifier = "004010100003" NAS-Port = 30 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000090174657374 Message-Authenticator = 0x38cc006f8656690e7883ebcf7ccf2898 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 0 length 9 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for test radius_xlat: '(uid=test)' radius_xlat: 'ou=People,dc=kapion,dc=si' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=People,dc=kapion,dc=si, with filter (uid=test) rlm_ldap: Added password tset1 in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user test authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 0 to 192.168.1.1:3079 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x911b01ec3a06bad2ce7802185fb893c8 Finished request 3 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 0 with timestamp 4513dd96 Nothing to do. Sleeping until we see a request. And i really can't find, what seems to be the problem :(