Hi,
Issuing 'radius -X' still isn't showing anything :-(
radiusd -X ? please ensure you are trying to runt he right command.... if you dont see anything on the output when client connection attempts are made, then you have a problem elsewhere on the network or on the NAS.... you could try running tcpdump -eqntl -i ethX port 1812 (replace ethX with the name of your interface on which packets should be arriving) you can also turn on debuggin on your NAS - cisco kit has quite extensive 802.1X debugging - you should then see it sending traffic.... I suspect you may have an ACL between the management level of the switches and your server.
Radius can't be this hard to get working can it?
the bit you are doing should be easy. the hard part is authentication and policy. alan