Does Mikrotik support CoA? If it does, this can be done (Disconnect-Request blah,blah). Ivan Kalik Kalik Informatika ISP -----Original Message----- From: freeradius-users-bounces+tnt=kalik.net@lists.freeradius.org [mailto:freeradius-users-bounces+tnt=kalik.net@lists.freeradius.org] On Behalf Of Adi_T Sent: 16 April 2009 13:39 To: freeradius-users@lists.freeradius.org Subject: Mikrotik radius-mac-authentication I'm using Freeradius to control the access to my Mikrotik APs. In the radius database I've put at the radcheck table all the mac-addresses of my clients. When I put accept as a value, the clients connects immediately, but when I put reject the clients that are connected do not disconnect. I have to disable radius-mac-authentication at the security profile of the wireless interface and enable it again so that the connected clients that are declared as rejected disconnect from the APs and do not reconnect again. Is there anything I can do to automatically block even the connected clients when I put reject as a value Thanks in advance Adi -- View this message in context: http://www.nabble.com/Mikrotik-radius-mac-authentication-tp23077135p23077135 .html Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.238 / Virus Database: 270.11.57/2060 - Release Date: 04/15/09 19:52:00