hi, this debug log below, is it means that is working ? *Proxying request 1 to home server 103.247.122.210 port 1813* *Sending Accounting-Request of id 105 to 103.247.122.210 port 1813* * Service-Type = Framed-User* * Framed-Protocol = PPP* * NAS-Port = 417051* * NAS-Port-Type = Ethernet* * User-Name = "ultimate_dhanz"* * Calling-Station-Id = "D4:CA:6D:9E:46:AF"* * Called-Station-Id = "PPPoE.Service.Vlan25"* * NAS-Port-Id = "vlan25"* * MS-CHAP-Domain = "yahoo.com <http://yahoo.com>"* * Acct-Session-Id = "81b0003f"* * Framed-IP-Address = 103.247.123.4* * Acct-Authentic = RADIUS* * Event-Timestamp = "Jan 24 2014 21:19:54 WIT"* * Acct-Session-Time = 248700* * Acct-Input-Octets = 237148671* * Acct-Input-Gigawords = 0* * Acct-Input-Packets = 1639185* * Acct-Output-Octets = 1538150698* * Acct-Output-Gigawords = 0* * Acct-Output-Packets = 1880782* * Acct-Status-Type = Interim-Update* * NAS-Identifier = "DR2.SMG"* * Acct-Delay-Time = 0* * Mikrotik-Realm = "yahoo.com <http://yahoo.com>"* * NAS-IP-Address = 103.247.123.158* * Proxy-State = 0x3438* *Going to the next request* *Waking up in 0.3 seconds.* *rad_recv: Accounting-Response packet from host 103.247.122.210 port 1813, id=105, length=24* * Proxy-State = 0x3438* *+- entering group post-proxy {...}* *[eap] No pre-existing handler found* *++[eap] returns noop* *Sending Accounting-Response of id 48 to 103.247.123.158 port 60060* *Finished request 1.* *Cleaning up request 1 ID 48 with timestamp +52* *Going to the next request* thanks. On Fri, Jan 24, 2014 at 8:58 PM, Alan DeKok <aland@deployingradius.com>wrote:
battossai wrote:
So i don't edit proxy.conf right ?
For proxying, you usually edit proxy.conf.
Can you a short meaning of a realm ?
Read proxy.conf. This is documented.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html