radius version is 1.1.7 root@colo-radius:/usr/sbin# freeradius -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/www" main: libdir = "/usr/lib" main: radacctdir = "/var/www/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1645 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/www/radius.txt" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded Counter counter: filename = "/etc/freeradius/db.daily" counter: key = "User-Name" counter: reset = "daily" counter: count-attribute = "Acct-Session-Time" counter: counter-name = "Daily-Session-Time" counter: check-name = "Max-Daily-Session" counter: allowed-servicetype = "Framed-User" counter: cache-size = 5000 rlm_counter: Counter attribute Daily-Session-Time is number 1830 rlm_counter: Current Time: 1230746513 [2008-12-31 13:01:53], Next reset 1230786000 [2009-01-01 00:00:00] Module: Instantiated counter (daily) Module: Loaded LDAP ldap: server = "172.16.8.141" ldap: port = 389 ldap: net_timeout = 10 ldap: timeout = 5 ldap: timelimit = 5 ldap: identity = "" ldap: tls_mode = no ldap: start_tls = no ldap: tls_cacertfile = "(null)" ldap: tls_cacertdir = "(null)" ldap: tls_certfile = "(null)" ldap: tls_keyfile = "(null)" ldap: tls_randfile = "(null)" ldap: tls_require_cert = "allow" ldap: password = "" ldap: basedn = "o=nwf,c=us" ldap: filter = "(&(CN=%{User-Name})(objectClass=person))" ldap: base_filter = "(objectclass=radiusprofile)" ldap: default_profile = "(null)" ldap: profile_attribute = "(null)" ldap: password_header = "(null)" ldap: password_attribute = "(null)" ldap: access_attr = "(null)" ldap: groupname_attribute = "cn" ldap: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" ldap: groupmembership_attribute = "(null)" ldap: dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap: ldap_debug = 0 ldap: ldap_connections_number = 10 ldap: compare_check_items = no ldap: access_attr_used_for_allow = yes ldap: do_xlat = yes ldap: edir_account_policy_check = yes ldap: set_auth_type = yes rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0xb93ecd88 Module: Instantiated ldap (ldap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Listening on authentication *:1645 Listening on accounting *:1646 Ready to process requests. rad_recv: Access-Request packet from host 172.16.8.7:1543, id=105, length=58 User-Name = "hottel" User-Password = "" NAS-IP-Address = 64.241.16.2 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for hottel radius_xlat: '(&(CN=hottel)(objectClass=person))' radius_xlat: 'o=nwf,c=us' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 172.16.8.141:389, authentication 0 rlm_ldap: bind as / to 172.16.8.141:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in o=nwf,c=us, with filter (&(CN=hottel)(objectClass=person)) rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Setting Auth-Type = ldap rlm_ldap: user hottel authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type ldap auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 0 rlm_ldap: - authenticate rlm_ldap: login attempt by "hottel" with password "" rlm_ldap: user DN: cn=Hottel,ou=Users,ou=HQ,o=NWF,c=US rlm_ldap: (re)connect to 172.16.8.141:389, authentication 1 rlm_ldap: bind as cn=Hottel,ou=Users,ou=HQ,o=NWF,c=US/ to 172.16.8.141:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user hottel authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 0 modcall: leaving group LDAP (returns ok) for request 0 Login OK: [hottel] (from client Sonicwall port 0) Sending Access-Accept of id 105 to 172.16.8.7 port 1543 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 105 with timestamp 495bb3a1 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.16.8.7:1543, id=106, length=57 User-Name = "icore" User-Password = "" NAS-IP-Address = 64.241.16.2 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 rlm_ldap: - authorize rlm_ldap: performing user authorization for icore radius_xlat: '(&(CN=icore)(objectClass=person))' radius_xlat: 'o=nwf,c=us' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in o=nwf,c=us, with filter (&(CN=icore)(objectClass=person)) rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Setting Auth-Type = ldap rlm_ldap: user icore authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 1 modcall: leaving group authorize (returns ok) for request 1 rad_check_password: Found Auth-Type ldap auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 1 rlm_ldap: - authenticate rlm_ldap: login attempt by "icore" with password "" rlm_ldap: user DN: cn=icore,ou=External,ou=HQ,o=NWF,c=US rlm_ldap: (re)connect to 172.16.8.141:389, authentication 1 rlm_ldap: bind as cn=icore,ou=External,ou=HQ,o=NWF,c=US/ to 172.16.8.141:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user icore authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 1 modcall: leaving group LDAP (returns ok) for request 1 Login OK: [icore] (from client Sonicwall port 0) Sending Access-Accept of id 106 to 172.16.8.7 port 1543 Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 172.16.8.7:1543, id=107, length=57 User-Name = "icore" User-Password = "" NAS-IP-Address = 64.241.16.2 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 rlm_ldap: - authorize rlm_ldap: performing user authorization for icore radius_xlat: '(&(CN=icore)(objectClass=person))' radius_xlat: 'o=nwf,c=us' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in o=nwf,c=us, with filter (&(CN=icore)(objectClass=person)) rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Setting Auth-Type = ldap rlm_ldap: user icore authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 2 modcall: leaving group authorize (returns ok) for request 2 rad_check_password: Found Auth-Type ldap auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 2 rlm_ldap: - authenticate rlm_ldap: login attempt by "icore" with password "" rlm_ldap: user DN: cn=icore,ou=External,ou=HQ,o=NWF,c=US rlm_ldap: (re)connect to 172.16.8.141:389, authentication 1 rlm_ldap: bind as cn=icore,ou=External,ou=HQ,o=NWF,c=US/ to 172.16.8.141:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user icore authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 2 modcall: leaving group LDAP (returns ok) for request 2 Login OK: [icore] (from client Sonicwall port 0) Sending Access-Accept of id 107 to 172.16.8.7 port 1543 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 1 ID 106 with timestamp 495bb3ae Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 107 with timestamp 495bb3b0 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.16.8.7:1543, id=108, length=57 User-Name = "icore" User-Password = "" NAS-IP-Address = 64.241.16.2 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 rlm_ldap: - authorize rlm_ldap: performing user authorization for icore radius_xlat: '(&(CN=icore)(objectClass=person))' radius_xlat: 'o=nwf,c=us' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in o=nwf,c=us, with filter (&(CN=icore)(objectClass=person)) rlm_ldap: No default NMAS login sequence rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Setting Auth-Type = ldap rlm_ldap: user icore authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 3 modcall: leaving group authorize (returns ok) for request 3 rad_check_password: Found Auth-Type ldap auth: type "LDAP" Processing the authenticate section of radiusd.conf modcall: entering group LDAP for request 3 rlm_ldap: - authenticate rlm_ldap: login attempt by "icore" with password "" rlm_ldap: user DN: cn=icore,ou=External,ou=HQ,o=NWF,c=US rlm_ldap: (re)connect to 172.16.8.141:389, authentication 1 rlm_ldap: bind as cn=icore,ou=External,ou=HQ,o=NWF,c=US/ to 172.16.8.141:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: user icore authenticated succesfully modcall[authenticate]: module "ldap" returns ok for request 3 modcall: leaving group LDAP (returns ok) for request 3 Login OK: [icore] (from client Sonicwall port 0) Sending Access-Accept of id 108 to 172.16.8.7 port 1543 Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 108 with timestamp 495bb3ba Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 172.16.8.7:1543, id=109, length=57 User-Name = "icore" User-Password = "" NAS-IP-Address = 64.241.16.2 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 rlm_ldap: - authorize rlm_ldap: performing user authorization for icore radius_xlat: '(&(CN=icore)(objectClass=person))' radius_xlat: 'o=nwf,c=us' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in o=nwf,c=us, with filter (&(CN=icore)(objectClass=person)) rlm_ldap: object not found or got ambiguous search result rlm_ldap: search failed rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns notfound for request 4 modcall: leaving group authorize (returns ok) for request 4 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect (rlm_ldap: User not found): [icore/] (from client Sonicwall port 0) Delaying request 4 for 1 seconds Finished request 4 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 109 to 172.16.8.7 port 1543 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 4 ID 109 with timestamp 495bb3cf Nothing to do. Sleeping until we see a request.
On 12/31/2008 at 10:46 AM, in message <495B93D8.3020305@deployingradius.com>, Alan DeKok <aland@deployingradius.com> wrote: John Hottel wrote: If i happen to make a login attempt within 15 seconds of that coming up, i see:
"---Walking the entire request list---
You are running 1.1.7 (or later). Upgrade to 2.1.3.
Waking up in 1 seconds... sending Access-Reject waking up in 4 seconds... "
When i try again, it works.
Any ideas what this could be? If you need more info as to my version of freeradius, i will be more then happy to supply the info, if you tell me how to retrieve it :)
$ man radiusd radiusd -v Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html