Hello, I attached two log files obtained from freeradius. For both were used the same configuration files in server;in fact the server wasn't stopped at all. But, if client choose to do chap, in Acces-Accept received from server I will get all the attributes I set up in users file(see chap.logcopyed attached) and if client choose to do mschapv2, in Acces-Accept received from server I won't get any of the attributes I set up in users file(see chapv2.log attached) WHY??? Thank you! [root@AAA1 RADIUS-102.INSTALLED]# sbin/radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /udir/RADIUS-102.INSTALLED//etc/raddb/proxy.conf Config: including file: /udir/RADIUS-102.INSTALLED//etc/raddb/clients.conf Config: including file: /udir/RADIUS-102.INSTALLED//etc/raddb/snmp.conf Config: including file: /udir/RADIUS-102.INSTALLED//etc/raddb/eap.conf Config: including file: /udir/RADIUS-102.INSTALLED//etc/raddb/sql.conf main: prefix = "/udir/RADIUS-102.INSTALLED/" main: localstatedir = "/udir/RADIUS-102.INSTALLED//var" main: logdir = "/udir/RADIUS-102.INSTALLED//var/log/radius" main: libdir = "/udir/RADIUS-102.INSTALLED//lib" main: radacctdir = "/udir/RADIUS-102.INSTALLED//var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/udir/RADIUS-102.INSTALLED//var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/udir/RADIUS-102.INSTALLED//var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/udir/RADIUS-102.INSTALLED//sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /udir/RADIUS-102.INSTALLED/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/udir/RADIUS-102.INSTALLED//var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "ttls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/udir/RADIUS-102.INSTALLED//etc/raddb/certs/NEW/server-key.pem" tls: certificate_file = "/udir/RADIUS-102.INSTALLED//etc/raddb/certs/NEW/server.pem" tls: CA_file = "/udir/RADIUS-102.INSTALLED//etc/raddb/certs/NEW/ca-cert.pem" tls: private_key_password = "asb#1234" tls: dh_file = "/udir/RADIUS-102.INSTALLED//etc/raddb/certs/NEW/dh" tls: random_file = "/udir/RADIUS-102.INSTALLED//etc/raddb/certs/NEW/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = yes tls: check_cert_cn = "(null)" tls: session_resume = 1 rlm_eap: Loaded and initialized type tls ttls: default_eap_type = "mschapv2" ttls: copy_request_to_tunnel = yes ttls: use_tunneled_reply = yes rlm_eap: Loaded and initialized type ttls sim: fast_reauth = no sim: success_notification = no rlm_eap_sim: fast_reauth = 0 rlm_eap_sim: success_notification = 0 rlm_eap: Loaded and initialized type sim mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/udir/RADIUS-102.INSTALLED//etc/raddb/huntgroups" preprocess: hints = "/udir/RADIUS-102.INSTALLED//etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/udir/RADIUS-102.INSTALLED//etc/raddb/users" files: acctusersfile = "/udir/RADIUS-102.INSTALLED//etc/raddb/acct_users" files: preproxy_usersfile = "/udir/RADIUS-102.INSTALLED//etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/udir/RADIUS-102.INSTALLED//var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/udir/RADIUS-102.INSTALLED//var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests. rad_recv: Access-Request packet from host 10.10.10.30:36608, id=1, length=166 Calling-Station-Id = "00-17-C4-27-4E-F6" Message-Authenticator = 0x7d3c069900bb8893673f740ea1590d83 EAP-Message = 0x02b4001601616e6f6e796d6f7573406173622e636f6d Framed-MTU = 3795 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 WiMAX-Attr-46 = 0x00111111323200 Service-Type = Framed-User WiMAX-Attr-1 = 0x000105312e3202030203030a WiMAX-Attr-36 = 0x0000000001 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 180 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation rlm_eap: try to find eap sim reauthentication_id anonymous modcall[authorize]: module "eap" returns updated for request 0 modcall[authorize]: module "files" returns notfound for request 0 modcall: group authorize returns updated for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: try to find eap sim reauthentication_id anonymous@asb.com rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: group authenticate returns handled for request 0 Sending Access-Challenge of id 1 to 10.10.10.30:36608 EAP-Message = 0x01b500061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba61ca9b52cb6ff25601201d4ca728fd Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.10.10.30:36608, id=2, length=270 Calling-Station-Id = "00-17-C4-27-4E-F6" Message-Authenticator = 0x77cc0b660630b76c95898f04a1bbd572 EAP-Message = 0x02b5006c150016030100610100005d030148186938abaff4e966a0d8ebeb3db10cd8600c6ee7e67fc1f69021a3e53778f200003600390038003500160013000a00330032002f0007006600050004006300620061001500120009006500640060001400110008000600030100 Framed-MTU = 3795 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 State = 0xba61ca9b52cb6ff25601201d4ca728fd WiMAX-Attr-46 = 0x00111111323200 Service-Type = Framed-User WiMAX-Attr-1 = 0x000105312e3202030203030a WiMAX-Attr-36 = 0x0000000001 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 181 length 108 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation rlm_eap: try to find eap sim reauthentication_id anonymous modcall[authorize]: module "eap" returns updated for request 1 modcall[authorize]: module "files" returns notfound for request 1 modcall: group authorize returns updated for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0061], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0438], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 010d], ServerKeyExchange TLS_accept: SSLv3 write key exchange A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode hit in SSL is 0 eaptls_process returned 13 handler->eap_ds->request->code 1 modcall[authenticate]: module "eap" returns handled for request 1 modcall: group authenticate returns handled for request 1 Sending Access-Challenge of id 2 to 10.10.10.30:36608 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x2d816730040ada827c0d0203010001300d06092a8648 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x602b39b6bf596b689a9c8722b33c15fa Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.10.10.30:36608, id=3, length=168 Calling-Station-Id = "00-17-C4-27-4E-F6" Message-Authenticator = 0x5f5b2e255b96a1f4a454db5037690ef6 EAP-Message = 0x02b600061500 Framed-MTU = 3795 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 State = 0x602b39b6bf596b689a9c8722b33c15fa WiMAX-Attr-46 = 0x00111111323200 Service-Type = Framed-User WiMAX-Attr-1 = 0x000105312e3202030203030a WiMAX-Attr-36 = 0x0000000001 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 182 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation rlm_eap: try to find eap sim reauthentication_id anonymous modcall[authorize]: module "eap" returns updated for request 2 modcall[authorize]: module "files" returns notfound for request 2 modcall: group authorize returns updated for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 handler->eap_ds->request->code 1 modcall[authenticate]: module "eap" returns handled for request 2 modcall: group authenticate returns handled for request 2 Sending Access-Challenge of id 3 to 10.10.10.30:36608 EAP-Message = 0x01b701b11580000005a786f70d010104050003818100321f6dace1aa2f6e55d16f64eb6363393119b3da5c41a7127c7b46e0931d115b6ecb9f52a33868ab8e969dc418740767936cb9f9da02837b868ba824fcad2df8fe3a2fe5cff8dac483603ce312e0218bb93681b208d15fe55ac185416d56696c75d5dd0d8981f3b49962b3b23608fd7010e0ccd32501a7240ec82973066c7332160301010d0c0001090040ea491ab5e523f0f500b96463241287517f2ef085934a4977d6d7484bdfd4dadf7eb552b0e7e3154925eea5c6ad362d72e39a694dfaf9a0bc58dc18aa0e638f0b0001020040d53de1ff1fa11fa362939e46eea0d8fcb3f2dae937d80e EAP-Message = 0xf12c16be1d97147d2a813444501aca6c4c68dc8d6ecf5843f34b1a97bc4e8ad389273f9d7bda810c8200804c469e710f673e55b66208bc8b6b4827d01983e327ac390cb640e2282e1d6d103af7fd713228efa8f47d9640b9e9e9b1a78281253026d72be8ea192c7be32e4aec8ef75048dcf544b47ad84044e171824783f4e94b02281f977c751a696cb5315914202382672ee63a86ee25a3afc799d26410a255d7cb9b514bc0e45fd7fb0d16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xde4a9958375d68dad732478440967874 Finished request 2 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.10.10.30:36608, id=4, length=302 Calling-Station-Id = "00-17-C4-27-4E-F6" Message-Authenticator = 0xb72fd1d173bbc40e322082aa7ee4d4f0 EAP-Message = 0x02b7008c1500160301004610000042004046944e539d611e1e48d56244c319f6ebae7e2128aa69620674300bcc69a1ca557bbc09bf1c92b6c71632f1393bccbcd40737407924b86ca4ed79600116af5f3b14030100010116030100309155ed81299ee66d29e6411f190129c50bf037508aa342d197199fd132dc5784cd41b6ab84e3ff9b0eee94ead944884c Framed-MTU = 3795 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 State = 0xde4a9958375d68dad732478440967874 WiMAX-Attr-46 = 0x00111111323200 Service-Type = Framed-User WiMAX-Attr-1 = 0x000105312e3202030203030a WiMAX-Attr-36 = 0x0000000001 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 183 length 140 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation rlm_eap: try to find eap sim reauthentication_id anonymous modcall[authorize]: module "eap" returns updated for request 3 modcall[authorize]: module "files" returns notfound for request 3 modcall: group authorize returns updated for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake rlm_eap_tls: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established sesssion resume success is 0 hit in SSL is 0 eaptls_process returned 13 handler->eap_ds->request->code 1 modcall[authenticate]: module "eap" returns handled for request 3 modcall: group authenticate returns handled for request 3 Sending Access-Challenge of id 4 to 10.10.10.30:36608 EAP-Message = 0x01b8004515800000003b140301000101160301003030e4fdab7d67dceb91c5697db6def4f8eef177f0c0667eb7b2e10b914938020a110b62b9a8c58294fb7167ddcf632198 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb05f2612324e0b8f554a931e7aae884f Finished request 3 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.10.10.30:36608, id=5, length=322 Calling-Station-Id = "00-17-C4-27-4E-F6" Message-Authenticator = 0xbd2e299da68c0fce570a7ef495dc2008 EAP-Message = 0x02b800a0150017030100201bf58767a5d5d3de9a4ea315b6083fc742131fb6cd02501ac769823319ddd6b517030100707a91d2dc588840ddf0919e765f88b2f51699304770c74123e77c9d93a5737536b3d51a33a9a48db31b1053c063d33810882c8c86892254de58ddd7ebd93ad670f49b84519cef0a85a7a23a8b78d00fe193b6c12ae296a9e7d35a8567bed40b4abdd238830797ab0c4533203a6b3a0cb8 Framed-MTU = 3795 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 State = 0xb05f2612324e0b8f554a931e7aae884f WiMAX-Attr-46 = 0x00111111323200 Service-Type = Framed-User WiMAX-Attr-1 = 0x000105312e3202030203030a WiMAX-Attr-36 = 0x0000000001 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 184 length 160 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation rlm_eap: try to find eap sim reauthentication_id anonymous modcall[authorize]: module "eap" returns updated for request 4 modcall[authorize]: module "files" returns notfound for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/ttls rlm_eap: processing type ttls rlm_eap_ttls: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 handler->eap_ds->request->code 0 rlm_eap_ttls: Session established. Proceeding to decode tunneled attributes. before BIO_write in eapttls_process,data_len is 154 after SSL_read in eapttls_process,err is 76 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 rlm_chap: Setting 'Auth-Type := CHAP' modcall[authorize]: module "chap" returns ok for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: Looking up realm "asb.com" for User-Name = "myuser44@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "myuser44" rlm_realm: Proxying request from user myuser44 to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 4 users: Matched entry myuser44 at line 139 modcall[authorize]: module "files" returns ok for request 4 modcall: group authorize returns ok for request 4 rad_check_password: Found Auth-Type CHAP auth: type "CHAP" Processing the authenticate section of radiusd.conf modcall: entering group Auth-Type for request 4 rlm_chap: login attempt by "myuser44" with CHAP password rlm_chap: Using clear text password mypass@wd for user myuser44 authentication. rlm_chap: chap user myuser44 authenticated succesfully modcall[authenticate]: module "chap" returns ok for request 4 modcall: group Auth-Type returns ok for request 4 TTLS: Got tunneled Access-Accept modcall[authenticate]: module "eap" returns ok for request 4 modcall: group authenticate returns ok for request 4 Sending Access-Accept of id 5 to 10.10.10.30:36608 Session-Timeout = 3600 Termination-Action = RADIUS-Request Service-Flow-Descriptor = 0x000104008302040083040303050304060301070383080384 QoS-Descriptor += 0x000103830403020606000f40000c0302 QoS-Descriptor += 0x000103840403020606001f40000c0302 MS-MPPE-Recv-Key = 0x8a3b613e1d64e0a0336d2e60e2fb0632b6a43cc6b3d5d2b4e5567d1a96192ce4 MS-MPPE-Send-Key = 0x6e80df49b3c1508922184f681e1ce50d92c8be285caffd8ade63819b62a39f71 EAP-Message = 0x03b80004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "anonymous" State = 0x2c1b82994bd0419cabdcaf1926213bd5 Finished request 4 Going to the next request Waking up in 5 seconds... rad_recv: Accounting-Request packet from host 10.10.10.30:36609, id=1, length=154 User-Name = "anonymous@asb.com" NAS-IP-Address = 10.10.10.30 Calling-Station-Id = "00-17-C4-27-4E-F6" Acct-Status-Type = Start Acct-Session-Id = "e5f90e4870000000" Framed-IP-Address = 172.25.240.220 WiMAX-Attr-46 = 0x00111111323200 WiMAX-Attr-25 = 0x0000 WiMAX-Attr-22 = 0x0000000001 WiMAX-Attr-26 = 0x000083 WiMAX-Attr-27 = 0x000000 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 5 modcall[preacct]: module "preprocess" returns noop for request 5 rlm_acct_unique: WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent rlm_acct_unique: Hashing ',Client-IP-Address = 10.10.10.30,NAS-IP-Address = 10.10.10.30,Acct-Session-Id = "e5f90e4870000000",User-Name = "anonymous@asb.com"' rlm_acct_unique: Acct-Unique-Session-ID = "9eb31fd06ccabd09". modcall[preacct]: module "acct_unique" returns ok for request 5 rlm_realm: Looking up realm "asb.com" for User-Name = "anonymous@asb.com" rlm_realm: Found realm "asb.com" rlm_realm: Adding Stripped-User-Name = "anonymous" rlm_realm: Proxying request from user anonymous to realm asb.com rlm_realm: Adding Realm = "asb.com" rlm_realm: Accounting realm is LOCAL. modcall[preacct]: module "suffix" returns noop for request 5 modcall[preacct]: module "files" returns noop for request 5 modcall: group preacct returns ok for request 5 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 5 radius_xlat: '/udir/RADIUS-102.INSTALLED//var/log/radius/radacct/10.10.10.30/detail-20080430' rlm_detail: /udir/RADIUS-102.INSTALLED//var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /udir/RADIUS-102.INSTALLED//var/log/radius/radacct/10.10.10.30/detail-20080430 modcall[accounting]: module "detail" returns ok for request 5 modcall[accounting]: module "unix" returns noop for request 5 radius_xlat: '/udir/RADIUS-102.INSTALLED//var/log/radius/radutmp' radius_xlat: 'anonymous@asb.com' modcall[accounting]: module "radutmp" returns ok for request 5 modcall: group accounting returns ok for request 5 Sending Accounting-Response of id 1 to 10.10.10.30:36609 Finished request 5 Going to the next request --- Walking the entire request list --- Cleaning up request 5 ID 1 with timestamp 48186474 Waking up in 3 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 1 with timestamp 48186471 Cleaning up request 1 ID 2 with timestamp 48186471 Cleaning up request 2 ID 3 with timestamp 48186471 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 3 ID 4 with timestamp 48186472 Cleaning up request 4 ID 5 with timestamp 48186472 Nothing to do. Sleeping until we see a request.