No change it seems. 3.0.21 debug log: # freeradius -X FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.3.22 mysql { tls { tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.88.1 (mikrotik) to global clients list rlm_sql (192.168.88.1): Client "mikrotik" (sql) added rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list rlm_sql (127.0.0.1): Client "localhost" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/radius.key" certificate_file = "/etc/ssl/certs/radius.pem" ca_file = "/etc/ssl/certs/vpnca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned using only TLS 1.2 for security Please set: tls_min_version = "1.2" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on proxy address * port 42087 Ready to process requests (0) Received Access-Request Id 153 from 192.168.88.1:52051 to 192.168.88.10:1812 length 130 (0) User-Name = "ios" (0) Called-Station-Id = "184.167.60.170" (0) Calling-Station-Id = "174.209.8.201" (0) NAS-Port-Id = "\000\000\000\r" (0) NAS-Port-Type = Virtual (0) Service-Type = Framed-User (0) Event-Timestamp = "Jun 4 2020 19:32:18 BST" (0) Framed-MTU = 1400 (0) EAP-Message = 0x0200000801696f73 (0) Message-Authenticator = 0xe7cb31842ae403de62c2fa71b99e6bd8 (0) NAS-Identifier = "MikroTik" (0) NAS-IP-Address = 192.168.88.1 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "ios", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x51f4017451f5051f (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 153 from 192.168.88.10:1812 to 192.168.88.1:52051 length 0 (0) EAP-Message = 0x010100160410d1d733243bbc8bc239df01da0c557ebe (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x51f4017451f5051f9a74b646ecb55fd8 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 154 from 192.168.88.1:36441 to 192.168.88.10:1812 length 148 (1) User-Name = "ios" (1) Called-Station-Id = "184.167.60.170" (1) Calling-Station-Id = "174.209.8.201" (1) NAS-Port-Id = "\000\000\000\r" (1) NAS-Port-Type = Virtual (1) Service-Type = Framed-User (1) Event-Timestamp = "Jun 4 2020 19:32:18 BST" (1) Framed-MTU = 1400 (1) State = 0x51f4017451f5051f9a74b646ecb55fd8 (1) EAP-Message = 0x0201000803191a0d (1) Message-Authenticator = 0xda6261083b86f5401d332fd0c2846626 (1) NAS-Identifier = "MikroTik" (1) NAS-IP-Address = 192.168.88.1 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "ios", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) sql: EXPAND %{User-Name} (1) sql: --> ios (1) sql: SQL-User-Name set to 'ios' rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 163 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 163 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 163 seconds rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 163 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 163 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 163 seconds rlm_sql (sql): You probably need to lower "min" rlm_sql_mysql: Socket destructor called, closing socket rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (6), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Reserved connection (6) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'ios' ORDER BY id (1) sql: User found in radcheck table (1) sql: Conditional check items matched, merging assignment check items (1) sql: Cleartext-Password := "bzGCJedi" (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'ios' ORDER BY id rlm_sql (sql): 1 of 1 connections in use. You may need to increase "spare" rlm_sql (sql): Opening additional connection (7), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 rlm_sql (sql): Reserved connection (7) rlm_sql (sql): Released connection (7) Need 1 more connections to reach min connections (3) rlm_sql (sql): Opening additional connection (8), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'ios' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (6) (1) [sql] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x51f4017451f5051f (1) eap: Finished EAP session with state 0x51f4017451f5051f (1) eap: Previous EAP request found for state 0x51f4017451f5051f, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0x51f4017450f6181f (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 154 from 192.168.88.10:1812 to 192.168.88.1:36441 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x51f4017450f6181f9a74b646ecb55fd8 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 155 from 192.168.88.1:53917 to 192.168.88.10:1812 length 301 (2) User-Name = "ios" (2) Called-Station-Id = "184.167.60.170" (2) Calling-Station-Id = "174.209.8.201" (2) NAS-Port-Id = "\000\000\000\r" (2) NAS-Port-Type = Virtual (2) Service-Type = Framed-User (2) Event-Timestamp = "Jun 4 2020 19:32:18 BST" (2) Framed-MTU = 1400 (2) State = 0x51f4017450f6181f9a74b646ecb55fd8 (2) EAP-Message = 0x020200a119800000009716030100920100008e03035ed9b8e1c31a0ef3c2918444ede2f6002bb442a605bcd8ed7bc14ffc04b3ba5700002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (2) Message-Authenticator = 0x3fea641179846ecac63d31ec368ec77d (2) NAS-Identifier = "MikroTik" (2) NAS-IP-Address = 192.168.88.1 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "ios", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x51f4017450f6181f (2) eap: Finished EAP session with state 0x51f4017450f6181f (2) eap: Previous EAP request found for state 0x51f4017450f6181f, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: TLS_accept: before SSL initialization (2) eap_peap: <<< recv TLS 1.3 [length 0092] (2) eap_peap: TLS_accept: SSLv3/TLS read client hello (2) eap_peap: >>> send TLS 1.2 [length 003d] (2) eap_peap: TLS_accept: SSLv3/TLS write server hello (2) eap_peap: >>> send TLS 1.2 [length 089a] (2) eap_peap: TLS_accept: SSLv3/TLS write certificate (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: SSLv3/TLS write key exchange (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: SSLv3/TLS write server done (2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (2) eap_peap: TLS - In Handshake Phase (2) eap_peap: TLS - got 2620 bytes of data (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0x51f4017453f7181f (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 155 from 192.168.88.10:1812 to 192.168.88.1:53917 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x51f4017453f7181f9a74b646ecb55fd8 (2) Finished request Waking up in 4.6 seconds. (3) Received Access-Request Id 156 from 192.168.88.1:40390 to 192.168.88.10:1812 length 146 (3) User-Name = "ios" (3) Called-Station-Id = "184.167.60.170" (3) Calling-Station-Id = "174.209.8.201" (3) NAS-Port-Id = "\000\000\000\r" (3) NAS-Port-Type = Virtual (3) Service-Type = Framed-User (3) Event-Timestamp = "Jun 4 2020 19:32:18 BST" (3) Framed-MTU = 1400 (3) State = 0x51f4017453f7181f9a74b646ecb55fd8 (3) EAP-Message = 0x020300061900 (3) Message-Authenticator = 0x8c845669a62fb27c61e9026baa17b166 (3) NAS-Identifier = "MikroTik" (3) NAS-IP-Address = 192.168.88.1 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "ios", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x51f4017453f7181f (3) eap: Finished EAP session with state 0x51f4017453f7181f (3) eap: Previous EAP request found for state 0x51f4017453f7181f, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1000 (3) eap: EAP session adding &reply:State = 0x51f4017452f0181f (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 156 from 192.168.88.10:1812 to 192.168.88.1:40390 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x51f4017452f0181f9a74b646ecb55fd8 (3) Finished request Waking up in 4.4 seconds. (4) Received Access-Request Id 157 from 192.168.88.1:43517 to 192.168.88.10:1812 length 146 (4) User-Name = "ios" (4) Called-Station-Id = "184.167.60.170" (4) Calling-Station-Id = "174.209.8.201" (4) NAS-Port-Id = "\000\000\000\r" (4) NAS-Port-Type = Virtual (4) Service-Type = Framed-User (4) Event-Timestamp = "Jun 4 2020 19:32:19 BST" (4) Framed-MTU = 1400 (4) State = 0x51f4017452f0181f9a74b646ecb55fd8 (4) EAP-Message = 0x020400061900 (4) Message-Authenticator = 0x57de9d9d710e2fff1bc37411464d2b61 (4) NAS-Identifier = "MikroTik" (4) NAS-IP-Address = 192.168.88.1 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "ios", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x51f4017452f0181f (4) eap: Finished EAP session with state 0x51f4017452f0181f (4) eap: Previous EAP request found for state 0x51f4017452f0181f, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 638 (4) eap: EAP session adding &reply:State = 0x51f4017455f1181f (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 157 from 192.168.88.10:1812 to 192.168.88.1:43517 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x51f4017455f1181f9a74b646ecb55fd8 (4) Finished request Waking up in 4.3 seconds. (5) Received Access-Request Id 158 from 192.168.88.1:44093 to 192.168.88.10:1812 length 157 (5) User-Name = "ios" (5) Called-Station-Id = "184.167.60.170" (5) Calling-Station-Id = "174.209.8.201" (5) NAS-Port-Id = "\000\000\000\r" (5) NAS-Port-Type = Virtual (5) Service-Type = Framed-User (5) Event-Timestamp = "Jun 4 2020 19:32:19 BST" (5) Framed-MTU = 1400 (5) State = 0x51f4017455f1181f9a74b646ecb55fd8 (5) EAP-Message = 0x0205001119800000000715030300020100 (5) Message-Authenticator = 0xc781820d3a81d7d88f38f663959561f3 (5) NAS-Identifier = "MikroTik" (5) NAS-IP-Address = 192.168.88.1 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "ios", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 17 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x51f4017455f1181f (5) eap: Finished EAP session with state 0x51f4017455f1181f (5) eap: Previous EAP request found for state 0x51f4017455f1181f, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 7 bytes (5) eap_peap: Got complete TLS record (7 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0002] (5) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (5) eap_peap: TLS - In Handshake Phase (5) eap_peap: TLS - Application data. (5) eap_peap: ERROR: TLS failed during operation (5) eap_peap: ERROR: [eaptls process] = fail (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (5) eap: Sending EAP Failure (code 4) ID 5 length 4 (5) eap: Failed in EAP select (5) [eap] = invalid (5) } # authenticate = invalid (5) Failed to authenticate the user (5) Using Post-Auth-Type Reject (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Post-Auth-Type REJECT { (5) sql: EXPAND .query (5) sql: --> .query (5) sql: Using query template 'query' rlm_sql (sql): Reserved connection (6) (5) sql: EXPAND %{User-Name} (5) sql: --> ios (5) sql: SQL-User-Name set to 'ios' (5) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M') (5) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-05 04:15:31.505623') (5) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'ios', '', 'Access-Reject', '2020-06-05 04:15:31.505623') (5) sql: SQL query returned: success (5) sql: 1 record(s) updated rlm_sql (sql): Released connection (6) Need 7 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (9), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.22-MariaDB-1, protocol version 10 (5) [sql] = ok (5) attr_filter.access_reject: EXPAND %{User-Name} (5) attr_filter.access_reject: --> ios (5) attr_filter.access_reject: Matched entry DEFAULT at line 11 (5) [attr_filter.access_reject] = updated (5) [eap] = noop (5) policy remove_reply_message_if_eap { (5) if (&reply:EAP-Message && &reply:Reply-Message) { (5) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (5) else { (5) [noop] = noop (5) } # else = noop (5) } # policy remove_reply_message_if_eap = noop (5) } # Post-Auth-Type REJECT = updated (5) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (5) (5) Discarding duplicate request from client mikrotik port 44093 - ID: 158 due to delayed response (5) Sending delayed response (5) Sent Access-Reject Id 158 from 192.168.88.10:1812 to 192.168.88.1:44093 length 44 (5) EAP-Message = 0x04050004 (5) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.1 seconds. (0) Cleaning up request packet ID 153 with timestamp +163 Waking up in 0.1 seconds. (1) Cleaning up request packet ID 154 with timestamp +163 Waking up in 0.2 seconds. (2) Cleaning up request packet ID 155 with timestamp +163 Waking up in 0.1 seconds. (3) Cleaning up request packet ID 156 with timestamp +164 Waking up in 0.1 seconds. (4) Cleaning up request packet ID 157 with timestamp +164 Waking up in 0.2 seconds. (5) Cleaning up request packet ID 158 with timestamp +164 Ready to process requests On Thu, Jun 4, 2020, at 2:47 PM, Alan DeKok wrote:

On Jun 4, 2020, at 2:14 PM, Michael Parks <mparks@tkware.info> wrote:

...

I am attempting to authenticate iPhone clients using the built in IPSEC client with a username/password. Configuration is a MikroTik router hosting the VPN, using a separate FreeRADIUS server on Ubuntu 18.04 for AAA.

The iPhone seems to require EAP-TLS for this configuration. I've set up the appropriate CA, certificate, and private key, and verified that these all match up using OpenSSL (same modulus on the cert and key, -verify shows that the cert can be verified up to the installed CA cert)

My current configuration results in a "ERROR: TLS failed during operation" message, and an authentication failure, whenever iPhone clients try to log in. No further information as to the precise nature of the TLS failure appears to be visible in the debug output.

Speaking of which, here it is. The only actions taken were starting freeradius and attempting to log in with the iPhone:

--- FreeRADIUS Version 3.0.17

The short summary is upgrade to 3.0.21. See http://packages.networkradius.com for instructions.

We've put minor tweaks in over the years to fix corner cases. I suspect this is what you're running into here.

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

I think I might need to try with different certs. I've read rumblings that MikroTik's built-in PKI can cause strange problems in other instances, and it may be the same thing here. (Supposedly it's perfectly standard X509, but..) Anything a mere mortal with little C experience can do to get better info as to the failure cause? On Fri, Jun 5, 2020, at 6:21 AM, Alan DeKok wrote:

On Jun 4, 2020, at 11:17 PM, Michael Parks <mparks@tkware.info> wrote:

...

No change it seems.

Hmm... that's harder to tell them.

The issue is that the function tls_handshake_recv() is returning 0, but isn't printing a message saying why. You'll have to instrument the code to see.

I've seen other issues with iPhones getting connected. But never this.

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Let's see.. (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 7 bytes (5) eap_peap: Got complete TLS record (7 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: HERE 700 (5) eap_peap: HERE 702 (5) eap_peap: <<< recv TLS 1.2 [length 0002] (5) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (5) eap_peap: HERE 723 (5) eap_peap: TLS - In Handshake Phase (5) eap_peap: TLS - Application data. (5) eap_peap: HERE 842 (5) eap_peap: ERROR: TLS failed during operation (5) eap_peap: ERROR: [eaptls process] = fail (5) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed 842 being above the function's final "return 1". I got curious and hooked it up to gdb and stepped through to the failure point. The "TLS failed during operation" error is coming out of modules/rlm_eap/libeap/eap_tls.c:756. The contents of tls_session->dirty_out at the time were: $2 = { data = " RouterOS0\r\006\t*\206H\206\367\r\001\001\v\005\000\003\202\001\001\000ShU`\333g~\272\341\273\316\tO\211\335\302-\235\067\361e\a\357'\245\260\343\216*\034}\030\275yve2\261\201\212\253A\204\005\270iQ\262\230\377\017'\t_\263\371z\272\275\315\271\312Ȧ\374\034\231\304άa\332\370\242u\366\274M\272\316v{\032|\350\060.]\006\070V\267C\200\bZY+\323\375\245\360\330\372\204q\205\367\ty~\207\210\352\004\347\304hX\244\003\257\035\066\003\371:\263\031\352\002#\035\273D\253r\033.\350\035\301\216\023\364\275'\303\006\317f!\016p\230~\367\064x\346\343\"\334\024f&\213\262{wHu\033\372"..., used = 0} ..which, given prior experience with MikroTik, leads me to believe that this router is talking nonsense to RADIUS.. On Fri, Jun 5, 2020, at 10:22 AM, Alan DeKok wrote:

On Jun 5, 2020, at 11:54 AM, Michael Parks <mparks@tkware.info> wrote:

...

I think I might need to try with different certs. I've read rumblings that MikroTik's built-in PKI can cause strange problems in other instances, and it may be the same thing here. (Supposedly it's perfectly standard X509, but..)

Anything a mere mortal with little C experience can do to get better info as to the failure cause?

Edit src/main/tls.c, look for the function tls_handshake_recv()

Instrument it by just adding this in a bunch of places in the function:

RDEBUG("HERE %d", __LINE__);

Make sure to also add it before each "return 0"

... { RDEBUG("HERE %d", __LINE__); return 0;

}

And then post the one packet here which says "TLS failed during operation"

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

On Jun 4, 2020, at 11:17 PM, Michael Parks <mparks@tkware.info> wrote:

...

No change it seems.

Hmm... that's harder to tell them.

The issue is that the function tls_handshake_recv() is returning 0, but isn't printing a message saying why. You'll have to instrument the code to see.

I've seen other issues with iPhones getting connected. But never this.

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

PR - How May We Assist? KBA-01143-R4Z7T7 Specialty Services Dear Valued Customer, Thank you for your inquiry. Please let us know how we may assist you. If you have a Renter’s policy, you can manage your policy online 24/7 at: https://www.myassurantpolicy.com/ You have access to a range of service options including: * View/update policy information * Manage your payments * Obtain proof of insurance * And much more Thank you for allowing us the opportunity to serve you. Sincerely, Insurance Services Assurant - Global Specialty Operations ------------------- Original Message ------------------- From: Michael Parks Received: Fri Jun 05 2020 11:55:25 GMT-0400 (Eastern Daylight Time) To: Cornelius Kölbel via Freeradius-Users Subject: Re: Troubleshooting "TLS failed during operation" with EAP-TLS I think I might need to try with different certs. I've read rumblings that MikroTik's built-in PKI can cause strange problems in other instances, and it may be the same thing here. (Supposedly it's perfectly standard X509, but..) Anything a mere mortal with little C experience can do to get better info as to the failure cause? On Fri, Jun 5, 2020, at 6:21 AM, Alan DeKok wrote: - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ********************************************************************** This e-mail message and all attachments transmitted with it may contain legally privileged and/or confidential information intended solely for the use of the addressee(s). If the reader of this message is not the intended recipient, you are hereby notified that any reading, dissemination, distribution, copying, forwarding or other use of this message or its attachments is strictly prohibited. If you have received this message in error, please notify the sender immediately and delete this message and all copies and backups thereof. Thank you.