Re: EAP-MD5 client"rlm_eap_md5 : Password is required for EAP-MD5 Authentication...
The users entry is simply con_d User-Password == "con_d" Following is the complete output from radiusd -X for this session. -------------------------------------------------------------------------- rad_recv: Access-Request packet from host 127.0.0.1:57462, id=177, length=63 User-Name = "con_d" NAS-Identifier = "rick" Message-Authenticator = 0x41a96ed8d52b06609f0494aad2d72ec3 EAP-Message = 0x0200000a01636f6e5f64 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 177 to 127.0.0.1 port 57462 EAP-Message = 0x010100160410a131cb5c1dfa691706698917cca1d605 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x18e8cdd7c4ac2d196d1ef47984a6d93d Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:57462, id=178, length=93 User-Name = "con_d" NAS-Identifier = "rick" State = 0x18e8cdd7c4ac2d196d1ef47984a6d93d Message-Authenticator = 0x1e22731000e713b820036170372aa1aa EAP-Message = 0x020100160410c1ee4a2cc4f49f6bb16d640ad87ccf1a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/md5 rlm_eap: processing type md5 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 1 modcall: leaving group authenticate (returns reject) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 177 with timestamp 46b63f47 Sending Access-Reject of id 178 to 127.0.0.1 port 57462 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 1 ID 178 with timestamp 46b63f47 Nothing to do. Sleeping until we see a request. -- _______________________________________________ Get your free email from http://bsdmail.com
Use cleartext password: con_d Cleartext-Password:="con_d" Ivan Kalik Kalik Informatika ISP Dana 5/8/2007, "rick norman" <gumbo_2007@bsdmail.com> piše:
The users entry is simply
con_d User-Password == "con_d"
Following is the complete output from radiusd -X for this session.
--------------------------------------------------------------------------
rad_recv: Access-Request packet from host 127.0.0.1:57462, id=177, length=63 User-Name = "con_d" NAS-Identifier = "rick" Message-Authenticator = 0x41a96ed8d52b06609f0494aad2d72ec3 EAP-Message = 0x0200000a01636f6e5f64 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 177 to 127.0.0.1 port 57462 EAP-Message = 0x010100160410a131cb5c1dfa691706698917cca1d605 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x18e8cdd7c4ac2d196d1ef47984a6d93d Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:57462, id=178, length=93 User-Name = "con_d" NAS-Identifier = "rick" State = 0x18e8cdd7c4ac2d196d1ef47984a6d93d Message-Authenticator = 0x1e22731000e713b820036170372aa1aa EAP-Message = 0x020100160410c1ee4a2cc4f49f6bb16d640ad87ccf1a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/md5 rlm_eap: processing type md5 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 1 modcall: leaving group authenticate (returns reject) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 177 with timestamp 46b63f47 Sending Access-Reject of id 178 to 127.0.0.1 port 57462 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 1 ID 178 with timestamp 46b63f47 Nothing to do. Sleeping until we see a request.
-- _______________________________________________ Get your free email from http://bsdmail.com
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (2)
-
rick norman -
tnt@kalik.co.yu