rick norman wrote:

...

----- Original Message ----- From: tnt@kalik.co.yu To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Subject: Re: EAP-MD5client"rlm_eap_md5 : Password is required for EAP-MD5 Authentication... Date: Mon, 06 Aug 2007 00:39:26 +0100

Use cleartext password:

con_d Cleartext-Password:="con_d"

Okay, I tried Cleartext-Password as well as ==. Still fails.

Following is the new complete output from radiusd -X for this session.

Are you using an old version of FreeRADIUS ? Cleartext password wasn't available in some of the earlier versions. In that case use: con_d User-Password := "con_d"

--------------------------------------------------------------------------------

rad_recv: Access-Request packet from host 127.0.0.1:57360, id=184, length=63 User-Name = "con_d" NAS-Identifier = "rick" Message-Authenticator = 0x5f4c08498fcee5d8497d0a1ec083a4d0 EAP-Message = 0x0200000a01636f6e5f64 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 10 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 184 to 127.0.0.1 port 57360 EAP-Message = 0x010100160410e18639eeac9b901b1e0bd3444aca06f2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6b43db4b270e35f227bf224ccd168b04 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:57360, id=185, length=93 User-Name = "con_d" NAS-Identifier = "rick" State = 0x6b43db4b270e35f227bf224ccd168b04 Message-Authenticator = 0xca15f35d9c82f222c56e62e34928f6f1 EAP-Message = 0x02010016041037ab0f881c1fa98e477b0a5ad546b160 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 22 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry con_d at line 138 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/md5 rlm_eap: processing type md5 rlm_eap_md5: User-Password is required for EAP-MD5 authentication rlm_eap: Handler failed in EAP/md5 rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 184 with timestamp 46b647b8 Sending Access-Reject of id 185 to 127.0.0.1 port 57360 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 1 ID 185 with timestamp 46b647b8 Nothing to do. Sleeping until we see a request.