Freeradius - eapol testing failure
Hi all, thanks for your help in advance. I have spent the last week trying to solve this issue, I have read and read all information I can find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl. For the freeradius I have followed the guides by each detail in full, the only exception is replacing etc/raddb with etc/freeradius/3.0. The freeradius server is set up and running and I have completed testing with local host using radtest and eapol. Test results: PAP Localhost = Ok, passes - used radtest bob hello localhost 0 testing123 EAP (using EAPOL) PEAPv0_EAP-MSCHAPv2 = Ok, Passes EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes Good so far, next I edit EAPOL test scripts to uncomment so as to use the test certs for testing. The only thing I changed here was /etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to point test utility to the correct directory. EAP (using EAPOL with cert check uncommented) PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA I followed deployingradius, and used make to build certs, they are all populated in the directory, but tests repeatedly fail. This same error comes up repeatedly across peap and ttls using cert: Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed I am very new to radius, and I am trying to setup the server to test with some headless devices, and they need to be able to support PEAP, TLS, and TTLS with certs. I went as far as setting a completely identical server on another Pi and tried with production certificates, with same error. The only thing I notice different is that when I access the network with my iphone, the public cert it sends my iphone is completely different than any of the certs in /etc/freeradius/3.0/certs/. Verbose log: Sun Apr 14 16:55:58 2019 : Info: Ready to process requests Sun Apr 14 16:56:24 2019 : Debug: (0) Received Access-Request Id 0 from 127.0.0.1:44837 to 127.0.0.1:1812 length 132 Sun Apr 14 16:56:24 2019 : Debug: (0) User-Name = "anonymous" Sun Apr 14 16:56:24 2019 : Debug: (0) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:24 2019 : Debug: (0) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:24 2019 : Debug: (0) Framed-MTU = 1400 Sun Apr 14 16:56:24 2019 : Debug: (0) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:24 2019 : Debug: (0) Service-Type = Framed-User Sun Apr 14 16:56:24 2019 : Debug: (0) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:24 2019 : Debug: (0) EAP-Message = 0x0200000e01616e6f6e796d6f7573 Sun Apr 14 16:56:24 2019 : Debug: (0) Message-Authenticator = 0xead9e659e3e79e40d782c2383711cff4 Sun Apr 14 16:56:24 2019 : Debug: (0) session-state: No State attribute Sun Apr 14 16:56:24 2019 : Debug: (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (0) authorize { Sun Apr 14 16:56:24 2019 : Debug: (0) policy filter_username { Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name) -> TRUE Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ / /) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (0) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (0) } # if (&User-Name) = notfound Sun Apr 14 16:56:24 2019 : Debug: (0) } # policy filter_username = notfound Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (0) [preprocess] = ok Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (0) [chap] = noop Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (0) [mschap] = noop Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (0) [digest] = noop Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (0) suffix: Checking for suffix after "@" Sun Apr 14 16:56:24 2019 : Debug: (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:24 2019 : Debug: (0) suffix: No such realm "NULL" Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (0) [suffix] = noop Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 Sun Apr 14 16:56:24 2019 : Debug: (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (0) [eap] = ok Sun Apr 14 16:56:24 2019 : Debug: (0) } # authorize = ok Sun Apr 14 16:56:24 2019 : Debug: (0) Found Auth-Type = eap Sun Apr 14 16:56:24 2019 : Debug: (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (0) authenticate { Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (0) eap: Peer sent packet with method EAP Identity (1) Sun Apr 14 16:56:24 2019 : Debug: (0) eap: Calling submodule eap_peap to process data Sun Apr 14 16:56:24 2019 : Debug: (0) eap_peap: Initiating new EAP-TLS session Sun Apr 14 16:56:24 2019 : Debug: (0) eap_peap: [eaptls start] = request Sun Apr 14 16:56:24 2019 : Debug: (0) eap: Sending EAP Request (code 1) ID 1 length 6 Sun Apr 14 16:56:24 2019 : Debug: (0) eap: EAP session adding &reply:State = 0x4c3c07a54c3d1ed6 Sun Apr 14 16:56:24 2019 : Debug: (0) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (0) [eap] = handled Sun Apr 14 16:56:24 2019 : Debug: (0) } # authenticate = handled Sun Apr 14 16:56:24 2019 : Debug: (0) Using Post-Auth-Type Challenge Sun Apr 14 16:56:24 2019 : Debug: (0) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:24 2019 : Debug: (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (0) session-state: Nothing to cache Sun Apr 14 16:56:24 2019 : Debug: (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:44837 length 0 Sun Apr 14 16:56:24 2019 : Debug: (0) EAP-Message = 0x010100061920 Sun Apr 14 16:56:24 2019 : Debug: (0) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:24 2019 : Debug: (0) State = 0x4c3c07a54c3d1ed6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (0) Finished request Sun Apr 14 16:56:24 2019 : Debug: Waking up in 4.9 seconds. Sun Apr 14 16:56:24 2019 : Debug: (1) Received Access-Request Id 1 from 127.0.0.1:44837 to 127.0.0.1:1812 length 142 Sun Apr 14 16:56:24 2019 : Debug: (1) User-Name = "anonymous" Sun Apr 14 16:56:24 2019 : Debug: (1) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:24 2019 : Debug: (1) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:24 2019 : Debug: (1) Framed-MTU = 1400 Sun Apr 14 16:56:24 2019 : Debug: (1) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:24 2019 : Debug: (1) Service-Type = Framed-User Sun Apr 14 16:56:24 2019 : Debug: (1) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:24 2019 : Debug: (1) EAP-Message = 0x020100060315 Sun Apr 14 16:56:24 2019 : Debug: (1) State = 0x4c3c07a54c3d1ed6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (1) Message-Authenticator = 0x5386ab818c5886c5d02bdd9f60e6dfcc Sun Apr 14 16:56:24 2019 : Debug: (1) session-state: No cached attributes Sun Apr 14 16:56:24 2019 : Debug: (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (1) authorize { Sun Apr 14 16:56:24 2019 : Debug: (1) policy filter_username { Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name) -> TRUE Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ / /) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (1) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (1) } # if (&User-Name) = notfound Sun Apr 14 16:56:24 2019 : Debug: (1) } # policy filter_username = notfound Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (1) [preprocess] = ok Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (1) [chap] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (1) [mschap] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (1) [digest] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (1) suffix: Checking for suffix after "@" Sun Apr 14 16:56:24 2019 : Debug: (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:24 2019 : Debug: (1) suffix: No such realm "NULL" Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (1) [suffix] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 Sun Apr 14 16:56:24 2019 : Debug: (1) eap: No EAP Start, assuming it's an on-going EAP conversation Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (1) [eap] = updated Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling files (rlm_files) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from files (rlm_files) Sun Apr 14 16:56:24 2019 : Debug: (1) [files] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling expiration (rlm_expiration) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from expiration (rlm_expiration) Sun Apr 14 16:56:24 2019 : Debug: (1) [expiration] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling logintime (rlm_logintime) Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from logintime (rlm_logintime) Sun Apr 14 16:56:24 2019 : Debug: (1) [logintime] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: calling pap (rlm_pap) Sun Apr 14 16:56:24 2019 : WARNING: (1) pap: No "known good" password found for the user. Not setting Auth-Type Sun Apr 14 16:56:24 2019 : WARNING: (1) pap: Authentication will fail unless a "known good" password is available Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authorize]: returned from pap (rlm_pap) Sun Apr 14 16:56:24 2019 : Debug: (1) [pap] = noop Sun Apr 14 16:56:24 2019 : Debug: (1) } # authorize = updated Sun Apr 14 16:56:24 2019 : Debug: (1) Found Auth-Type = eap Sun Apr 14 16:56:24 2019 : Debug: (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (1) authenticate { Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Expiring EAP session with state 0x4c3c07a54c3d1ed6 Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Finished EAP session with state 0x4c3c07a54c3d1ed6 Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Previous EAP request found for state 0x4c3c07a54c3d1ed6, released from the list Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Peer sent packet with method EAP NAK (3) Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Found mutually acceptable type TTLS (21) Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:24 2019 : Debug: (1) eap_ttls: Initiating new EAP-TLS session Sun Apr 14 16:56:24 2019 : Debug: (1) eap_ttls: [eaptls start] = request Sun Apr 14 16:56:24 2019 : Debug: (1) eap: Sending EAP Request (code 1) ID 2 length 6 Sun Apr 14 16:56:24 2019 : Debug: (1) eap: EAP session adding &reply:State = 0x4c3c07a54d3e12d6 Sun Apr 14 16:56:24 2019 : Debug: (1) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (1) [eap] = handled Sun Apr 14 16:56:24 2019 : Debug: (1) } # authenticate = handled Sun Apr 14 16:56:24 2019 : Debug: (1) Using Post-Auth-Type Challenge Sun Apr 14 16:56:24 2019 : Debug: (1) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:24 2019 : Debug: (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (1) session-state: Nothing to cache Sun Apr 14 16:56:24 2019 : Debug: (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:44837 length 0 Sun Apr 14 16:56:24 2019 : Debug: (1) EAP-Message = 0x010200061520 Sun Apr 14 16:56:24 2019 : Debug: (1) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:24 2019 : Debug: (1) State = 0x4c3c07a54d3e12d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (1) Finished request Sun Apr 14 16:56:24 2019 : Debug: Waking up in 4.9 seconds. Sun Apr 14 16:56:24 2019 : Debug: (2) Received Access-Request Id 2 from 127.0.0.1:44837 to 127.0.0.1:1812 length 314 Sun Apr 14 16:56:24 2019 : Debug: (2) User-Name = "anonymous" Sun Apr 14 16:56:24 2019 : Debug: (2) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:24 2019 : Debug: (2) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:24 2019 : Debug: (2) Framed-MTU = 1400 Sun Apr 14 16:56:24 2019 : Debug: (2) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:24 2019 : Debug: (2) Service-Type = Framed-User Sun Apr 14 16:56:24 2019 : Debug: (2) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:24 2019 : Debug: (2) EAP-Message = 0x020200b2150016030100a7010000a303030fc026b5175fb0e4cda8fe23ff8fa6e73ba494c4 669c89a2e0635f57b23e5714000038c02cc030009fcca9cca8ccaac02bc02f009ec024c02800 6bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff0100004200 0b0004030001 Sun Apr 14 16:56:24 2019 : Debug: (2) State = 0x4c3c07a54d3e12d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (2) Message-Authenticator = 0x1c8acab50d8a7d872c7bceb067dd3ef6 Sun Apr 14 16:56:24 2019 : Debug: (2) session-state: No cached attributes Sun Apr 14 16:56:24 2019 : Debug: (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (2) authorize { Sun Apr 14 16:56:24 2019 : Debug: (2) policy filter_username { Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name) -> TRUE Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ / /) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (2) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (2) } # if (&User-Name) = notfound Sun Apr 14 16:56:24 2019 : Debug: (2) } # policy filter_username = notfound Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (2) [preprocess] = ok Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (2) [chap] = noop Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (2) [mschap] = noop Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (2) [digest] = noop Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (2) suffix: Checking for suffix after "@" Sun Apr 14 16:56:24 2019 : Debug: (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:24 2019 : Debug: (2) suffix: No such realm "NULL" Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (2) [suffix] = noop Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Peer sent EAP Response (code 2) ID 2 length 178 Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Continuing tunnel setup Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (2) [eap] = ok Sun Apr 14 16:56:24 2019 : Debug: (2) } # authorize = ok Sun Apr 14 16:56:24 2019 : Debug: (2) Found Auth-Type = eap Sun Apr 14 16:56:24 2019 : Debug: (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (2) authenticate { Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Expiring EAP session with state 0x4c3c07a54d3e12d6 Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Finished EAP session with state 0x4c3c07a54d3e12d6 Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Previous EAP request found for state 0x4c3c07a54d3e12d6, released from the list Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: Authenticate Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: [eaptls verify] = ok Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: Done initial handshake Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: (other): before SSL initialization Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: before SSL initialization Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: before SSL initialization Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: <<< recv TLS 1.2 [length 00a7] Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: SSLv3/TLS read client hello Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: >>> send TLS 1.2 [length 003d] Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: SSLv3/TLS write server hello Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: >>> send TLS 1.2 [length 02d9] Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: SSLv3/TLS write certificate Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: >>> send TLS 1.2 [length 014d] Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: SSLv3/TLS write key exchange Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: >>> send TLS 1.2 [length 0004] Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: SSLv3/TLS write server done Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: In SSL Handshake Phase Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: In SSL Accept mode Sun Apr 14 16:56:24 2019 : Debug: (2) eap_ttls: [eaptls process] = handled Sun Apr 14 16:56:24 2019 : Debug: (2) eap: Sending EAP Request (code 1) ID 3 length 1004 Sun Apr 14 16:56:24 2019 : Debug: (2) eap: EAP session adding &reply:State = 0x4c3c07a54e3f12d6 Sun Apr 14 16:56:24 2019 : Debug: (2) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (2) [eap] = handled Sun Apr 14 16:56:24 2019 : Debug: (2) } # authenticate = handled Sun Apr 14 16:56:24 2019 : Debug: (2) Using Post-Auth-Type Challenge Sun Apr 14 16:56:24 2019 : Debug: (2) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:24 2019 : Debug: (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (2) session-state: Nothing to cache Sun Apr 14 16:56:24 2019 : Debug: (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:44837 length 0 Sun Apr 14 16:56:24 2019 : Debug: (2) EAP-Message = 0x010303ec15c00000047b160303003d02000039030322f387796fa76cd3f629c70febc33563 5168e8e9a25f35594d2ef02cc43b108400c030000011ff01000100000b000403000102001700 0016030302d90b0002d50002d20002cf308202cb308201b3a003020102020900a1ccb3d7090c ca2e300d0609 Sun Apr 14 16:56:24 2019 : Debug: (2) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:24 2019 : Debug: (2) State = 0x4c3c07a54e3f12d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (2) Finished request Sun Apr 14 16:56:24 2019 : Debug: Waking up in 4.7 seconds. Sun Apr 14 16:56:24 2019 : Debug: (3) Received Access-Request Id 3 from 127.0.0.1:44837 to 127.0.0.1:1812 length 142 Sun Apr 14 16:56:24 2019 : Debug: (3) User-Name = "anonymous" Sun Apr 14 16:56:24 2019 : Debug: (3) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:24 2019 : Debug: (3) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:24 2019 : Debug: (3) Framed-MTU = 1400 Sun Apr 14 16:56:24 2019 : Debug: (3) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:24 2019 : Debug: (3) Service-Type = Framed-User Sun Apr 14 16:56:24 2019 : Debug: (3) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:24 2019 : Debug: (3) EAP-Message = 0x020300061500 Sun Apr 14 16:56:24 2019 : Debug: (3) State = 0x4c3c07a54e3f12d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (3) Message-Authenticator = 0xb32d0f7bc337b37f48ca11e11069aea7 Sun Apr 14 16:56:24 2019 : Debug: (3) session-state: No cached attributes Sun Apr 14 16:56:24 2019 : Debug: (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (3) authorize { Sun Apr 14 16:56:24 2019 : Debug: (3) policy filter_username { Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name) -> TRUE Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ / /) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (3) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (3) } # if (&User-Name) = notfound Sun Apr 14 16:56:24 2019 : Debug: (3) } # policy filter_username = notfound Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (3) [preprocess] = ok Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (3) [chap] = noop Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (3) [mschap] = noop Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (3) [digest] = noop Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (3) suffix: Checking for suffix after "@" Sun Apr 14 16:56:24 2019 : Debug: (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:24 2019 : Debug: (3) suffix: No such realm "NULL" Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (3) [suffix] = noop Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Continuing tunnel setup Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (3) [eap] = ok Sun Apr 14 16:56:24 2019 : Debug: (3) } # authorize = ok Sun Apr 14 16:56:24 2019 : Debug: (3) Found Auth-Type = eap Sun Apr 14 16:56:24 2019 : Debug: (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (3) authenticate { Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Expiring EAP session with state 0x4c3c07a54e3f12d6 Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Finished EAP session with state 0x4c3c07a54e3f12d6 Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Previous EAP request found for state 0x4c3c07a54e3f12d6, released from the list Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: Authenticate Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: Peer ACKed our handshake fragment Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: [eaptls verify] = request Sun Apr 14 16:56:24 2019 : Debug: (3) eap_ttls: [eaptls process] = handled Sun Apr 14 16:56:24 2019 : Debug: (3) eap: Sending EAP Request (code 1) ID 4 length 163 Sun Apr 14 16:56:24 2019 : Debug: (3) eap: EAP session adding &reply:State = 0x4c3c07a54f3812d6 Sun Apr 14 16:56:24 2019 : Debug: (3) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (3) [eap] = handled Sun Apr 14 16:56:24 2019 : Debug: (3) } # authenticate = handled Sun Apr 14 16:56:24 2019 : Debug: (3) Using Post-Auth-Type Challenge Sun Apr 14 16:56:24 2019 : Debug: (3) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:24 2019 : Debug: (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (3) session-state: Nothing to cache Sun Apr 14 16:56:24 2019 : Debug: (3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:44837 length 0 Sun Apr 14 16:56:24 2019 : Debug: (3) EAP-Message = 0x010400a315800000047b5c7b1b4e3291b8cee42f5c9200c2c1f08bd77a1b57eb89bef4ed8e 55c8fe597999d72fa937bc0e5c17f7835535a00e5745b4dcc68e53e2ed5661f4b0119b65d92b 2c38a1977290607e2e0a90197d2c08bbe43355447570454ad4df15887f0e456fa7e8f2834c70 5841c434ca49 Sun Apr 14 16:56:24 2019 : Debug: (3) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:24 2019 : Debug: (3) State = 0x4c3c07a54f3812d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (3) Finished request Sun Apr 14 16:56:24 2019 : Debug: Waking up in 4.6 seconds. Sun Apr 14 16:56:24 2019 : Debug: (4) Received Access-Request Id 4 from 127.0.0.1:44837 to 127.0.0.1:1812 length 149 Sun Apr 14 16:56:24 2019 : Debug: (4) User-Name = "anonymous" Sun Apr 14 16:56:24 2019 : Debug: (4) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:24 2019 : Debug: (4) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:24 2019 : Debug: (4) Framed-MTU = 1400 Sun Apr 14 16:56:24 2019 : Debug: (4) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:24 2019 : Debug: (4) Service-Type = Framed-User Sun Apr 14 16:56:24 2019 : Debug: (4) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:24 2019 : Debug: (4) EAP-Message = 0x0204000d150015030300020230 Sun Apr 14 16:56:24 2019 : Debug: (4) State = 0x4c3c07a54f3812d6dc41103157c60ec3 Sun Apr 14 16:56:24 2019 : Debug: (4) Message-Authenticator = 0x041e1ee45dad308103990e414cac95b0 Sun Apr 14 16:56:24 2019 : Debug: (4) session-state: No cached attributes Sun Apr 14 16:56:24 2019 : Debug: (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (4) authorize { Sun Apr 14 16:56:24 2019 : Debug: (4) policy filter_username { Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name) -> TRUE Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name) { Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ / /) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:24 2019 : Debug: No matches Sun Apr 14 16:56:24 2019 : Debug: (4) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) } # if (&User-Name) = notfound Sun Apr 14 16:56:24 2019 : Debug: (4) } # policy filter_username = notfound Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:24 2019 : Debug: (4) [preprocess] = ok Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:24 2019 : Debug: (4) [chap] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:24 2019 : Debug: (4) [mschap] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:24 2019 : Debug: (4) [digest] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (4) suffix: Checking for suffix after "@" Sun Apr 14 16:56:24 2019 : Debug: (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:24 2019 : Debug: (4) suffix: No such realm "NULL" Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:24 2019 : Debug: (4) [suffix] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Peer sent EAP Response (code 2) ID 4 length 13 Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Continuing tunnel setup Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) [eap] = ok Sun Apr 14 16:56:24 2019 : Debug: (4) } # authorize = ok Sun Apr 14 16:56:24 2019 : Debug: (4) Found Auth-Type = eap Sun Apr 14 16:56:24 2019 : Debug: (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (4) authenticate { Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Expiring EAP session with state 0x4c3c07a54f3812d6 Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Finished EAP session with state 0x4c3c07a54f3812d6 Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Previous EAP request found for state 0x4c3c07a54f3812d6, released from the list Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: Authenticate Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: [eaptls verify] = ok Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: Done initial handshake Sun Apr 14 16:56:24 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: <<< recv TLS 1.2 [length 0002] Sun Apr 14 16:56:24 2019 : ERROR: (4) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:24 2019 : Debug: (4) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:24 2019 : ERROR: (4) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sun Apr 14 16:56:24 2019 : ERROR: (4) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:24 2019 : ERROR: (4) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:24 2019 : ERROR: (4) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:24 2019 : ERROR: (4) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Sending EAP Failure (code 4) ID 4 length 4 Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Failed in EAP select Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) [eap] = invalid Sun Apr 14 16:56:24 2019 : Debug: (4) } # authenticate = invalid Sun Apr 14 16:56:24 2019 : Debug: (4) Failed to authenticate the user Sun Apr 14 16:56:24 2019 : Debug: (4) Using Post-Auth-Type Reject Sun Apr 14 16:56:24 2019 : Debug: (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:24 2019 : Debug: (4) Post-Auth-Type REJECT { Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter) Sun Apr 14 16:56:24 2019 : Debug: %{User-Name} Sun Apr 14 16:56:24 2019 : Debug: Parsed xlat tree: Sun Apr 14 16:56:24 2019 : Debug: attribute --> User-Name Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: EXPAND %{User-Name} Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: --> anonymous Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: Matched entry DEFAULT at line 11 Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: EAP-Message = 0x04040004 allowed by EAP-Message =* 0x Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: Attribute "EAP-Message" allowed by 1 rules, disallowed by 0 rules Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: Message-Authenticator = 0x00000000000000000000000000000000 allowed by Message-Authenticator =* 0x Sun Apr 14 16:56:24 2019 : Debug: (4) attr_filter.access_reject: Attribute "Message-Authenticator" allowed by 1 rules, disallowed by 0 rules Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: returned from attr_filter.access_reject (rlm_attr_filter) Sun Apr 14 16:56:24 2019 : Debug: (4) [attr_filter.access_reject] = updated Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: calling eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) eap: Reply already contained an EAP-Message, not inserting EAP-Failure Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: returned from eap (rlm_eap) Sun Apr 14 16:56:24 2019 : Debug: (4) [eap] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) policy remove_reply_message_if_eap { Sun Apr 14 16:56:24 2019 : Debug: (4) if (&reply:EAP-Message && &reply:Reply-Message) { Sun Apr 14 16:56:24 2019 : Debug: (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE Sun Apr 14 16:56:24 2019 : Debug: (4) else { Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: calling noop (rlm_always) Sun Apr 14 16:56:24 2019 : Debug: (4) modsingle[post-auth]: returned from noop (rlm_always) Sun Apr 14 16:56:24 2019 : Debug: (4) [noop] = noop Sun Apr 14 16:56:24 2019 : Debug: (4) } # else = noop Sun Apr 14 16:56:24 2019 : Debug: (4) } # policy remove_reply_message_if_eap = noop Sun Apr 14 16:56:24 2019 : Debug: (4) } # Post-Auth-Type REJECT = updated Sun Apr 14 16:56:24 2019 : Debug: (4) Delaying response for 1.000000 seconds Sun Apr 14 16:56:24 2019 : Debug: Waking up in 0.2 seconds. Sun Apr 14 16:56:24 2019 : Debug: Waking up in 0.7 seconds. Sun Apr 14 16:56:25 2019 : Debug: (4) Sending delayed response Sun Apr 14 16:56:25 2019 : Debug: (4) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:44837 length 44 Sun Apr 14 16:56:25 2019 : Debug: (4) EAP-Message = 0x04040004 Sun Apr 14 16:56:25 2019 : Debug: (4) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:25 2019 : Debug: Waking up in 3.5 seconds. Sun Apr 14 16:56:29 2019 : Debug: (0) Cleaning up request packet ID 0 with timestamp +26 Sun Apr 14 16:56:29 2019 : Debug: (1) Cleaning up request packet ID 1 with timestamp +26 Sun Apr 14 16:56:29 2019 : Debug: Waking up in 0.2 seconds. Sun Apr 14 16:56:29 2019 : Debug: (2) Cleaning up request packet ID 2 with timestamp +26 Sun Apr 14 16:56:29 2019 : Debug: (3) Cleaning up request packet ID 3 with timestamp +26 Sun Apr 14 16:56:29 2019 : Debug: (4) Cleaning up request packet ID 4 with timestamp +26 Sun Apr 14 16:56:29 2019 : Info: Ready to process requests Sun Apr 14 16:56:49 2019 : Debug: (5) Received Access-Request Id 0 from 127.0.0.1:42044 to 127.0.0.1:1812 length 132 Sun Apr 14 16:56:49 2019 : Debug: (5) User-Name = "anonymous" Sun Apr 14 16:56:49 2019 : Debug: (5) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:49 2019 : Debug: (5) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:49 2019 : Debug: (5) Framed-MTU = 1400 Sun Apr 14 16:56:49 2019 : Debug: (5) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:49 2019 : Debug: (5) Service-Type = Framed-User Sun Apr 14 16:56:49 2019 : Debug: (5) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:49 2019 : Debug: (5) EAP-Message = 0x0200000e01616e6f6e796d6f7573 Sun Apr 14 16:56:49 2019 : Debug: (5) Message-Authenticator = 0xcdb329fb62c058d3925ee90597ab4808 Sun Apr 14 16:56:49 2019 : Debug: (5) session-state: No State attribute Sun Apr 14 16:56:49 2019 : Debug: (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (5) authorize { Sun Apr 14 16:56:49 2019 : Debug: (5) policy filter_username { Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name) -> TRUE Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ / /) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (5) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (5) } # if (&User-Name) = notfound Sun Apr 14 16:56:49 2019 : Debug: (5) } # policy filter_username = notfound Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (5) [preprocess] = ok Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (5) [chap] = noop Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (5) [mschap] = noop Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (5) [digest] = noop Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (5) suffix: Checking for suffix after "@" Sun Apr 14 16:56:49 2019 : Debug: (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:49 2019 : Debug: (5) suffix: No such realm "NULL" Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (5) [suffix] = noop Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (5) eap: Peer sent EAP Response (code 2) ID 0 length 14 Sun Apr 14 16:56:49 2019 : Debug: (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (5) [eap] = ok Sun Apr 14 16:56:49 2019 : Debug: (5) } # authorize = ok Sun Apr 14 16:56:49 2019 : Debug: (5) Found Auth-Type = eap Sun Apr 14 16:56:49 2019 : Debug: (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (5) authenticate { Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (5) eap: Peer sent packet with method EAP Identity (1) Sun Apr 14 16:56:49 2019 : Debug: (5) eap: Calling submodule eap_peap to process data Sun Apr 14 16:56:49 2019 : Debug: (5) eap_peap: Initiating new EAP-TLS session Sun Apr 14 16:56:49 2019 : Debug: (5) eap_peap: [eaptls start] = request Sun Apr 14 16:56:49 2019 : Debug: (5) eap: Sending EAP Request (code 1) ID 1 length 6 Sun Apr 14 16:56:49 2019 : Debug: (5) eap: EAP session adding &reply:State = 0xe81868d9e819712b Sun Apr 14 16:56:49 2019 : Debug: (5) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (5) [eap] = handled Sun Apr 14 16:56:49 2019 : Debug: (5) } # authenticate = handled Sun Apr 14 16:56:49 2019 : Debug: (5) Using Post-Auth-Type Challenge Sun Apr 14 16:56:49 2019 : Debug: (5) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:49 2019 : Debug: (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (5) session-state: Nothing to cache Sun Apr 14 16:56:49 2019 : Debug: (5) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:42044 length 0 Sun Apr 14 16:56:49 2019 : Debug: (5) EAP-Message = 0x010100061920 Sun Apr 14 16:56:49 2019 : Debug: (5) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:49 2019 : Debug: (5) State = 0xe81868d9e819712b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (5) Finished request Sun Apr 14 16:56:49 2019 : Debug: Waking up in 4.9 seconds. Sun Apr 14 16:56:49 2019 : Debug: (6) Received Access-Request Id 1 from 127.0.0.1:42044 to 127.0.0.1:1812 length 142 Sun Apr 14 16:56:49 2019 : Debug: (6) User-Name = "anonymous" Sun Apr 14 16:56:49 2019 : Debug: (6) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:49 2019 : Debug: (6) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:49 2019 : Debug: (6) Framed-MTU = 1400 Sun Apr 14 16:56:49 2019 : Debug: (6) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:49 2019 : Debug: (6) Service-Type = Framed-User Sun Apr 14 16:56:49 2019 : Debug: (6) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:49 2019 : Debug: (6) EAP-Message = 0x020100060315 Sun Apr 14 16:56:49 2019 : Debug: (6) State = 0xe81868d9e819712b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (6) Message-Authenticator = 0x808aa1a913dc01d6a2705cd81b8a753e Sun Apr 14 16:56:49 2019 : Debug: (6) session-state: No cached attributes Sun Apr 14 16:56:49 2019 : Debug: (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (6) authorize { Sun Apr 14 16:56:49 2019 : Debug: (6) policy filter_username { Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name) -> TRUE Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ / /) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (6) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (6) } # if (&User-Name) = notfound Sun Apr 14 16:56:49 2019 : Debug: (6) } # policy filter_username = notfound Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (6) [preprocess] = ok Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (6) [chap] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (6) [mschap] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (6) [digest] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (6) suffix: Checking for suffix after "@" Sun Apr 14 16:56:49 2019 : Debug: (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:49 2019 : Debug: (6) suffix: No such realm "NULL" Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (6) [suffix] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Peer sent EAP Response (code 2) ID 1 length 6 Sun Apr 14 16:56:49 2019 : Debug: (6) eap: No EAP Start, assuming it's an on-going EAP conversation Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (6) [eap] = updated Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling files (rlm_files) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from files (rlm_files) Sun Apr 14 16:56:49 2019 : Debug: (6) [files] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling expiration (rlm_expiration) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from expiration (rlm_expiration) Sun Apr 14 16:56:49 2019 : Debug: (6) [expiration] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling logintime (rlm_logintime) Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from logintime (rlm_logintime) Sun Apr 14 16:56:49 2019 : Debug: (6) [logintime] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: calling pap (rlm_pap) Sun Apr 14 16:56:49 2019 : WARNING: (6) pap: No "known good" password found for the user. Not setting Auth-Type Sun Apr 14 16:56:49 2019 : WARNING: (6) pap: Authentication will fail unless a "known good" password is available Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authorize]: returned from pap (rlm_pap) Sun Apr 14 16:56:49 2019 : Debug: (6) [pap] = noop Sun Apr 14 16:56:49 2019 : Debug: (6) } # authorize = updated Sun Apr 14 16:56:49 2019 : Debug: (6) Found Auth-Type = eap Sun Apr 14 16:56:49 2019 : Debug: (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (6) authenticate { Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Expiring EAP session with state 0xe81868d9e819712b Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Finished EAP session with state 0xe81868d9e819712b Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Previous EAP request found for state 0xe81868d9e819712b, released from the list Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Peer sent packet with method EAP NAK (3) Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Found mutually acceptable type TTLS (21) Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:49 2019 : Debug: (6) eap_ttls: Initiating new EAP-TLS session Sun Apr 14 16:56:49 2019 : Debug: (6) eap_ttls: [eaptls start] = request Sun Apr 14 16:56:49 2019 : Debug: (6) eap: Sending EAP Request (code 1) ID 2 length 6 Sun Apr 14 16:56:49 2019 : Debug: (6) eap: EAP session adding &reply:State = 0xe81868d9e91a7d2b Sun Apr 14 16:56:49 2019 : Debug: (6) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (6) [eap] = handled Sun Apr 14 16:56:49 2019 : Debug: (6) } # authenticate = handled Sun Apr 14 16:56:49 2019 : Debug: (6) Using Post-Auth-Type Challenge Sun Apr 14 16:56:49 2019 : Debug: (6) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:49 2019 : Debug: (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (6) session-state: Nothing to cache Sun Apr 14 16:56:49 2019 : Debug: (6) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:42044 length 0 Sun Apr 14 16:56:49 2019 : Debug: (6) EAP-Message = 0x010200061520 Sun Apr 14 16:56:49 2019 : Debug: (6) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:49 2019 : Debug: (6) State = 0xe81868d9e91a7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (6) Finished request Sun Apr 14 16:56:49 2019 : Debug: Waking up in 4.9 seconds. Sun Apr 14 16:56:49 2019 : Debug: (7) Received Access-Request Id 2 from 127.0.0.1:42044 to 127.0.0.1:1812 length 314 Sun Apr 14 16:56:49 2019 : Debug: (7) User-Name = "anonymous" Sun Apr 14 16:56:49 2019 : Debug: (7) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:49 2019 : Debug: (7) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:49 2019 : Debug: (7) Framed-MTU = 1400 Sun Apr 14 16:56:49 2019 : Debug: (7) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:49 2019 : Debug: (7) Service-Type = Framed-User Sun Apr 14 16:56:49 2019 : Debug: (7) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:49 2019 : Debug: (7) EAP-Message = 0x020200b2150016030100a7010000a303031fa43708c095a0c74d0cd10ac0f0d390b044376c 3a992d1ebd02f015527f953f000038c02cc030009fcca9cca8ccaac02bc02f009ec024c02800 6bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff0100004200 0b0004030001 Sun Apr 14 16:56:49 2019 : Debug: (7) State = 0xe81868d9e91a7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (7) Message-Authenticator = 0x46eaa1291c9699ddcd59030ed4de9c1c Sun Apr 14 16:56:49 2019 : Debug: (7) session-state: No cached attributes Sun Apr 14 16:56:49 2019 : Debug: (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (7) authorize { Sun Apr 14 16:56:49 2019 : Debug: (7) policy filter_username { Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name) -> TRUE Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ / /) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (7) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (7) } # if (&User-Name) = notfound Sun Apr 14 16:56:49 2019 : Debug: (7) } # policy filter_username = notfound Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (7) [preprocess] = ok Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (7) [chap] = noop Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (7) [mschap] = noop Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (7) [digest] = noop Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (7) suffix: Checking for suffix after "@" Sun Apr 14 16:56:49 2019 : Debug: (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:49 2019 : Debug: (7) suffix: No such realm "NULL" Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (7) [suffix] = noop Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Peer sent EAP Response (code 2) ID 2 length 178 Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Continuing tunnel setup Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (7) [eap] = ok Sun Apr 14 16:56:49 2019 : Debug: (7) } # authorize = ok Sun Apr 14 16:56:49 2019 : Debug: (7) Found Auth-Type = eap Sun Apr 14 16:56:49 2019 : Debug: (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (7) authenticate { Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Expiring EAP session with state 0xe81868d9e91a7d2b Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Finished EAP session with state 0xe81868d9e91a7d2b Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Previous EAP request found for state 0xe81868d9e91a7d2b, released from the list Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: Authenticate Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: [eaptls verify] = ok Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: Done initial handshake Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: (other): before SSL initialization Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: before SSL initialization Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: before SSL initialization Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: <<< recv TLS 1.2 [length 00a7] Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: SSLv3/TLS read client hello Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: >>> send TLS 1.2 [length 003d] Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: SSLv3/TLS write server hello Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: >>> send TLS 1.2 [length 02d9] Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: SSLv3/TLS write certificate Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: >>> send TLS 1.2 [length 014d] Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: SSLv3/TLS write key exchange Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: >>> send TLS 1.2 [length 0004] Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: In SSL Handshake Phase Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: In SSL Accept mode Sun Apr 14 16:56:49 2019 : Debug: (7) eap_ttls: [eaptls process] = handled Sun Apr 14 16:56:49 2019 : Debug: (7) eap: Sending EAP Request (code 1) ID 3 length 1004 Sun Apr 14 16:56:49 2019 : Debug: (7) eap: EAP session adding &reply:State = 0xe81868d9ea1b7d2b Sun Apr 14 16:56:49 2019 : Debug: (7) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (7) [eap] = handled Sun Apr 14 16:56:49 2019 : Debug: (7) } # authenticate = handled Sun Apr 14 16:56:49 2019 : Debug: (7) Using Post-Auth-Type Challenge Sun Apr 14 16:56:49 2019 : Debug: (7) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:49 2019 : Debug: (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (7) session-state: Nothing to cache Sun Apr 14 16:56:49 2019 : Debug: (7) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:42044 length 0 Sun Apr 14 16:56:49 2019 : Debug: (7) EAP-Message = 0x010303ec15c00000047b160303003d020000390303e5b005f35c1056db800f2287607e956b 7b46fa104408e31d7209245316f4fa7600c030000011ff01000100000b000403000102001700 0016030302d90b0002d50002d20002cf308202cb308201b3a003020102020900a1ccb3d7090c ca2e300d0609 Sun Apr 14 16:56:49 2019 : Debug: (7) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:49 2019 : Debug: (7) State = 0xe81868d9ea1b7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (7) Finished request Sun Apr 14 16:56:49 2019 : Debug: Waking up in 4.7 seconds. Sun Apr 14 16:56:49 2019 : Debug: (8) Received Access-Request Id 3 from 127.0.0.1:42044 to 127.0.0.1:1812 length 142 Sun Apr 14 16:56:49 2019 : Debug: (8) User-Name = "anonymous" Sun Apr 14 16:56:49 2019 : Debug: (8) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:49 2019 : Debug: (8) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:49 2019 : Debug: (8) Framed-MTU = 1400 Sun Apr 14 16:56:49 2019 : Debug: (8) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:49 2019 : Debug: (8) Service-Type = Framed-User Sun Apr 14 16:56:49 2019 : Debug: (8) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:49 2019 : Debug: (8) EAP-Message = 0x020300061500 Sun Apr 14 16:56:49 2019 : Debug: (8) State = 0xe81868d9ea1b7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (8) Message-Authenticator = 0xc4ca5aa177111ff87d36d8b714339d25 Sun Apr 14 16:56:49 2019 : Debug: (8) session-state: No cached attributes Sun Apr 14 16:56:49 2019 : Debug: (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (8) authorize { Sun Apr 14 16:56:49 2019 : Debug: (8) policy filter_username { Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name) -> TRUE Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ / /) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (8) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (8) } # if (&User-Name) = notfound Sun Apr 14 16:56:49 2019 : Debug: (8) } # policy filter_username = notfound Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (8) [preprocess] = ok Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (8) [chap] = noop Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (8) [mschap] = noop Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (8) [digest] = noop Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (8) suffix: Checking for suffix after "@" Sun Apr 14 16:56:49 2019 : Debug: (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:49 2019 : Debug: (8) suffix: No such realm "NULL" Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (8) [suffix] = noop Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Peer sent EAP Response (code 2) ID 3 length 6 Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Continuing tunnel setup Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (8) [eap] = ok Sun Apr 14 16:56:49 2019 : Debug: (8) } # authorize = ok Sun Apr 14 16:56:49 2019 : Debug: (8) Found Auth-Type = eap Sun Apr 14 16:56:49 2019 : Debug: (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (8) authenticate { Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Expiring EAP session with state 0xe81868d9ea1b7d2b Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Finished EAP session with state 0xe81868d9ea1b7d2b Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Previous EAP request found for state 0xe81868d9ea1b7d2b, released from the list Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: Authenticate Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: Peer ACKed our handshake fragment Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: [eaptls verify] = request Sun Apr 14 16:56:49 2019 : Debug: (8) eap_ttls: [eaptls process] = handled Sun Apr 14 16:56:49 2019 : Debug: (8) eap: Sending EAP Request (code 1) ID 4 length 163 Sun Apr 14 16:56:49 2019 : Debug: (8) eap: EAP session adding &reply:State = 0xe81868d9eb1c7d2b Sun Apr 14 16:56:49 2019 : Debug: (8) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (8) [eap] = handled Sun Apr 14 16:56:49 2019 : Debug: (8) } # authenticate = handled Sun Apr 14 16:56:49 2019 : Debug: (8) Using Post-Auth-Type Challenge Sun Apr 14 16:56:49 2019 : Debug: (8) Post-Auth-Type sub-section not found. Ignoring. Sun Apr 14 16:56:49 2019 : Debug: (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (8) session-state: Nothing to cache Sun Apr 14 16:56:49 2019 : Debug: (8) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:42044 length 0 Sun Apr 14 16:56:49 2019 : Debug: (8) EAP-Message = 0x010400a315800000047ba809e330cce24ab88bfab17ed9c00e48dcebb6fcd2982c474cb7d0 454c051a57fed52cc06d3916f93931d3c14581ca07ba095ba3e07b033aeb3916c60c7d277c83 2839e4c2bda77fd00518ab3edb3662c6de6389cfed4f6bce93661d261beee419db6f2cffffd9 efa9f95dfb6d Sun Apr 14 16:56:49 2019 : Debug: (8) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:49 2019 : Debug: (8) State = 0xe81868d9eb1c7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (8) Finished request Sun Apr 14 16:56:49 2019 : Debug: Waking up in 4.6 seconds. Sun Apr 14 16:56:49 2019 : Debug: (9) Received Access-Request Id 4 from 127.0.0.1:42044 to 127.0.0.1:1812 length 149 Sun Apr 14 16:56:49 2019 : Debug: (9) User-Name = "anonymous" Sun Apr 14 16:56:49 2019 : Debug: (9) NAS-IP-Address = 127.0.0.1 Sun Apr 14 16:56:49 2019 : Debug: (9) Calling-Station-Id = "02-00-00-00-00-01" Sun Apr 14 16:56:49 2019 : Debug: (9) Framed-MTU = 1400 Sun Apr 14 16:56:49 2019 : Debug: (9) NAS-Port-Type = Wireless-802.11 Sun Apr 14 16:56:49 2019 : Debug: (9) Service-Type = Framed-User Sun Apr 14 16:56:49 2019 : Debug: (9) Connect-Info = "CONNECT 11Mbps 802.11b" Sun Apr 14 16:56:49 2019 : Debug: (9) EAP-Message = 0x0204000d150015030300020230 Sun Apr 14 16:56:49 2019 : Debug: (9) State = 0xe81868d9eb1c7d2b5e54bfdf71bdf4da Sun Apr 14 16:56:49 2019 : Debug: (9) Message-Authenticator = 0xd4e643b2e8e294a3e165f6f39b912ff4 Sun Apr 14 16:56:49 2019 : Debug: (9) session-state: No cached attributes Sun Apr 14 16:56:49 2019 : Debug: (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (9) authorize { Sun Apr 14 16:56:49 2019 : Debug: (9) policy filter_username { Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name) -> TRUE Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name) { Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ / /) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ / /) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /@[^@]*@/ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /\.\./ ) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /\.\./ ) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /\.$/) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /\.$/) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /@\./) { Sun Apr 14 16:56:49 2019 : Debug: No matches Sun Apr 14 16:56:49 2019 : Debug: (9) if (&User-Name =~ /@\./) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) } # if (&User-Name) = notfound Sun Apr 14 16:56:49 2019 : Debug: (9) } # policy filter_username = notfound Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from preprocess (rlm_preprocess) Sun Apr 14 16:56:49 2019 : Debug: (9) [preprocess] = ok Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from chap (rlm_chap) Sun Apr 14 16:56:49 2019 : Debug: (9) [chap] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from mschap (rlm_mschap) Sun Apr 14 16:56:49 2019 : Debug: (9) [mschap] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from digest (rlm_digest) Sun Apr 14 16:56:49 2019 : Debug: (9) [digest] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (9) suffix: Checking for suffix after "@" Sun Apr 14 16:56:49 2019 : Debug: (9) suffix: No '@' in User-Name = "anonymous", looking up realm NULL Sun Apr 14 16:56:49 2019 : Debug: (9) suffix: No such realm "NULL" Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from suffix (rlm_realm) Sun Apr 14 16:56:49 2019 : Debug: (9) [suffix] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Peer sent EAP Response (code 2) ID 4 length 13 Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Continuing tunnel setup Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authorize]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) [eap] = ok Sun Apr 14 16:56:49 2019 : Debug: (9) } # authorize = ok Sun Apr 14 16:56:49 2019 : Debug: (9) Found Auth-Type = eap Sun Apr 14 16:56:49 2019 : Debug: (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (9) authenticate { Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authenticate]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Expiring EAP session with state 0xe81868d9eb1c7d2b Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Finished EAP session with state 0xe81868d9eb1c7d2b Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Previous EAP request found for state 0xe81868d9eb1c7d2b, released from the list Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Peer sent packet with method EAP TTLS (21) Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Calling submodule eap_ttls to process data Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: Authenticate Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: Continuing EAP-TLS Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: Peer sent flags --- Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: [eaptls verify] = ok Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: Done initial handshake Sun Apr 14 16:56:49 2019 : Debug: Ignoring cbtls_msg call with pseudo content type 256, version 0 Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: <<< recv TLS 1.2 [length 0002] Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Sending EAP Failure (code 4) ID 4 length 4 Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Failed in EAP select Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[authenticate]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) [eap] = invalid Sun Apr 14 16:56:49 2019 : Debug: (9) } # authenticate = invalid Sun Apr 14 16:56:49 2019 : Debug: (9) Failed to authenticate the user Sun Apr 14 16:56:49 2019 : Debug: (9) Using Post-Auth-Type Reject Sun Apr 14 16:56:49 2019 : Debug: (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Sun Apr 14 16:56:49 2019 : Debug: (9) Post-Auth-Type REJECT { Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: calling attr_filter.access_reject (rlm_attr_filter) Sun Apr 14 16:56:49 2019 : Debug: %{User-Name} Sun Apr 14 16:56:49 2019 : Debug: Parsed xlat tree: Sun Apr 14 16:56:49 2019 : Debug: attribute --> User-Name Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: EXPAND %{User-Name} Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: --> anonymous Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: EAP-Message = 0x04040004 allowed by EAP-Message =* 0x Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: Attribute "EAP-Message" allowed by 1 rules, disallowed by 0 rules Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: Message-Authenticator = 0x00000000000000000000000000000000 allowed by Message-Authenticator =* 0x Sun Apr 14 16:56:49 2019 : Debug: (9) attr_filter.access_reject: Attribute "Message-Authenticator" allowed by 1 rules, disallowed by 0 rules Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: returned from attr_filter.access_reject (rlm_attr_filter) Sun Apr 14 16:56:49 2019 : Debug: (9) [attr_filter.access_reject] = updated Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: calling eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) eap: Reply already contained an EAP-Message, not inserting EAP-Failure Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: returned from eap (rlm_eap) Sun Apr 14 16:56:49 2019 : Debug: (9) [eap] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) policy remove_reply_message_if_eap { Sun Apr 14 16:56:49 2019 : Debug: (9) if (&reply:EAP-Message && &reply:Reply-Message) { Sun Apr 14 16:56:49 2019 : Debug: (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE Sun Apr 14 16:56:49 2019 : Debug: (9) else { Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: calling noop (rlm_always) Sun Apr 14 16:56:49 2019 : Debug: (9) modsingle[post-auth]: returned from noop (rlm_always) Sun Apr 14 16:56:49 2019 : Debug: (9) [noop] = noop Sun Apr 14 16:56:49 2019 : Debug: (9) } # else = noop Sun Apr 14 16:56:49 2019 : Debug: (9) } # policy remove_reply_message_if_eap = noop Sun Apr 14 16:56:49 2019 : Debug: (9) } # Post-Auth-Type REJECT = updated Sun Apr 14 16:56:49 2019 : Debug: (9) Delaying response for 1.000000 seconds Sun Apr 14 16:56:49 2019 : Debug: Waking up in 0.2 seconds. Sun Apr 14 16:56:50 2019 : Debug: Waking up in 0.7 seconds. Sun Apr 14 16:56:50 2019 : Debug: (9) Sending delayed response Sun Apr 14 16:56:50 2019 : Debug: (9) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:42044 length 44 Sun Apr 14 16:56:50 2019 : Debug: (9) EAP-Message = 0x04040004 Sun Apr 14 16:56:50 2019 : Debug: (9) Message-Authenticator = 0x00000000000000000000000000000000 Sun Apr 14 16:56:50 2019 : Debug: Waking up in 3.5 seconds. Sun Apr 14 16:56:54 2019 : Debug: (5) Cleaning up request packet ID 0 with timestamp +51 Sun Apr 14 16:56:54 2019 : Debug: (6) Cleaning up request packet ID 1 with timestamp +51 Sun Apr 14 16:56:54 2019 : Debug: Waking up in 0.2 seconds. Sun Apr 14 16:56:54 2019 : Debug: (7) Cleaning up request packet ID 2 with timestamp +51 Sun Apr 14 16:56:54 2019 : Debug: (8) Cleaning up request packet ID 3 with timestamp +51 Sun Apr 14 16:56:54 2019 : Debug: (9) Cleaning up request packet ID 4 with timestamp +51 Sun Apr 14 16:56:54 2019 : Info: Ready to process requests
On Apr 14, 2019, at 7:18 PM, rbbhill@gmail.com wrote:
Hi all, thanks for your help in advance. I have spent the last week trying to solve this issue, I have read and read all information I can find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl. For the freeradius I have followed the guides by each detail in full, the only exception is replacing etc/raddb with etc/freeradius/3.0. The freeradius server is set up and running and I have completed testing with local host using radtest and eapol. Test results:
OK.
PAP Localhost = Ok, passes - used radtest bob hello localhost 0 testing123
EAP (using EAPOL) PEAPv0_EAP-MSCHAPv2 = Ok, Passes EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes
That's good.
Good so far, next I edit EAPOL test scripts to uncomment so as to use the test certs for testing. The only thing I changed here was /etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to point test utility to the correct directory.
Sure.
EAP (using EAPOL with cert check uncommented) PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
That means you haven't told eapol_test what the CA cert is. The eapol_test configuration file *should* point to the correct CA file. If that's done, then the "unknown CA" error should go away.
I followed deployingradius, and used make to build certs, they are all populated in the directory, but tests repeatedly fail. This same error comes up repeatedly across peap and ttls using cert:
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
That's eapol_test telling FreeRADIUS that eapol_test doesn't like the CA cert being presented by FreeRADIUS. If this authentication isn't with eapol_test, then the same comment applies. Configure the supplicant to know about the CA cert used by FreeRADIUS.
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed
I am very new to radius, and I am trying to setup the server to test with some headless devices, and they need to be able to support PEAP, TLS, and TTLS with certs. I went as far as setting a completely identical server on another Pi and tried with production certificates, with same error. The only thing I notice different is that when I access the network with my iphone, the public cert it sends my iphone is completely different than any of the certs in /etc/freeradius/3.0/certs/.
Then the server isn't using /etc/freeradius/3.0/certs/, is it? READ the debug output. ALL OF IT. It will print out what files it's reading, including which certificates it's reading. Those are the certificates you need to use.
Verbose log: Sun Apr 14 16:55:58 2019 : Info: Ready to process requests
PLEASE read the documentation on what to post to the list. When you join the list, you get an email message telling to read the documentation. It includes a URL. PLEASE read it. http://wiki.freeradius.org/list-help Alan DeKok.
Thanks for your help Alan, I am not using a standalone supplicant, other than the wpa_supplicant utility on the Pi with freeradius. The eapol_test configuration is pointing to the freeradius ca.der per the following configuration. As you pointed out in the previous email, the server isn't using /etc/freeradius/3.0/certs/, it is getting the ca from somewhere else. I have listed the debug output below, but I am still unable to determine the directory being called for ca presentation. # # eapol_test -c ttls-eap-mschapv2.conf -s testing123 # network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS identity="bob" anonymous_identity="anonymous" password="hello" phase2="autheap=MSCHAPV2" # # Uncomment the following to perform server certificate validation. ca_cert="/etc/freeradius/3.0/certs/ca.der" } --Debug-- FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client ubiquiti { ipaddr = 192.168.2.8 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_radutmp } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 39598 Listening on proxy address :: port 32944 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:35583 to 127.0.0.1:1812 length 132 (0) User-Name = "anonymous" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0xe91a0a4211375b1ec592ef82043b6839 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0xa1b0858aa1b19c09 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (0) EAP-Message = 0x010100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa1b0858aa1b19c0998614206367371a6 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:35583 to 127.0.0.1:1812 length 318 (1) User-Name = "anonymous" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020100b61980000000ac16030100a7010000a30303860bf8a8872d1814268455ce17a2a87e0d798884edef35eb0ee04b06fe9b8e20000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c02$ (1) State = 0xa1b0858aa1b19c0998614206367371a6 (1) Message-Authenticator = 0x90b9549c1e19de3cc3f127394790a5fc (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 182 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xa1b0858aa1b19c09 (1) eap: Finished EAP session with state 0xa1b0858aa1b19c09 (1) eap: Previous EAP request found for state 0xa1b0858aa1b19c09, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 172 bytes (1) eap_peap: Got complete TLS record (172 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv TLS 1.2 [length 00a7] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 02d9] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1004 (1) eap: EAP session adding &reply:State = 0xa1b0858aa0b29c09 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (1) EAP-Message = 0x010203ec19c00000047b160303003d0200003903032c3dd45b424431005f4380406ed090071978ceaa63a168b4b345da59a69bd69800c030000011ff01000100000b0004030001020017000016030302d90b000$ (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa1b0858aa0b29c0998614206367371a6 (1) Finished request Waking up in 4.4 seconds. (1) Finished request Waking up in 4.4 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:35583 to 127.0.0.1:1812 length 142 (2) User-Name = "anonymous" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200061900 (2) State = 0xa1b0858aa0b29c0998614206367371a6 (2) Message-Authenticator = 0x14d43f9302cd8700a726df43ba10eb6d (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa1b0858aa0b29c09 (2) eap: Finished EAP session with state 0xa1b0858aa0b29c09 (2) eap: Previous EAP request found for state 0xa1b0858aa0b29c09, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 159 (2) eap: EAP session adding &reply:State = 0xa1b0858aa3b39c09 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (2) EAP-Message = 0x0103009f1900288cc33aa919f74cbdfb1fadaf8ac3a901f95d86cbe5fb4bb4d84cac8f3a8b60a3e5dabcf82c5079577efa11938f12a720ffea242b9b235c775df675f2adbefe2e8796a8d0fd1a95fe76e923790$ (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa1b0858aa3b39c0998614206367371a6 (2) Finished request Waking up in 4.4 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:35583 to 127.0.0.1:1812 length 153 (3) User-Name = "anonymous" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x0203001119800000000715030300020230 (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x0203001119800000000715030300020230 (3) State = 0xa1b0858aa3b39c0998614206367371a6 (3) Message-Authenticator = 0xa20feef604022ea0d15e1afbf4edf672 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 17 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09 (3) authenticate { (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09 (3) eap: Finished EAP session with state 0xa1b0858aa3b39c09 (3) eap: Previous EAP request found for state 0xa1b0858aa3b39c09, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 7 bytes (3) eap_peap: Got complete TLS record (7 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: <<< recv TLS 1.2 [length 0002] (3) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (3) eap_peap: ERROR: System call (I/O) error (-1) (3) eap_peap: ERROR: TLS receive handshake failed during operation (3) eap_peap: ERROR: [eaptls process] = fail (3) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (3) eap: Sending EAP Failure (code 4) ID 3 length 4 (3) eap: Failed in EAP select (3) [eap] = invalid (3) } # authenticate = invalid (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> anonymous (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 3 from 127.0.0.1:1812 to 127.0.0.1:35583 length 44 (3) EAP-Message = 0x04030004 (3) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.3 seconds. (0) Cleaning up request packet ID 0 with timestamp +13 Waking up in 0.4 seconds. (1) Cleaning up request packet ID 1 with timestamp +13 (2) Cleaning up request packet ID 2 with timestamp +14 (3) Cleaning up request packet ID 3 with timestamp +14 Ready to process requests (4) Received Access-Request Id 0 from 127.0.0.1:53791 to 127.0.0.1:1812 length 132 (4) User-Name = "anonymous" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (4) Message-Authenticator = 0x74f485700ace38d3a912177314edd716 (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 14 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Initiating new EAP-TLS session (4) eap_peap: [eaptls start] = request (4) eap: Sending EAP Request (code 1) ID 1 length 6 (4) eap: EAP session adding &reply:State = 0x7cb2fc507cb3e55b (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (4) EAP-Message = 0x010100061920 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x7cb2fc507cb3e55b86cd612645cba906 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 1 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142 (5) User-Name = "anonymous" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020100060315 (5) State = 0x7cb2fc507cb3e55b86cd612645cba906 (5) Message-Authenticator = 0xad804965169d36f2bb3fbe585f3220a4 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) [files] = noop (5) [expiration] = noop (5) [logintime] = noop (5) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (5) pap: WARNING: Authentication will fail unless a "known good" password is available (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x7cb2fc507cb3e55b (5) eap: Finished EAP session with state 0x7cb2fc507cb3e55b (5) eap: Previous EAP request found for state 0x7cb2fc507cb3e55b, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Found mutually acceptable type TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Initiating new EAP-TLS session (5) eap_ttls: [eaptls start] = request (5) eap: Sending EAP Request (code 1) ID 2 length 6 (5) eap: EAP session adding &reply:State = 0x7cb2fc507db0e95b (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (5) EAP-Message = 0x010200061520 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7cb2fc507db0e95b86cd612645cba906 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 2 from 127.0.0.1:53791 to 127.0.0.1:1812 length 314 (6) User-Name = "anonymous" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x020200b2150016030100a7010000a30303e51f51535de3983944d2582d0174d45753f0a856d58bf732c0992d00fd150a29000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00$ (6) State = 0x7cb2fc507db0e95b86cd612645cba906 (6) Message-Authenticator = 0x909d8709bdfa74503ee132f431a8b8f0 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 2 length 178 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x7cb2fc507db0e95b (6) eap: Finished EAP session with state 0x7cb2fc507db0e95b (6) eap: Previous EAP request found for state 0x7cb2fc507db0e95b, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: [eaptls verify] = ok (6) eap_ttls: Done initial handshake (6) eap_ttls: (other): before SSL initialization (6) eap_ttls: TLS_accept: before SSL initialization (6) eap_ttls: TLS_accept: before SSL initialization (6) eap_ttls: <<< recv TLS 1.2 [length 00a7] (6) eap_ttls: TLS_accept: SSLv3/TLS read client hello (6) eap_ttls: >>> send TLS 1.2 [length 003d] (6) eap_ttls: TLS_accept: SSLv3/TLS write server hello (6) eap_ttls: >>> send TLS 1.2 [length 02d9] (6) eap_ttls: TLS_accept: SSLv3/TLS write certificate (6) eap_ttls: >>> send TLS 1.2 [length 014d] (6) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (6) eap_ttls: >>> send TLS 1.2 [length 0004] (6) eap_ttls: TLS_accept: SSLv3/TLS write server done (6) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (6) eap_ttls: In SSL Handshake Phase (6) eap_ttls: In SSL Accept mode (6) eap_ttls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 3 length 1004 (6) eap: EAP session adding &reply:State = 0x7cb2fc507eb1e95b (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (6) EAP-Message = 0x010303ec15c00000047b160303003d020000390303a48ec3291ffdad331434cd1f53656a17297fa14fa438832d137d7062f380961a00c030000011ff01000100000b0004030001020017000016030302d90b000$ (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7cb2fc507eb1e95b86cd612645cba906 (6) Finished request Waking up in 4.5 seconds. (6) Finished request Waking up in 4.5 seconds. (7) Received Access-Request Id 3 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142 (7) User-Name = "anonymous" (7) NAS-IP-Address = 127.0.0.1 (7) Calling-Station-Id = "02-00-00-00-00-01" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x020300061500 (7) State = 0x7cb2fc507eb1e95b86cd612645cba906 (7) Message-Authenticator = 0xf57e52dc860514e1764acd8786783de4 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" ((7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 3 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x7cb2fc507eb1e95b (7) eap: Finished EAP session with state 0x7cb2fc507eb1e95b (7) eap: Previous EAP request found for state 0x7cb2fc507eb1e95b, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: Continuing EAP-TLS (7) eap_ttls: Peer ACKed our handshake fragment (7) eap_ttls: [eaptls verify] = request (7) eap_ttls: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 4 length 163 (7) eap: EAP session adding &reply:State = 0x7cb2fc507fb6e95b (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (7) EAP-Message = 0x010400a315800000047bd69a449daa4cab88a2395250ee31e2f61df036299c8d214844e9a4262a33f7dc86ee88f1cd5798105e54d219748d7ec63624ddfb4c8c3aa0cafead3bc956443ddcc15681270e33f8b2f$ (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x7cb2fc507fb6e95b86cd612645cba906 (7) Finished request Waking up in 4.4 seconds. (8) Received Access-Request Id 4 from 127.0.0.1:53791 to 127.0.0.1:1812 length 149 (8) User-Name = "anonymous" (8) NAS-IP-Address = 127.0.0.1 (8) Calling-Station-Id = "02-00-00-00-00-01" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) EAP-Message = 0x0204000d150015030300020230 (8) State = 0x7cb2fc507fb6e95b86cd612645cba906 (8) Message-Authenticator = 0xda8bbc41c56e142e1af7d9e1eb13d763 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 4 length 13 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x7cb2fc507fb6e95b (8) eap: Finished EAP session with state 0x7cb2fc507fb6e95b (8) eap: Previous EAP request found for state 0x7cb2fc507fb6e95b, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: Continuing EAP-TLS (8) eap_ttls: [eaptls verify] = ok (8) eap_ttls: Done initial handshake (8) eap_ttls: <<< recv TLS 1.2 [length 0002] (8) eap_ttls: ERROR: TLS Alert read:fatal:unknown CA (8) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (8) eap_ttls: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (8) eap_ttls: ERROR: System call (I/O) error (-1) (8) eap_ttls: ERROR: TLS receive handshake failed during operation (8) eap_ttls: ERROR: [eaptls process] = fail (8) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 4 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> anonymous (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:53791 length 44 (8) EAP-Message = 0x04040004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.3 seconds. (4) Cleaning up request packet ID 0 with timestamp +37 (5) Cleaning up request packet ID 1 with timestamp +37 Waking up in 0.3 seconds. (6) Cleaning up request packet ID 2 with timestamp +38 (7) Cleaning up request packet ID 3 with timestamp +38 Waking up in 0.1 seconds. (8) Cleaning up request packet ID 4 with timestamp +38 Ready to process requests -----Original Message----- From: Freeradius-Users <freeradius-users-bounces+rbbhill=gmail.com@lists.freeradius.org> On Behalf Of Alan DeKok Sent: Sunday, April 14, 2019 6:35 PM To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: Freeradius - eapol testing failure On Apr 14, 2019, at 7:18 PM, rbbhill@gmail.com wrote:
Hi all, thanks for your help in advance. I have spent the last week trying to solve this issue, I have read and read all information I can find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl. For the freeradius I have followed the guides by each detail in full, the only exception is replacing etc/raddb with etc/freeradius/3.0. The freeradius server is set up and running and I have completed testing with local host using radtest and eapol. Test results:
OK.
PAP Localhost = Ok, passes - used radtest bob hello localhost 0 testing123
EAP (using EAPOL) PEAPv0_EAP-MSCHAPv2 = Ok, Passes EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes
That's good.
Good so far, next I edit EAPOL test scripts to uncomment so as to use the test certs for testing. The only thing I changed here was /etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to point test utility to the correct directory.
Sure.
EAP (using EAPOL with cert check uncommented) PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
That means you haven't told eapol_test what the CA cert is. The eapol_test configuration file *should* point to the correct CA file. If that's done, then the "unknown CA" error should go away.
I followed deployingradius, and used make to build certs, they are all populated in the directory, but tests repeatedly fail. This same error comes up repeatedly across peap and ttls using cert:
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
That's eapol_test telling FreeRADIUS that eapol_test doesn't like the CA cert being presented by FreeRADIUS. If this authentication isn't with eapol_test, then the same comment applies. Configure the supplicant to know about the CA cert used by FreeRADIUS.
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed
I am very new to radius, and I am trying to setup the server to test with some headless devices, and they need to be able to support PEAP, TLS, and TTLS with certs. I went as far as setting a completely identical server on another Pi and tried with production certificates, with same error. The only thing I notice different is that when I access the network with my iphone, the public cert it sends my iphone is completely different than any of the certs in /etc/freeradius/3.0/certs/.
Then the server isn't using /etc/freeradius/3.0/certs/, is it? READ the debug output. ALL OF IT. It will print out what files it's reading, including which certificates it's reading. Those are the certificates you need to use.
Verbose log: Sun Apr 14 16:55:58 2019 : Info: Ready to process requests
PLEASE read the documentation on what to post to the list. When you join the list, you get an email message telling to read the documentation. It includes a URL. PLEASE read it. http://wiki.freeradius.org/list-help Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
hi, look at the debug...or even your config file - it'll tell you what files the server is reading. in your case thats private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" so, for some reason your server is using the main system CA blob and snakeoil certs rather than bespoke cert for the service. change that to read the freeradius3/certs/ stuff and you'll be set alan On Mon, 15 Apr 2019 at 06:19, <rbbhill@gmail.com> wrote:
Thanks for your help Alan,
I am not using a standalone supplicant, other than the wpa_supplicant utility on the Pi with freeradius. The eapol_test configuration is pointing to the freeradius ca.der per the following configuration. As you pointed out in the previous email, the server isn't using /etc/freeradius/3.0/certs/, it is getting the ca from somewhere else. I have listed the debug output below, but I am still unable to determine the directory being called for ca presentation.
# # eapol_test -c ttls-eap-mschapv2.conf -s testing123 # network={ ssid="example" key_mgmt=WPA-EAP eap=TTLS identity="bob" anonymous_identity="anonymous" password="hello" phase2="autheap=MSCHAPV2"
# # Uncomment the following to perform server certificate validation. ca_cert="/etc/freeradius/3.0/certs/ca.der" }
--Debug-- FreeRADIUS Version 3.0.12 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client ubiquiti { ipaddr = 192.168.2.8 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_radutmp } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 39598 Listening on proxy address :: port 32944 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:35583 to 127.0.0.1:1812 length 132 (0) User-Name = "anonymous" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (0) Message-Authenticator = 0xe91a0a4211375b1ec592ef82043b6839 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 14 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0xa1b0858aa1b19c09 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (0) EAP-Message = 0x010100061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa1b0858aa1b19c0998614206367371a6 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 127.0.0.1:35583 to 127.0.0.1:1812 length 318 (1) User-Name = "anonymous" (1) NAS-IP-Address = 127.0.0.1 (1) Calling-Station-Id = "02-00-00-00-00-01" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) EAP-Message = 0x020100b61980000000ac16030100a7010000a30303860bf8a8872d1814268455ce17a2a87e0d798884edef35eb0ee04b06fe9b8e20000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c02$ (1) State = 0xa1b0858aa1b19c0998614206367371a6 (1) Message-Authenticator = 0x90b9549c1e19de3cc3f127394790a5fc (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 182 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xa1b0858aa1b19c09 (1) eap: Finished EAP session with state 0xa1b0858aa1b19c09 (1) eap: Previous EAP request found for state 0xa1b0858aa1b19c09, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 172 bytes (1) eap_peap: Got complete TLS record (172 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv TLS 1.2 [length 00a7] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 02d9] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1004 (1) eap: EAP session adding &reply:State = 0xa1b0858aa0b29c09 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (1) EAP-Message = 0x010203ec19c00000047b160303003d0200003903032c3dd45b424431005f4380406ed090071978ceaa63a168b4b345da59a69bd69800c030000011ff01000100000b0004030001020017000016030302d90b000$ (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa1b0858aa0b29c0998614206367371a6 (1) Finished request Waking up in 4.4 seconds. (1) Finished request Waking up in 4.4 seconds. (2) Received Access-Request Id 2 from 127.0.0.1:35583 to 127.0.0.1:1812 length 142 (2) User-Name = "anonymous" (2) NAS-IP-Address = 127.0.0.1 (2) Calling-Station-Id = "02-00-00-00-00-01" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) EAP-Message = 0x020200061900 (2) State = 0xa1b0858aa0b29c0998614206367371a6 (2) Message-Authenticator = 0x14d43f9302cd8700a726df43ba10eb6d (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xa1b0858aa0b29c09 (2) eap: Finished EAP session with state 0xa1b0858aa0b29c09 (2) eap: Previous EAP request found for state 0xa1b0858aa0b29c09, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 159 (2) eap: EAP session adding &reply:State = 0xa1b0858aa3b39c09 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0 (2) EAP-Message = 0x0103009f1900288cc33aa919f74cbdfb1fadaf8ac3a901f95d86cbe5fb4bb4d84cac8f3a8b60a3e5dabcf82c5079577efa11938f12a720ffea242b9b235c775df675f2adbefe2e8796a8d0fd1a95fe76e923790$ (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xa1b0858aa3b39c0998614206367371a6 (2) Finished request Waking up in 4.4 seconds. (3) Received Access-Request Id 3 from 127.0.0.1:35583 to 127.0.0.1:1812 length 153 (3) User-Name = "anonymous" (3) NAS-IP-Address = 127.0.0.1 (3) Calling-Station-Id = "02-00-00-00-00-01" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x0203001119800000000715030300020230 (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) EAP-Message = 0x0203001119800000000715030300020230 (3) State = 0xa1b0858aa3b39c0998614206367371a6 (3) Message-Authenticator = 0xa20feef604022ea0d15e1afbf4edf672 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 17 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09 (3) authenticate { (3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09 (3) eap: Finished EAP session with state 0xa1b0858aa3b39c09 (3) eap: Previous EAP request found for state 0xa1b0858aa3b39c09, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 7 bytes (3) eap_peap: Got complete TLS record (7 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: <<< recv TLS 1.2 [length 0002] (3) eap_peap: ERROR: TLS Alert read:fatal:unknown CA (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (3) eap_peap: ERROR: System call (I/O) error (-1) (3) eap_peap: ERROR: TLS receive handshake failed during operation (3) eap_peap: ERROR: [eaptls process] = fail (3) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (3) eap: Sending EAP Failure (code 4) ID 3 length 4 (3) eap: Failed in EAP select (3) [eap] = invalid (3) } # authenticate = invalid (3) Failed to authenticate the user (3) Using Post-Auth-Type Reject (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Post-Auth-Type REJECT { (3) attr_filter.access_reject: EXPAND %{User-Name} (3) attr_filter.access_reject: --> anonymous (3) attr_filter.access_reject: Matched entry DEFAULT at line 11 (3) [attr_filter.access_reject] = updated (3) [eap] = noop (3) policy remove_reply_message_if_eap { (3) if (&reply:EAP-Message && &reply:Reply-Message) { (3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (3) else { (3) [noop] = noop (3) } # else = noop (3) } # policy remove_reply_message_if_eap = noop (3) } # Post-Auth-Type REJECT = updated (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. (3) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (3) Sending delayed response (3) Sent Access-Reject Id 3 from 127.0.0.1:1812 to 127.0.0.1:35583 length 44 (3) EAP-Message = 0x04030004 (3) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.3 seconds. (0) Cleaning up request packet ID 0 with timestamp +13 Waking up in 0.4 seconds. (1) Cleaning up request packet ID 1 with timestamp +13 (2) Cleaning up request packet ID 2 with timestamp +14 (3) Cleaning up request packet ID 3 with timestamp +14 Ready to process requests (4) Received Access-Request Id 0 from 127.0.0.1:53791 to 127.0.0.1:1812 length 132 (4) User-Name = "anonymous" (4) NAS-IP-Address = 127.0.0.1 (4) Calling-Station-Id = "02-00-00-00-00-01" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) EAP-Message = 0x0200000e01616e6f6e796d6f7573 (4) Message-Authenticator = 0x74f485700ace38d3a912177314edd716 (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 0 length 14 (4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Peer sent packet with method EAP Identity (1) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Initiating new EAP-TLS session (4) eap_peap: [eaptls start] = request (4) eap: Sending EAP Request (code 1) ID 1 length 6 (4) eap: EAP session adding &reply:State = 0x7cb2fc507cb3e55b (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (4) EAP-Message = 0x010100061920 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x7cb2fc507cb3e55b86cd612645cba906 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 1 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142 (5) User-Name = "anonymous" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) NAS-IP-Address = 127.0.0.1 (5) Calling-Station-Id = "02-00-00-00-00-01" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) EAP-Message = 0x020100060315 (5) State = 0x7cb2fc507cb3e55b86cd612645cba906 (5) Message-Authenticator = 0xad804965169d36f2bb3fbe585f3220a4 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 1 length 6 (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) eap: No EAP Start, assuming it's an on-going EAP conversation (5) [eap] = updated (5) [files] = noop (5) [expiration] = noop (5) [logintime] = noop (5) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (5) pap: WARNING: Authentication will fail unless a "known good" password is available (5) [pap] = noop (5) } # authorize = updated (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x7cb2fc507cb3e55b (5) eap: Finished EAP session with state 0x7cb2fc507cb3e55b (5) eap: Previous EAP request found for state 0x7cb2fc507cb3e55b, released from the list (5) eap: Peer sent packet with method EAP NAK (3) (5) eap: Found mutually acceptable type TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Initiating new EAP-TLS session (5) eap_ttls: [eaptls start] = request (5) eap: Sending EAP Request (code 1) ID 2 length 6 (5) eap: EAP session adding &reply:State = 0x7cb2fc507db0e95b (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (5) EAP-Message = 0x010200061520 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7cb2fc507db0e95b86cd612645cba906 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 2 from 127.0.0.1:53791 to 127.0.0.1:1812 length 314 (6) User-Name = "anonymous" (6) NAS-IP-Address = 127.0.0.1 (6) Calling-Station-Id = "02-00-00-00-00-01" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) EAP-Message = 0x020200b2150016030100a7010000a30303e51f51535de3983944d2582d0174d45753f0a856d58bf732c0992d00fd150a29000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00$ (6) State = 0x7cb2fc507db0e95b86cd612645cba906 (6) Message-Authenticator = 0x909d8709bdfa74503ee132f431a8b8f0 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 2 length 178 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x7cb2fc507db0e95b (6) eap: Finished EAP session with state 0x7cb2fc507db0e95b (6) eap: Previous EAP request found for state 0x7cb2fc507db0e95b, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: [eaptls verify] = ok (6) eap_ttls: Done initial handshake (6) eap_ttls: (other): before SSL initialization (6) eap_ttls: TLS_accept: before SSL initialization (6) eap_ttls: TLS_accept: before SSL initialization (6) eap_ttls: <<< recv TLS 1.2 [length 00a7] (6) eap_ttls: TLS_accept: SSLv3/TLS read client hello (6) eap_ttls: >>> send TLS 1.2 [length 003d] (6) eap_ttls: TLS_accept: SSLv3/TLS write server hello (6) eap_ttls: >>> send TLS 1.2 [length 02d9] (6) eap_ttls: TLS_accept: SSLv3/TLS write certificate (6) eap_ttls: >>> send TLS 1.2 [length 014d] (6) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (6) eap_ttls: >>> send TLS 1.2 [length 0004] (6) eap_ttls: TLS_accept: SSLv3/TLS write server done (6) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (6) eap_ttls: In SSL Handshake Phase (6) eap_ttls: In SSL Accept mode (6) eap_ttls: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 3 length 1004 (6) eap: EAP session adding &reply:State = 0x7cb2fc507eb1e95b (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (6) EAP-Message = 0x010303ec15c00000047b160303003d020000390303a48ec3291ffdad331434cd1f53656a17297fa14fa438832d137d7062f380961a00c030000011ff01000100000b0004030001020017000016030302d90b000$ (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7cb2fc507eb1e95b86cd612645cba906 (6) Finished request Waking up in 4.5 seconds. (6) Finished request Waking up in 4.5 seconds. (7) Received Access-Request Id 3 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142 (7) User-Name = "anonymous" (7) NAS-IP-Address = 127.0.0.1 (7) Calling-Station-Id = "02-00-00-00-00-01" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) EAP-Message = 0x020300061500 (7) State = 0x7cb2fc507eb1e95b86cd612645cba906 (7) Message-Authenticator = 0xf57e52dc860514e1764acd8786783de4 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" ((7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 3 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x7cb2fc507eb1e95b (7) eap: Finished EAP session with state 0x7cb2fc507eb1e95b (7) eap: Previous EAP request found for state 0x7cb2fc507eb1e95b, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: Continuing EAP-TLS (7) eap_ttls: Peer ACKed our handshake fragment (7) eap_ttls: [eaptls verify] = request (7) eap_ttls: [eaptls process] = handled (7) eap: Sending EAP Request (code 1) ID 4 length 163 (7) eap: EAP session adding &reply:State = 0x7cb2fc507fb6e95b (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0 (7) EAP-Message = 0x010400a315800000047bd69a449daa4cab88a2395250ee31e2f61df036299c8d214844e9a4262a33f7dc86ee88f1cd5798105e54d219748d7ec63624ddfb4c8c3aa0cafead3bc956443ddcc15681270e33f8b2f$ (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x7cb2fc507fb6e95b86cd612645cba906 (7) Finished request Waking up in 4.4 seconds. (8) Received Access-Request Id 4 from 127.0.0.1:53791 to 127.0.0.1:1812 length 149 (8) User-Name = "anonymous" (8) NAS-IP-Address = 127.0.0.1 (8) Calling-Station-Id = "02-00-00-00-00-01" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) EAP-Message = 0x0204000d150015030300020230 (8) State = 0x7cb2fc507fb6e95b86cd612645cba906 (8) Message-Authenticator = 0xda8bbc41c56e142e1af7d9e1eb13d763 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 4 length 13 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x7cb2fc507fb6e95b (8) eap: Finished EAP session with state 0x7cb2fc507fb6e95b (8) eap: Previous EAP request found for state 0x7cb2fc507fb6e95b, released from the list (8) eap: Peer sent packet with method EAP TTLS (21) (8) eap: Calling submodule eap_ttls to process data (8) eap_ttls: Authenticate (8) eap_ttls: Continuing EAP-TLS (8) eap_ttls: [eaptls verify] = ok (8) eap_ttls: Done initial handshake (8) eap_ttls: <<< recv TLS 1.2 [length 0002] (8) eap_ttls: ERROR: TLS Alert read:fatal:unknown CA (8) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (8) eap_ttls: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca (8) eap_ttls: ERROR: System call (I/O) error (-1) (8) eap_ttls: ERROR: TLS receive handshake failed during operation (8) eap_ttls: ERROR: [eaptls process] = fail (8) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 4 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> anonymous (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:53791 length 44 (8) EAP-Message = 0x04040004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.3 seconds. (4) Cleaning up request packet ID 0 with timestamp +37 (5) Cleaning up request packet ID 1 with timestamp +37 Waking up in 0.3 seconds. (6) Cleaning up request packet ID 2 with timestamp +38 (7) Cleaning up request packet ID 3 with timestamp +38 Waking up in 0.1 seconds. (8) Cleaning up request packet ID 4 with timestamp +38 Ready to process requests
-----Original Message----- From: Freeradius-Users <freeradius-users-bounces+rbbhill=gmail.com@lists.freeradius.org> On Behalf Of Alan DeKok Sent: Sunday, April 14, 2019 6:35 PM To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: Freeradius - eapol testing failure
On Apr 14, 2019, at 7:18 PM, rbbhill@gmail.com wrote:
Hi all, thanks for your help in advance. I have spent the last week trying to solve this issue, I have read and read all information I can find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl. For the freeradius I have followed the guides by each detail in full, the only exception is replacing etc/raddb with etc/freeradius/3.0. The freeradius server is set up and running and I have completed testing with local host using radtest and eapol. Test results:
OK.
PAP Localhost = Ok, passes - used radtest bob hello localhost 0 testing123
EAP (using EAPOL) PEAPv0_EAP-MSCHAPv2 = Ok, Passes EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes
That's good.
Good so far, next I edit EAPOL test scripts to uncomment so as to use the test certs for testing. The only thing I changed here was /etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to point test utility to the correct directory.
Sure.
EAP (using EAPOL with cert check uncommented) PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
That means you haven't told eapol_test what the CA cert is.
The eapol_test configuration file *should* point to the correct CA file. If that's done, then the "unknown CA" error should go away.
I followed deployingradius, and used make to build certs, they are all populated in the directory, but tests repeatedly fail. This same error comes up repeatedly across peap and ttls using cert:
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__ (SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
That's eapol_test telling FreeRADIUS that eapol_test doesn't like the CA cert being presented by FreeRADIUS.
If this authentication isn't with eapol_test, then the same comment applies. Configure the supplicant to know about the CA cert used by FreeRADIUS.
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : ERROR: (9) eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed
I am very new to radius, and I am trying to setup the server to test with some headless devices, and they need to be able to support PEAP, TLS, and TTLS with certs. I went as far as setting a completely identical server on another Pi and tried with production certificates, with same error. The only thing I notice different is that when I access the network with my iphone, the public cert it sends my iphone is completely different than any of the certs in /etc/freeradius/3.0/certs/.
Then the server isn't using /etc/freeradius/3.0/certs/, is it?
READ the debug output. ALL OF IT. It will print out what files it's reading, including which certificates it's reading. Those are the certificates you need to use.
Verbose log: Sun Apr 14 16:55:58 2019 : Info: Ready to process requests
PLEASE read the documentation on what to post to the list. When you join the list, you get an email message telling to read the documentation. It includes a URL. PLEASE read it.
http://wiki.freeradius.org/list-help
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Apr 15, 2019, at 1:18 AM, rbbhill@gmail.com wrote:
I am not using a standalone supplicant, other than the wpa_supplicant utility on the Pi with freeradius. The eapol_test configuration is pointing to the freeradius ca.der per the following configuration. As you pointed out in the previous email, the server isn't using /etc/freeradius/3.0/certs/, it is getting the ca from somewhere else. I have listed the debug output below, but I am still unable to determine the directory being called for ca presentation.
I'm sorry, but that's not a good answer. You know it's reading certificates. If you just search the debug output for "cert", you will get the answer. Or, read mods-enabled/eap. The configuration files are *text*. You can *read them*. The configuration files tell you which certificate files it's loading. It shouldn't be difficult to read the configuration files that come with the server. If this is hard to do, you will have a very bad time trying to configure anything complex. Alan DeKok.
participants (3)
-
Alan Buxey -
Alan DeKok -
rbbhill@gmail.com