RE: Freeradius - eapol testing failure

15 Apr 2019

      Thanks for your help Alan,

I am not using a standalone supplicant, other than the wpa_supplicant utility on the Pi with freeradius. The eapol_test configuration is pointing to the freeradius ca.der per the following configuration. As you pointed out in the previous email, the server isn't using /etc/freeradius/3.0/certs/, it is getting the ca from somewhere else. I have listed the debug output below, but I am still unable to determine the directory being called for ca presentation.

#
#   eapol_test -c ttls-eap-mschapv2.conf -s testing123
#
network={
        ssid="example"
        key_mgmt=WPA-EAP
        eap=TTLS
        identity="bob"
        anonymous_identity="anonymous"
        password="hello"
        phase2="autheap=MSCHAPV2"

        #
        #  Uncomment the following to perform server certificate validation.
        ca_cert="/etc/freeradius/3.0/certs/ca.der"
}

--Debug--
FreeRADIUS Version 3.0.12
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client ubiquiti {
        ipaddr = 192.168.2.8
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_radutmp
  }
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
        filename = "/etc/freeradius/3.0/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
        default_eap_type = "peap"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  instantiate {
  }
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"   found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"      found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/3.0/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
        ca_file = "/etc/ssl/certs/ca-certificates.crt"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/3.0/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 39598
Listening on proxy address :: port 32944
Ready to process requests
(0) Received Access-Request Id 0 from 127.0.0.1:35583 to 127.0.0.1:1812 length 132
(0)   User-Name = "anonymous"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x0200000e01616e6f6e796d6f7573
(0)   Message-Authenticator = 0xe91a0a4211375b1ec592ef82043b6839
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new EAP-TLS session
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 1 length 6
(0) eap: EAP session adding &reply:State = 0xa1b0858aa1b19c09
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
(0)   EAP-Message = 0x010100061920
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xa1b0858aa1b19c0998614206367371a6
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 127.0.0.1:35583 to 127.0.0.1:1812 length 318
(1)   User-Name = "anonymous"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   Service-Type = Framed-User
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x020100b61980000000ac16030100a7010000a30303860bf8a8872d1814268455ce17a2a87e0d798884edef35eb0ee04b06fe9b8e20000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c02$
(1)   State = 0xa1b0858aa1b19c0998614206367371a6
(1)   Message-Authenticator = 0x90b9549c1e19de3cc3f127394790a5fc
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 182
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xa1b0858aa1b19c09
(1) eap: Finished EAP session with state 0xa1b0858aa1b19c09
(1) eap: Previous EAP request found for state 0xa1b0858aa1b19c09, released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Continuing EAP-TLS
(1) eap_peap: Peer indicated complete TLS record size will be 172 bytes
(1) eap_peap: Got complete TLS record (172 bytes)
(1) eap_peap: [eaptls verify] = length included
(1) eap_peap: (other): before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: <<< recv TLS 1.2  [length 00a7]
(1) eap_peap: TLS_accept: SSLv3/TLS read client hello
(1) eap_peap: >>> send TLS 1.2  [length 003d]
(1) eap_peap: TLS_accept: SSLv3/TLS write server hello
(1) eap_peap: >>> send TLS 1.2  [length 02d9]
(1) eap_peap: TLS_accept: SSLv3/TLS write certificate
(1) eap_peap: >>> send TLS 1.2  [length 014d]
(1) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(1) eap_peap: >>> send TLS 1.2  [length 0004]
(1) eap_peap: TLS_accept: SSLv3/TLS write server done
(1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_peap: In SSL Handshake Phase
(1) eap_peap: In SSL Accept mode
(1) eap_peap: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 2 length 1004
(1) eap: EAP session adding &reply:State = 0xa1b0858aa0b29c09
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
(1)   EAP-Message = 0x010203ec19c00000047b160303003d0200003903032c3dd45b424431005f4380406ed090071978ceaa63a168b4b345da59a69bd69800c030000011ff01000100000b0004030001020017000016030302d90b000$
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xa1b0858aa0b29c0998614206367371a6
(1) Finished request
Waking up in 4.4 seconds.
(1) Finished request
Waking up in 4.4 seconds.
(2) Received Access-Request Id 2 from 127.0.0.1:35583 to 127.0.0.1:1812 length 142
(2)   User-Name = "anonymous"
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = "02-00-00-00-00-01"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Connect-Info = "CONNECT 11Mbps 802.11b"
(2)   EAP-Message = 0x020200061900
(2)   State = 0xa1b0858aa0b29c0998614206367371a6
(2)   Message-Authenticator = 0x14d43f9302cd8700a726df43ba10eb6d
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xa1b0858aa0b29c09
(2) eap: Finished EAP session with state 0xa1b0858aa0b29c09
(2) eap: Previous EAP request found for state 0xa1b0858aa0b29c09, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer ACKed our handshake fragment
(2) eap_peap: [eaptls verify] = request
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 159
(2) eap: EAP session adding &reply:State = 0xa1b0858aa3b39c09
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:35583 length 0
(2)   EAP-Message = 0x0103009f1900288cc33aa919f74cbdfb1fadaf8ac3a901f95d86cbe5fb4bb4d84cac8f3a8b60a3e5dabcf82c5079577efa11938f12a720ffea242b9b235c775df675f2adbefe2e8796a8d0fd1a95fe76e923790$
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xa1b0858aa3b39c0998614206367371a6
(2) Finished request
Waking up in 4.4 seconds.
(3) Received Access-Request Id 3 from 127.0.0.1:35583 to 127.0.0.1:1812 length 153
(3)   User-Name = "anonymous"
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = "02-00-00-00-00-01"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x0203001119800000000715030300020230
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x0203001119800000000715030300020230
(3)   State = 0xa1b0858aa3b39c0998614206367371a6
(3)   Message-Authenticator = 0xa20feef604022ea0d15e1afbf4edf672
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 17
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xa1b0858aa3b39c09
(3) eap: Finished EAP session with state 0xa1b0858aa3b39c09
(3) eap: Previous EAP request found for state 0xa1b0858aa3b39c09, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer indicated complete TLS record size will be 7 bytes
(3) eap_peap: Got complete TLS record (7 bytes)
(3) eap_peap: [eaptls verify] = length included
(3) eap_peap: <<< recv TLS 1.2  [length 0002]
(3) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
(3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(3) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
(3) eap_peap: ERROR: System call (I/O) error (-1)
(3) eap_peap: ERROR: TLS receive handshake failed during operation
(3) eap_peap: ERROR: [eaptls process] = fail
(3) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed
(3) eap: Sending EAP Failure (code 4) ID 3 length 4
(3) eap: Failed in EAP select
(3)     [eap] = invalid
(3)   } # authenticate = invalid
(3) Failed to authenticate the user
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Post-Auth-Type REJECT {
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject:    --> anonymous
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3)     [attr_filter.access_reject] = updated
(3)     [eap] = noop
(3)     policy remove_reply_message_if_eap {
(3)       if (&reply:EAP-Message && &reply:Reply-Message) {
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(3)       else {
(3)         [noop] = noop
(3)       } # else = noop
(3)     } # policy remove_reply_message_if_eap = noop
(3)   } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 3 from 127.0.0.1:1812 to 127.0.0.1:35583 length 44
(3)   EAP-Message = 0x04030004
(3)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.3 seconds.
(0) Cleaning up request packet ID 0 with timestamp +13
Waking up in 0.4 seconds.
(1) Cleaning up request packet ID 1 with timestamp +13
(2) Cleaning up request packet ID 2 with timestamp +14
(3) Cleaning up request packet ID 3 with timestamp +14
Ready to process requests
(4) Received Access-Request Id 0 from 127.0.0.1:53791 to 127.0.0.1:1812 length 132
(4)   User-Name = "anonymous"
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = "02-00-00-00-00-01"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Connect-Info = "CONNECT 11Mbps 802.11b"
(4)   EAP-Message = 0x0200000e01616e6f6e796d6f7573
(4)   Message-Authenticator = 0x74f485700ace38d3a912177314edd716
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 0 length 14
(4) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Peer sent packet with method EAP Identity (1)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Initiating new EAP-TLS session
(4) eap_peap: [eaptls start] = request
(4) eap: Sending EAP Request (code 1) ID 1 length 6
(4) eap: EAP session adding &reply:State = 0x7cb2fc507cb3e55b
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
(4)   EAP-Message = 0x010100061920
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x7cb2fc507cb3e55b86cd612645cba906
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 1 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142
(5)   User-Name = "anonymous"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Connect-Info = "CONNECT 11Mbps 802.11b"
(5)   EAP-Message = 0x020100060315
(5)   State = 0x7cb2fc507cb3e55b86cd612645cba906
(5)   Message-Authenticator = 0xad804965169d36f2bb3fbe585f3220a4
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 1 length 6
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5) pap: WARNING: No "known good" password found for the user.  Not setting Auth-Type
(5) pap: WARNING: Authentication will fail unless a "known good" password is available
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x7cb2fc507cb3e55b
(5) eap: Finished EAP session with state 0x7cb2fc507cb3e55b
(5) eap: Previous EAP request found for state 0x7cb2fc507cb3e55b, released from the list
(5) eap: Peer sent packet with method EAP NAK (3)
(5) eap: Found mutually acceptable type TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Initiating new EAP-TLS session
(5) eap_ttls: [eaptls start] = request
(5) eap: Sending EAP Request (code 1) ID 2 length 6
(5) eap: EAP session adding &reply:State = 0x7cb2fc507db0e95b
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found.  Ignoring.
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
(5)   EAP-Message = 0x010200061520
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x7cb2fc507db0e95b86cd612645cba906
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 2 from 127.0.0.1:53791 to 127.0.0.1:1812 length 314
(6)   User-Name = "anonymous"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   EAP-Message = 0x020200b2150016030100a7010000a30303e51f51535de3983944d2582d0174d45753f0a856d58bf732c0992d00fd150a29000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00$
(6)   State = 0x7cb2fc507db0e95b86cd612645cba906
(6)   Message-Authenticator = 0x909d8709bdfa74503ee132f431a8b8f0
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(6) suffix: No such realm "NULL"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 2 length 178
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x7cb2fc507db0e95b
(6) eap: Finished EAP session with state 0x7cb2fc507db0e95b
(6) eap: Previous EAP request found for state 0x7cb2fc507db0e95b, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: (other): before SSL initialization
(6) eap_ttls: TLS_accept: before SSL initialization
(6) eap_ttls: TLS_accept: before SSL initialization
(6) eap_ttls: <<< recv TLS 1.2  [length 00a7]
(6) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(6) eap_ttls: >>> send TLS 1.2  [length 003d]
(6) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(6) eap_ttls: >>> send TLS 1.2  [length 02d9]
(6) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(6) eap_ttls: >>> send TLS 1.2  [length 014d]
(6) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
(6) eap_ttls: >>> send TLS 1.2  [length 0004]
(6) eap_ttls: TLS_accept: SSLv3/TLS write server done
(6) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(6) eap_ttls: In SSL Handshake Phase
(6) eap_ttls: In SSL Accept mode
(6) eap_ttls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 3 length 1004
(6) eap: EAP session adding &reply:State = 0x7cb2fc507eb1e95b
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found.  Ignoring.
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
(6)   EAP-Message = 0x010303ec15c00000047b160303003d020000390303a48ec3291ffdad331434cd1f53656a17297fa14fa438832d137d7062f380961a00c030000011ff01000100000b0004030001020017000016030302d90b000$
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x7cb2fc507eb1e95b86cd612645cba906
(6) Finished request
Waking up in 4.5 seconds.
(6) Finished request
Waking up in 4.5 seconds.
(7) Received Access-Request Id 3 from 127.0.0.1:53791 to 127.0.0.1:1812 length 142
(7)   User-Name = "anonymous"
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7)   EAP-Message = 0x020300061500
(7)   State = 0x7cb2fc507eb1e95b86cd612645cba906
(7)   Message-Authenticator = 0xf57e52dc860514e1764acd8786783de4
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(7) suffix: No such realm "NULL"
((7) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(7) suffix: No such realm "NULL"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 3 length 6
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x7cb2fc507eb1e95b
(7) eap: Finished EAP session with state 0x7cb2fc507eb1e95b
(7) eap: Previous EAP request found for state 0x7cb2fc507eb1e95b, released from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: Continuing EAP-TLS
(7) eap_ttls: Peer ACKed our handshake fragment
(7) eap_ttls: [eaptls verify] = request
(7) eap_ttls: [eaptls process] = handled
(7) eap: Sending EAP Request (code 1) ID 4 length 163
(7) eap: EAP session adding &reply:State = 0x7cb2fc507fb6e95b
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found.  Ignoring.
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:53791 length 0
(7)   EAP-Message = 0x010400a315800000047bd69a449daa4cab88a2395250ee31e2f61df036299c8d214844e9a4262a33f7dc86ee88f1cd5798105e54d219748d7ec63624ddfb4c8c3aa0cafead3bc956443ddcc15681270e33f8b2f$
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x7cb2fc507fb6e95b86cd612645cba906
(7) Finished request
Waking up in 4.4 seconds.
(8) Received Access-Request Id 4 from 127.0.0.1:53791 to 127.0.0.1:1812 length 149
(8)   User-Name = "anonymous"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message = 0x0204000d150015030300020230
(8)   State = 0x7cb2fc507fb6e95b86cd612645cba906
(8)   Message-Authenticator = 0xda8bbc41c56e142e1af7d9e1eb13d763
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
(8) suffix: No such realm "NULL"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 4 length 13
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x7cb2fc507fb6e95b
(8) eap: Finished EAP session with state 0x7cb2fc507fb6e95b
(8) eap: Previous EAP request found for state 0x7cb2fc507fb6e95b, released from the list
(8) eap: Peer sent packet with method EAP TTLS (21)
(8) eap: Calling submodule eap_ttls to process data
(8) eap_ttls: Authenticate
(8) eap_ttls: Continuing EAP-TLS
(8) eap_ttls: [eaptls verify] = ok
(8) eap_ttls: Done initial handshake
(8) eap_ttls: <<< recv TLS 1.2  [length 0002]
(8) eap_ttls: ERROR: TLS Alert read:fatal:unknown CA
(8) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(8) eap_ttls: ERROR: Failed in __FUNCTION__ (SSL_read): error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca
(8) eap_ttls: ERROR: System call (I/O) error (-1)
(8) eap_ttls: ERROR: TLS receive handshake failed during operation
(8) eap_ttls: ERROR: [eaptls process] = fail
(8) eap: ERROR: Failed continuing EAP TTLS (21) session.  EAP sub-module failed
(8) eap: Sending EAP Failure (code 4) ID 4 length 4
(8) eap: Failed in EAP select
(8)     [eap] = invalid
(8)   } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject:    --> anonymous
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8)     [attr_filter.access_reject] = updated
(8)     [eap] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
(8)   } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.2 seconds.
Waking up in 0.7 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 4 from 127.0.0.1:1812 to 127.0.0.1:53791 length 44
(8)   EAP-Message = 0x04040004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.3 seconds.
(4) Cleaning up request packet ID 0 with timestamp +37
(5) Cleaning up request packet ID 1 with timestamp +37
Waking up in 0.3 seconds.
(6) Cleaning up request packet ID 2 with timestamp +38
(7) Cleaning up request packet ID 3 with timestamp +38
Waking up in 0.1 seconds.
(8) Cleaning up request packet ID 4 with timestamp +38
Ready to process requests

-----Original Message-----
From: Freeradius-Users <freeradius-users-bounces+rbbhill=gmail.com@lists.freeradius.org> On Behalf Of Alan DeKok
Sent: Sunday, April 14, 2019 6:35 PM
To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org>
Subject: Re: Freeradius - eapol testing failure

On Apr 14, 2019, at 7:18 PM, rbbhill@gmail.com wrote:
...
Hi all, thanks for your help in advance. I have spent the last week 
trying to solve this issue, I have read and read all information I can 
find. I have set up a raspberry pi 3, with freeradius 3.0 and openssl. 
For the freeradius I have followed the guides by each detail in full, 
the only exception is replacing etc/raddb with etc/freeradius/3.0. The 
freeradius server is set up and running and I have completed testing 
with local host using radtest and eapol. Test results:
OK.
...
PAP
Localhost = Ok, passes - used radtest bob hello localhost 0 testing123
EAP (using EAPOL)
PEAPv0_EAP-MSCHAPv2 = Ok, Passes
EAP-TTLS_EAP-MSCHAPv2 = Ok, Passes
That's good.
...
Good so far, next I edit EAPOL test scripts to uncomment so as to use 
the test certs for testing. The only thing I changed here was 
/etc/raddb/certs/ca.der to /etc/freeradius/3.0/certs/ca.der so as to 
point test utility to the correct directory.
Sure.
...
EAP (using EAPOL with cert check uncommented)
PEAPv0_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
EAP-TTLS_EAP-MSCHAPv2 = Fails, TLS Alert read:fatal:unknown CA
That means you haven't told eapol_test what the CA cert is.

  The eapol_test configuration file *should* point to the correct CA file.  If that's done, then the "unknown CA" error should go away.
...
I followed deployingradius, and used make to build certs, they are all 
populated in the directory, but tests repeatedly fail. This same error 
comes up repeatedly across peap and ttls using cert:
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS Alert 
read:fatal:unknown CA Sun Apr 14 16:56:49 2019 : Debug: (9) eap_ttls: 
TLS_accept: Need to read more data: SSLv3/TLS write server done Sun 
Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: Failed in __FUNCTION__
(SSL_read): ../ssl/record/rec_layer_s3.c[1407]:error:14094418:SSL
routines:ssl3_read_bytes:tlsv1 alert unknown ca
That's eapol_test telling FreeRADIUS that eapol_test doesn't like the CA cert being presented by FreeRADIUS.

  If this authentication isn't with eapol_test, then the same comment applies.  Configure the supplicant to know about the CA cert used by FreeRADIUS.
...
Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: System call (I/O) 
error (-1) Sun Apr 14 16:56:49 2019 : ERROR: (9) eap_ttls: TLS receive 
handshake failed during operation Sun Apr 14 16:56:49 2019 : ERROR: 
(9) eap_ttls: [eaptls process] = fail Sun Apr 14 16:56:49 2019 : 
ERROR: (9) eap: Failed continuing EAP TTLS (21) session.  EAP 
sub-module failed
I am very new to radius, and I am trying to setup the server to test 
with some headless devices, and they need to be able to support PEAP, 
TLS, and TTLS with certs. I went as far as setting a completely 
identical server on another Pi and tried with production certificates, 
with same error. The only thing I notice different is that when I 
access the network with my iphone, the public cert it sends my iphone 
is completely different than any of the certs in /etc/freeradius/3.0/certs/.
Then the server isn't using /etc/freeradius/3.0/certs/, is it?

  READ the debug output.  ALL OF IT.  It will print out what files it's reading, including which certificates it's reading.  Those are the certificates you need to use.
...
Verbose log:
Sun Apr 14 16:55:58 2019 : Info: Ready to process requests
PLEASE read the documentation on what to post to the list.  When you join the list, you get an email message telling to read the documentation.  It includes a URL.  PLEASE read it.

http://wiki.freeradius.org/list-help

  Alan DeKok.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

RE: Freeradius - eapol testing failure

rbbhill＠gmail.com