Auth-Type fail

6 Jul 2011

      Hi list,

I have problem authenticating users against (My)SQL.
Freeradius is running on a FreeBSD 8.0-STABLE and is on version 2.1.10.

It is a fresh install that I made work with the default file 
authentication.
When I connect the SQL backend, it doesn't work.
I followed the instructions on the FreeRADIUS wiki : 
http://wiki.freeradius.org/SQl_HOWTO

The SQL module is correctly loaded and it returns an OK during 
authentication.
The queries are well formed and the results should be ok

What I don't understand is why sql module returns OK, and the 
authentication is rejected. In my mind, an OK from the SQL module at 
this step means it has authenticated the user.
Am I misunderstanding ?

The debug output and relevant configuration directives are below.

P.S. : 10.1.8.4 is the IP of the server, I'm running radtest commands 
from this host (I can't use 127.0.0.1 because of how network currently 
works in jails on FreeBSD).

Here is the output of the radtest command :

# radtest bsemene test 10.1.8.4 0 "password for jail client"
Sending Access-Request of id 214 to 10.1.8.4 port 1812
         User-Name = "bsemene"
         User-Password = "test"
         NAS-IP-Address = 10.1.8.4
         NAS-Port = 0
rad_recv: Access-Reject packet from host 10.1.8.4 port 1812, id=214, 
length=20

Here is the debug output during authentication :

rad_recv: Access-Request packet from host 10.1.8.4 port 44065, id=138, 
length=59
         User-Name = "bsemene"
         User-Password = "test"
         NAS-IP-Address = 10.1.8.4
         NAS-Port = 0
# Executing section authorize from file 
/usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "bsemene", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql]   expand: %{Stripped-User-Name} ->
[sql]   ... expanding second conditional
[sql]   expand: %{User-Name} -> bsemene
[sql]   expand: %{%{User-Name}:-DEFAULT} -> bsemene
[sql]   expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> 
bsemene
[sql] sql_set_user escaped user --> 'bsemene'
rlm_sql (sql): Reserving sql socket id: 4
[sql]   expand: SELECT id, username, attribute, value, op          FROM 
radcheck          WHERE username = BINARY '%{SQL-User-Name}'          
ORDER BY id -> SELECT id, username, attribute, value, opFROM 
radcheck          WHERE username = BINARY 'bsemene'          ORDER BY id
[sql]   expand: SELECT groupname          FROM radusergroup          
WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY priority -> 
SELECT groupname          FROM radusergroup          WHEe = BINARY 
'bsemene'          ORDER BY priority
[sql]   expand: SELECT id, groupname, attribute,           Value, 
op           FROM radgroupcheck           WHERE groupname = 
'%{Sql-Group}'           ORDER BY id -> SELECT id, groupname, attribute, 
Value, op           FROM radgroupcheck           WHERE groupname = 
'dynamic'           ORDER BY id
[sql] User found in group dynamic
[sql]   expand: SELECT id, groupname, attribute,           value, 
op           FROM radgroupreply           WHERE groupname = 
'%{Sql-Group}'           ORDER BY id -> SELECT id, groupname, attribute, 
value, op           FROM radgroupreply           WHERE groupname = 
'dynamic'           ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  
Authentication may fail because of this.
++[pap] returns noop
ERROR: No authenticate method (Auth-Type) found for the request: 
Rejecting the user
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> bsemene
  attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 138 to 10.1.8.4 port 44065
Waking up in 4.9 seconds.
Cleaning up request 0 ID 138 with timestamp +4
Ready to process requests.

Here are the (test) DB datas (sorry for the layout) :

mysql> SELECT * FROM radusergroup;
+----------+-----------+----------+
| username | groupname | priority |
+----------+-----------+----------+
| bsemene  | dynamic   |        1 |
+----------+-----------+----------+
1 row in set (0.02 sec)

mysql> SELECT * FROM radcheck;
+----+----------+--------------------+----+-------+
| id | username | attribute          | op | value |
+----+----------+--------------------+----+-------+
|  1 | bsemene  | Cleartext-Password | == | test  |
+----+----------+--------------------+----+-------+
1 row in set (0.00 sec)

mysql> SELECT * FROM radreply;
Empty set (0.00 sec)

mysql> SELECT * FROM radgroupreply;
+----+-----------+------------+----+-------+
| id | groupname | attribute  | op | value |
+----+-----------+------------+----+-------+
|  1 | dynamic   | Framed-MTU | := | 1500  |
+----+-----------+------------+----+-------+
1 row in set (0.02 sec)

Here is the default site config :

# cat sites-available/default | grep -v "^[[:space:]]*#" | grep -v 
"^$"                                                                                                       
[root@radius]
authorize {
         preprocess
         chap
         mschap
         digest
         suffix
         eap {
                 ok = return
         }
         files
         sql
         expiration
         logintime
         pap
}
authenticate {
         Auth-Type PAP {
                 pap
         }
         Auth-Type CHAP {
                 chap
         }
         Auth-Type MS-CHAP {
                 mschap
         }
         digest
         unix
         eap
}
preacct {
         preprocess
         acct_unique
         suffix
         files
}
accounting {
         detail
         unix
         radutmp
         sql
         exec
         attr_filter.accounting_response
}
session {
         radutmp
}
post-auth {
         exec
         Post-Auth-Type REJECT {
                 attr_filter.access_reject
         }
}
pre-proxy {
}
post-proxy {
         eap
}

And finally the service loading output :

Starting radiusd.
FreeRADIUS Version 2.1.10, for host i386-portbld-freebsd8.0, built on 
Jun 28 2011 at 16:08:13
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file 
/usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file 
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/sql.conf
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file 
/usr/local/etc/raddb/sites-enabled/control-socket
main {
         user = "freeradius"
         group = "freeradius"
         allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
         prefix = "/usr/local"
         localstatedir = "/var"
         logdir = "/var/log"
         libdir = "/usr/local/lib/freeradius-2.1.10"
         radacctdir = "/var/log/radacct"
         hostname_lookups = no
         max_request_time = 30
         cleanup_delay = 5
         max_requests = 1024
         pidfile = "/var/run/radiusd/radiusd.pid"
         checkrad = "/usr/local/sbin/checkrad"
         debug_level = 0
         proxy_requests = yes
  log {
         stripped_names = no
         auth = no
         auth_badpass = no
         auth_goodpass = no
  }
  security {
         max_attributes = 200
         reject_delay = 1
         status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
         retry_delay = 5
         retry_count = 3
         default_fallback = no
         dead_time = 120
         wake_all_if_all_dead = no
  }
  home_server localhost {
         ipaddr = 127.0.0.1
         port = 1812
         type = "auth"
         secret = "testing123"
         response_window = 20
         max_outstanding = 65536
         require_message_authenticator = yes
         zombie_period = 40
         status_check = "status-server"
         ping_interval = 30
         check_interval = 30
         num_answers_to_alive = 3
         num_pings_to_alive = 3
         revive_interval = 120
         status_check_timeout = 4
         irt = 2
         mrt = 16
         mrc = 5
         mrd = 30
  }
  home_server_pool my_auth_failover {
         type = fail-over
         home_server = localhost
  }
  realm example.com {
         auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
radiusd: #### Loading Clients ####
  client localhost {
         ipaddr = 127.0.0.1
         require_message_authenticator = no
         secret = "testing123"
         nastype = "other"
  }
  client jail {
         ipaddr = 10.1.8.4
         require_message_authenticator = no
         secret = "password for jail client"
         nastype = "other"
  }
  client WAP1 {
         ipaddr = 10.1.8.127
         require_message_authenticator = no
         secret = "password for remote client"
         nastype = "other"
  }
radiusd: #### Instantiating modules ####
  instantiate {
  Module: Linked to module rlm_exec
  Module: Instantiating module "exec" from file 
/usr/local/etc/raddb/modules/exec
   exec {
         wait = no
         input_pairs = "request"
         shell_escape = yes
   }
  Module: Linked to module rlm_expr
  Module: Instantiating module "expr" from file 
/usr/local/etc/raddb/modules/expr
  Module: Linked to module rlm_expiration
  Module: Instantiating module "expiration" from file 
/usr/local/etc/raddb/modules/expiration
   expiration {
         reply-message = "Password Has Expired  "
   }
  Module: Linked to module rlm_logintime
  Module: Instantiating module "logintime" from file 
/usr/local/etc/raddb/modules/logintime
   logintime {
         reply-message = "You are calling outside your allowed timespan  "
         minimum-timeout = 60
   }
  }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file 
/usr/local/etc/raddb/sites-enabled/inner-tunnel
  modules {
  Module: Checking authenticate {...} for more modules to load
  Module: Linked to module rlm_pap
  Module: Instantiating module "pap" from file 
/usr/local/etc/raddb/modules/pap
   pap {
         encryption_scheme = "auto"
         auto_header = no
   }
  Module: Linked to module rlm_chap
  Module: Instantiating module "chap" from file 
/usr/local/etc/raddb/modules/chap
  Module: Linked to module rlm_mschap
  Module: Instantiating module "mschap" from file 
/usr/local/etc/raddb/modules/mschap
   mschap {
         use_mppe = yes
         require_encryption = no
         require_strong = no
         with_ntdomain_hack = no
   }
  Module: Linked to module rlm_unix
  Module: Instantiating module "unix" from file 
/usr/local/etc/raddb/modules/unix
   unix {
         radwtmp = "/var/log/radwtmp"
   }
  Module: Linked to module rlm_eap
  Module: Instantiating module "eap" from file 
/usr/local/etc/raddb/eap.conf
   eap {
         default_eap_type = "md5"
         timer_expire = 60
         ignore_unknown_eap_types = no
         cisco_accounting_username_bug = no
         max_sessions = 4096
   }
  Module: Linked to sub-module rlm_eap_md5
  Module: Instantiating eap-md5
  Module: Linked to sub-module rlm_eap_leap
  Module: Instantiating eap-leap
  Module: Linked to sub-module rlm_eap_gtc
  Module: Instantiating eap-gtc
    gtc {
         challenge = "Password: "
         auth_type = "PAP"
    }
  Module: Linked to sub-module rlm_eap_tls
  Module: Instantiating eap-tls
    tls {
         rsa_key_exchange = no
         dh_key_exchange = yes
         rsa_key_length = 512
         dh_key_length = 512
         verify_depth = 0
         CA_path = "/etc/ssl/certs"
         pem_file_type = yes
         private_key_file = "/etc/ssl/certs/server.pem"
         certificate_file = "/etc/ssl/certs/server.pem"
         CA_file = "/etc/ssl/certs/ca.pem"
         private_key_password = "password"
         dh_file = "/etc/ssl/certs/dh"
         random_file = "/etc/ssl/certs/random"
         fragment_size = 1024
         include_length = yes
         check_crl = no
         cipher_list = "DEFAULT"
         make_cert_command = "/etc/ssl/certs/bootstrap"
     cache {
         enable = no
         lifetime = 24
         max_entries = 255
     }
     verify {
     }
    }
  Module: Linked to sub-module rlm_eap_ttls
  Module: Instantiating eap-ttls
    ttls {
         default_eap_type = "md5"
         copy_request_to_tunnel = no
         use_tunneled_reply = no
         virtual_server = "inner-tunnel"
         include_length = yes
    }
  Module: Linked to sub-module rlm_eap_peap
  Module: Instantiating eap-peap
    peap {
         default_eap_type = "mschapv2"
         copy_request_to_tunnel = no
         use_tunneled_reply = no
         proxy_tunneled_request_as_eap = yes
         virtual_server = "inner-tunnel"
    }
  Module: Linked to sub-module rlm_eap_mschapv2
  Module: Instantiating eap-mschapv2
    mschapv2 {
         with_ntdomain_hack = no
    }
  Module: Checking authorize {...} for more modules to load
  Module: Linked to module rlm_realm
  Module: Instantiating module "suffix" from file 
/usr/local/etc/raddb/modules/realm
   realm suffix {
         format = "suffix"
         delimiter = "@"
         ignore_default = no
         ignore_null = no
   }
  Module: Linked to module rlm_files
  Module: Instantiating module "files" from file 
/usr/local/etc/raddb/modules/files
   files {
         usersfile = "/usr/local/etc/raddb/users"
         acctusersfile = "/usr/local/etc/raddb/acct_users"
         preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
         compat = "no"
   }
  Module: Checking session {...} for more modules to load
  Module: Linked to module rlm_radutmp
  Module: Instantiating module "radutmp" from file 
/usr/local/etc/raddb/modules/radutmp
   radutmp {
         filename = "/var/log/radutmp"
         username = "%{User-Name}"
         case_sensitive = yes
         check_with_nas = yes
         perm = 384
         callerid = yes
   }
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  Module: Linked to module rlm_attr_filter
  Module: Instantiating module "attr_filter.access_reject" from file 
/usr/local/etc/raddb/modules/attr_filter
   attr_filter attr_filter.access_reject {
         attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
         key = "%{User-Name}"
   }
  } # modules
} # server
server { # from file /usr/local/etc/raddb/radiusd.conf
  modules {
  Module: Checking authenticate {...} for more modules to load
  Module: Linked to module rlm_digest
  Module: Instantiating module "digest" from file 
/usr/local/etc/raddb/modules/digest
  Module: Checking authorize {...} for more modules to load
  Module: Linked to module rlm_preprocess
  Module: Instantiating module "preprocess" from file 
/usr/local/etc/raddb/modules/preprocess
   preprocess {
         huntgroups = "/usr/local/etc/raddb/huntgroups"
         hints = "/usr/local/etc/raddb/hints"
         with_ascend_hack = no
         ascend_channels_per_line = 23
         with_ntdomain_hack = no
         with_specialix_jetstream_hack = no
         with_cisco_vsa_hack = no
         with_alvarion_vsa_hack = no
   }
  Module: Linked to module rlm_sql
  Module: Instantiating module "sql" from file 
/usr/local/etc/raddb/sql.conf
   sql {
         driver = "rlm_sql_mysql"
         server = "ip.of.SQL.server"
         port = ""
         login = "username"
         password = "password"
         radius_db = "dbname"
         read_groups = yes
         sqltrace = no
         sqltracefile = "/var/log/sqltrace.sql"
         readclients = no
         deletestalesessions = yes
         num_sql_socks = 5
         lifetime = 0
         max_queries = 0
         sql_user_name = 
"%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
         default_user_profile = ""
         nas_query = "SELECT id, nasname, shortname, type, secret, 
server FROM nas"
         authorize_check_query = "SELECT id, username, attribute, value, 
op          FROM radcheck          WHERE username = BINARY 
'%{SQL-User-Name}'          ORDER BY id"
         authorize_reply_query = "SELECT id, username, attribute, value, 
op          FROM radreply          WHERE username = BINARY 
'%{SQL-User-Name}'          ORDER BY id"
         authorize_group_check_query = "SELECT id, groupname, 
attribute,           Value, op           FROM radgroupcheck           
WHERE groupname = '%{Sql-Group}'           ORDER BY id"
         authorize_group_reply_query = "SELECT id, groupname, 
attribute,           value, op           FROM radgroupreply           
WHERE groupname = '%{Sql-Group}'           ORDER BY id"
         accounting_onoff_query = "          UPDATE radacct           
SET              acctstoptime       =  '%S',              
acctsessiontime    =  unix_timestamp('%S') -
         accounting_update_query = "           UPDATE radacct           
SET              framedipaddress = '%{Framed-IP-Address}',              
acctsessiontime     = '%{Acct-Session-Time}',
         accounting_update_query_alt = "           INSERT INTO 
radacct             (acctsessionid,    acctuniqueid,      
username,              realm,            nasipaddress,      nasportid,
         accounting_start_query = "           INSERT INTO 
radacct             (acctsessionid,    acctuniqueid,     
username,              realm,            nasipaddress,     
nasportid,              n
         accounting_start_query_alt = "           UPDATE radacct 
SET              acctstarttime     = '%S',              
acctstartdelay    = '%{%{Acct-Delay-Time}:-0}',              
connectinfo_start
         accounting_stop_query = "           UPDATE radacct 
SET              acctstoptime       = '%S',              
acctsessiontime    = '%{Acct-Session-Time}',              
acctinputoctets    = '%{
         accounting_stop_query_alt = "           INSERT INTO 
radacct             (acctsessionid, acctuniqueid, username,              
realm, nasipaddress, nasportid,              nasporttype, acctsta
         group_membership_query = "SELECT groupname          FROM 
radusergroup          WHERE username = BINARY 
'%{SQL-User-Name}'          ORDER BY priority"
         connect_failure_retry_delay = 60
         simul_count_query = ""
         simul_verify_query = "SELECT radacctid, acctsessionid, 
username,                                nasipaddress, nasportid, 
framedipaddress,                                callingstationid, fra
         postauth_query = "INSERT INTO 
radpostauth                           (username, pass, reply, 
authdate)                           VALUES (                           
'%{User-Name}',
         safe-characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and 
linked
rlm_sql (sql): Attempting to connect to 
radius@mysql.it.cyanide-studio.com:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
  Module: Checking preacct {...} for more modules to load
  Module: Linked to module rlm_acct_unique
  Module: Instantiating module "acct_unique" from file 
/usr/local/etc/raddb/modules/acct_unique
   acct_unique {
         key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
   }
  Module: Checking accounting {...} for more modules to load
  Module: Linked to module rlm_detail
  Module: Instantiating module "detail" from file 
/usr/local/etc/raddb/modules/detail
   detail {
         detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
         header = "%t"
         detailperm = 384
         dirperm = 493
         locking = no
         log_packet_header = no
   }
  Module: Instantiating module "attr_filter.accounting_response" from 
file /usr/local/etc/raddb/modules/attr_filter
   attr_filter attr_filter.accounting_response {
         attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
         key = "%{User-Name}"
   }
  Module: Checking session {...} for more modules to load
  Module: Checking post-proxy {...} for more modules to load
  Module: Checking post-auth {...} for more modules to load
  } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
         type = "auth"
         ipaddr = *
         port = 0
}
listen {
         type = "acct"
         ipaddr = *
         port = 0
}
listen {
         type = "control"
  listen {
         socket = "/var/run/radiusd/radiusd.sock"
  }
}
listen {
         type = "auth"
         ipaddr = 127.0.0.1
         port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 10.1.8.4 port 18120 as server 
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.

-- 

Bastien Semene
Administrateur Réseau&  Système

Cyanide Studio - FRANCE

-- 

If you think experts are expensive,
wait to see what amateurs will cost you
--
Bastien Semene
Administrateur Réseau&  Système

Cyanide Studio - FRANCE

Bastien Semene

Sallee, Stephen (Jake)

Bastien Semene

tags

participants (2)