RE: Auth-Type fail

6 Jul 2011

      ...
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
This is probably your culprit.  Do you have the SQL module in your authorize and authenticate sections of your config?

Jake Sallee
Godfather of Bandwidth
System Engineer
University of Mary Hardin-Baylor
900 College St.
Belton, Texas
76513
Fone: 254-295-4658
Phax: 254-295-4221

From: freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org] On Behalf Of Bastien Semene
Sent: Wednesday, July 06, 2011 8:27 AM
To: freeradius-users@lists.freeradius.org
Subject: Auth-Type fail

Hi list,

I have problem authenticating users against (My)SQL.
Freeradius is running on a FreeBSD 8.0-STABLE and is on version 2.1.10.

It is a fresh install that I made work with the default file authentication.
When I connect the SQL backend, it doesn't work.
I followed the instructions on the FreeRADIUS wiki : http://wiki.freeradius.org/SQl_HOWTO

The SQL module is correctly loaded and it returns an OK during authentication.
The queries are well formed and the results should be ok

What I don't understand is why sql module returns OK, and the authentication is rejected. In my mind, an OK from the SQL module at this step means it has authenticated the user.
Am I misunderstanding ?

The debug output and relevant configuration directives are below.

P.S. : 10.1.8.4 is the IP of the server, I'm running radtest commands from this host (I can't use 127.0.0.1 because of how network currently works in jails on FreeBSD).

Here is the output of the radtest command :

# radtest bsemene test 10.1.8.4 0 "password for jail client"
Sending Access-Request of id 214 to 10.1.8.4 port 1812
        User-Name = "bsemene"
        User-Password = "test"
        NAS-IP-Address = 10.1.8.4
        NAS-Port = 0
rad_recv: Access-Reject packet from host 10.1.8.4 port 1812, id=214, length=20

Here is the debug output during authentication :

rad_recv: Access-Request packet from host 10.1.8.4 port 44065, id=138, length=59
        User-Name = "bsemene"
        User-Password = "test"
        NAS-IP-Address = 10.1.8.4
        NAS-Port = 0
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "bsemene", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] No EAP-Message, not doing EAP
++[eap] returns noop
++[files] returns noop
[sql]   expand: %{Stripped-User-Name} ->
[sql]   ... expanding second conditional
[sql]   expand: %{User-Name} -> bsemene
[sql]   expand: %{%{User-Name}:-DEFAULT} -> bsemene
[sql]   expand: %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} -> bsemene
[sql] sql_set_user escaped user --> 'bsemene'
rlm_sql (sql): Reserving sql socket id: 4
[sql]   expand: SELECT id, username, attribute, value, op          FROM radcheck          WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY id -> SELECT id, username, attribute, value, opFROM radcheck          WHERE username = BINARY 'bsemene'          ORDER BY id
[sql]   expand: SELECT groupname          FROM radusergroup          WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY priority -> SELECT groupname          FROM radusergroup          WHEe = BINARY 'bsemene'          ORDER BY priority
[sql]   expand: SELECT id, groupname, attribute,           Value, op           FROM radgroupcheck           WHERE groupname = '%{Sql-Group}'           ORDER BY id -> SELECT id, groupname, attribute, Value, op           FROM radgroupcheck           WHERE groupname = 'dynamic'           ORDER BY id
[sql] User found in group dynamic
[sql]   expand: SELECT id, groupname, attribute,           value, op           FROM radgroupreply           WHERE groupname = '%{Sql-Group}'           ORDER BY id -> SELECT id, groupname, attribute, value, op           FROM radgroupreply           WHERE groupname = 'dynamic'           ORDER BY id
rlm_sql (sql): Released sql socket id: 4
++[sql] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING! No "known good" password found for the user.  Authentication may fail because of this.
++[pap] returns noop
ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject]     expand: %{User-Name} -> bsemene
 attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 138 to 10.1.8.4 port 44065
Waking up in 4.9 seconds.
Cleaning up request 0 ID 138 with timestamp +4
Ready to process requests.

Here are the (test) DB datas (sorry for the layout) :

mysql> SELECT * FROM radusergroup;
+----------+-----------+----------+
| username | groupname | priority |
+----------+-----------+----------+
| bsemene  | dynamic   |        1 |
+----------+-----------+----------+
1 row in set (0.02 sec)

mysql> SELECT * FROM radcheck;
+----+----------+--------------------+----+-------+
| id | username | attribute          | op | value |
+----+----------+--------------------+----+-------+
|  1 | bsemene  | Cleartext-Password | == | test  |
+----+----------+--------------------+----+-------+
1 row in set (0.00 sec)

mysql> SELECT * FROM radreply;
Empty set (0.00 sec)

mysql> SELECT * FROM radgroupreply;
+----+-----------+------------+----+-------+
| id | groupname | attribute  | op | value |
+----+-----------+------------+----+-------+
|  1 | dynamic   | Framed-MTU | := | 1500  |
+----+-----------+------------+----+-------+
1 row in set (0.02 sec)

Here is the default site config :

# cat sites-available/default | grep -v "^[[:space:]]*#" | grep -v "^$"                                                                                                       [root@radius]
authorize {
        preprocess
        chap
        mschap
        digest
        suffix
        eap {
                ok = return
        }
        files
        sql
        expiration
        logintime
        pap
}
authenticate {
        Auth-Type PAP {
                pap
        }
        Auth-Type CHAP {
                chap
        }
        Auth-Type MS-CHAP {
                mschap
        }
        digest
        unix
        eap
}
preacct {
        preprocess
        acct_unique
        suffix
        files
}
accounting {
        detail
        unix
        radutmp
        sql
        exec
        attr_filter.accounting_response
}
session {
        radutmp
}
post-auth {
        exec
        Post-Auth-Type REJECT {
                attr_filter.access_reject
        }
}
pre-proxy {
}
post-proxy {
        eap
}

And finally the service loading output :

Starting radiusd.
FreeRADIUS Version 2.1.10, for host i386-portbld-freebsd8.0, built on Jun 28 2011 at 16:08:13
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/cui
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/dynamic_clients
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/ntlm_auth
including configuration file /usr/local/etc/raddb/modules/opendirectory
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/sql.conf
including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/control-socket
main {
        user = "freeradius"
        group = "freeradius"
        allow_core_dumps = no
}
including dictionary file /usr/local/etc/raddb/dictionary
main {
        prefix = "/usr/local"
        localstatedir = "/var"
        logdir = "/var/log"
        libdir = "/usr/local/lib/freeradius-2.1.10"
        radacctdir = "/var/log/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = yes
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        nastype = "other"
 }
 client jail {
        ipaddr = 10.1.8.4
        require_message_authenticator = no
        secret = "password for jail client"
        nastype = "other"
 }
 client WAP1 {
        ipaddr = 10.1.8.127
        require_message_authenticator = no
        secret = "password for remote client"
        nastype = "other"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr
 Module: Linked to module rlm_expiration
 Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap
 Module: Linked to module rlm_mschap
 Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix
  unix {
        radwtmp = "/var/log/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating module "eap" from file /usr/local/etc/raddb/eap.conf
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 4096
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        CA_path = "/etc/ssl/certs"
        pem_file_type = yes
        private_key_file = "/etc/ssl/certs/server.pem"
        certificate_file = "/etc/ssl/certs/server.pem"
        CA_file = "/etc/ssl/certs/ca.pem"
        private_key_password = "password"
        dh_file = "/etc/ssl/certs/dh"
        random_file = "/etc/ssl/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/etc/ssl/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files
  files {
        usersfile = "/usr/local/etc/raddb/users"
        acctusersfile = "/usr/local/etc/raddb/acct_users"
        preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp
  radutmp {
        filename = "/var/log/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.access_reject {
        attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server { # from file /usr/local/etc/raddb/radiusd.conf
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_digest
 Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/huntgroups"
        hints = "/usr/local/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Linked to module rlm_sql
 Module: Instantiating module "sql" from file /usr/local/etc/raddb/sql.conf
  sql {
        driver = "rlm_sql_mysql"
        server = "ip.of.SQL.server"
        port = ""
        login = "username"
        password = "password"
        radius_db = "dbname"
        read_groups = yes
        sqltrace = no
        sqltracefile = "/var/log/sqltrace.sql"
        readclients = no
        deletestalesessions = yes
        num_sql_socks = 5
        lifetime = 0
        max_queries = 0
        sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
        default_user_profile = ""
        nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op          FROM radcheck          WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op          FROM radreply          WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute,           Value, op           FROM radgroupcheck           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute,           value, op           FROM radgroupreply           WHERE groupname = '%{Sql-Group}'           ORDER BY id"
        accounting_onoff_query = "          UPDATE radacct           SET              acctstoptime       =  '%S',              acctsessiontime    =  unix_timestamp('%S') -
        accounting_update_query = "           UPDATE radacct           SET              framedipaddress = '%{Framed-IP-Address}',              acctsessiontime     = '%{Acct-Session-Time}',
        accounting_update_query_alt = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,      username,              realm,            nasipaddress,      nasportid,
        accounting_start_query = "           INSERT INTO radacct             (acctsessionid,    acctuniqueid,     username,              realm,            nasipaddress,     nasportid,              n
        accounting_start_query_alt = "           UPDATE radacct SET              acctstarttime     = '%S',              acctstartdelay    = '%{%{Acct-Delay-Time}:-0}',              connectinfo_start
        accounting_stop_query = "           UPDATE radacct SET              acctstoptime       = '%S',              acctsessiontime    = '%{Acct-Session-Time}',              acctinputoctets    = '%{
        accounting_stop_query_alt = "           INSERT INTO radacct             (acctsessionid, acctuniqueid, username,              realm, nasipaddress, nasportid,              nasporttype, acctsta
        group_membership_query = "SELECT groupname          FROM radusergroup          WHERE username = BINARY '%{SQL-User-Name}'          ORDER BY priority"
        connect_failure_retry_delay = 60
        simul_count_query = ""
        simul_verify_query = "SELECT radacctid, acctsessionid, username,                                nasipaddress, nasportid, framedipaddress,                                callingstationid, fra
        postauth_query = "INSERT INTO radpostauth                           (username, pass, reply, authdate)                           VALUES (                           '%{User-Name}',
        safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_<mailto:%22INSERT%20INTO%20radpostauth                          %20(username,%20pass,%20reply,%20authdate)                          %20VALUES%20(                          %20'%25%7bUser-Name%7d',%20%0b       %20safe-characters%20=%20%22@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_>: /"
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius@mysql.it.cyanide-studio.com:/radius<mailto:radius@mysql.it.cyanide-studio.com:/radius>
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail
  detail {
        detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter
  attr_filter attr_filter.accounting_response {
        attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
        key = "%{User-Name}"
  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "control"
 listen {
        socket = "/var/run/radiusd/radiusd.sock"
 }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 10.1.8.4 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.

--

Bastien Semene
Administrateur Réseau&  Système

Cyanide Studio - FRANCE

--

If you think experts are expensive,

wait to see what amateurs will cost you

--

Bastien Semene

Administrateur Réseau & Système

Cyanide Studio - FRANCE

RE: Auth-Type fail

Sallee, Stephen (Jake)