Hello, I have been digging through various parts of the documentation (for unlang), and the mail archive – but without luck. I have a firewall, that sends a SMS message, to the user attempting to gain access. The request is going through Freeradius – and Samba. This works, but getting the SMS fails, since the firewall is looking for the attribute “mobile” in the response from the radius server. The solution, I thought, was adding the attribute in the post-auth area in my default site file. update { &reply:User-Name := 'Hej' &reply:mobile := 'Trala' } I have also added the “mobile” attribute to the “Dictionary” file: ATTRIBUTE mobile 3000 string However, when performing an authentication, the reply does not contain the new attribute. The “User-Name” attribute is changed, so the update is executed. (Just added for debug purposes) What am I missing? It's probably something obvious, but I’ve gone through so many files, that by now I have probably confused myself. Thank you in advance, Best regards, Andy FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/always including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client router { ipaddr = 192.168.221.100 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = ntlm_auth # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=SRO.LOCAL --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=SRO.LOCAL --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}" passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth' # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 53043 Listening on proxy address :: port 54308 Ready to process requests (0) Received Access-Request Id 177 from 192.168.221.100:55482 to 192.168.221.2:1812 length 113 (0) EAP-Message = 0x02d000080168686d (0) User-Name = "hhm" (0) Framed-MTU = 1400 (0) Attr-26.890.4 = 0x54495f417574684d6574686f64 (0) Attr-26.890.44 = 0x7a7978656c2d717569636b736563 (0) Message-Authenticator = 0x71601b7cd418f17660267e0803b78ce7 (0) Proxy-State = 0x313437 (0) NAS-IP-Address = 127.0.0.1 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "hhm", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 208 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 209 length 22 (0) eap: EAP session adding &reply:State = 0x2e5033f12e8137ec (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 177 from 192.168.221.2:1812 to 192.168.221.100:55482 length 85 (0) EAP-Message = 0x01d100160410fa5027c677b71e3d830f6e2189a48411 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x2e5033f12e8137eca3835703256a16b7 (0) Proxy-State = 0x313437 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 187 from 192.168.221.100:55482 to 192.168.221.2:1812 length 128 (1) EAP-Message = 0x02d10006031a (1) User-Name = "hhm" (1) Framed-MTU = 1400 (1) State = 0x2e5033f12e8137eca3835703256a16b7 (1) Attr-26.890.4 = 0x54495f417574684d6574686f64 (1) Attr-26.890.44 = 0x7a7978656c2d717569636b736563 (1) Message-Authenticator = 0x04c1a6e87f1dda4ee7d7ea7095a15ee0 (1) Proxy-State = 0x3435 (1) NAS-IP-Address = 127.0.0.1 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "hhm", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 209 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x2e5033f12e8137ec (1) eap: Finished EAP session with state 0x2e5033f12e8137ec (1) eap: Previous EAP request found for state 0x2e5033f12e8137ec, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type MSCHAPv2 (26) (1) eap: Calling submodule eap_mschapv2 to process data (1) eap_mschapv2: Issuing Challenge (1) eap: Sending EAP Request (code 1) ID 210 length 43 (1) eap: EAP session adding &reply:State = 0x2e5033f12f8229ec (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 187 from 192.168.221.2:1812 to 192.168.221.100:55482 length 105 (1) EAP-Message = 0x01d2002b1a01d200261059dd130655aac4be2f13f87882ecaeb6667265657261646975732d332e302e3236 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x2e5033f12f8229eca3835703256a16b7 (1) Proxy-State = 0x3435 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 21 from 192.168.221.100:55482 to 192.168.221.2:1812 length 185 (2) EAP-Message = 0x02d2003e1a02d2003931a671fcd01b782c3f048cbb4d5788ca0f0000000000000000507ee03bedda519dbfbaddca5dce72513d201b61f518b6280068686d (2) User-Name = "hhm" (2) Framed-MTU = 1400 (2) State = 0x2e5033f12f8229eca3835703256a16b7 (2) Attr-26.890.4 = 0x54495f417574684d6574686f64 (2) Attr-26.890.44 = 0x7a7978656c2d717569636b736563 (2) Message-Authenticator = 0x76d68ca214874beb9063d270aff78152 (2) Proxy-State = 0x323334 (2) NAS-IP-Address = 127.0.0.1 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "hhm", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 210 length 62 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop Not doing PAP as Auth-Type is already set. (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x2e5033f12f8229ec (2) eap: Finished EAP session with state 0x2e5033f12f8229ec (2) eap: Previous EAP request found for state 0x2e5033f12f8229ec, released from the list (2) eap: Peer sent packet with method EAP MSCHAPv2 (26) (2) eap: Calling submodule eap_mschapv2 to process data (2) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) eap_mschapv2: authenticate { (2) mschap: Creating challenge hash with username: hhm (2) mschap: Client is using MS-CHAPv2 (2) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=SRO.LOCAL --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (2) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (2) mschap: --> --username=hhm (2) mschap: Creating challenge hash with username: hhm (2) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (2) mschap: --> --challenge=8dc2156cd9e7a497 (2) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (2) mschap: --> --nt-response=507ee03bedda519dbfbaddca5dce72513d201b61f518b628 INFO: Current debug levels: all: 10 tdb: 10 printdrivers: 10 lanman: 10 smb: 10 rpc_parse: 10 rpc_srv: 10 rpc_cli: 10 passdb: 10 sam: 10 auth: 10 winbind: 10 vfs: 10 idmap: 10 quota: 10 acls: 10 locking: 10 msdfs: 10 dmapi: 10 registry: 10 scavenger: 10 dns: 10 ldb: 10 tevent: 10 auth_audit: 10 auth_json_audit: 3 kerberos: 10 drs_repl: 10 smb2: 10 smb2_credits: 10 dsdb_audit: 10 dsdb_json_audit: 10 dsdb_password_audit: 10 dsdb_password_json_audit: 10 dsdb_transaction_audit: 10 dsdb_transaction_json_audit: 10 dsdb_group_audit: 10 dsdb_group_json_audit: 10 doing parameter tls enabled = no doing parameter ldap server require strong auth = no pm_process() returned Yes lp_servicenumber: couldn't find homes added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0 lp_load_ex: refreshing parameters Freeing parametrics: Initialising global parameters rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[global]" doing parameter dns forwarder = 8.8.8.8 doing parameter dns forwarder = 8.8.8.8, 8.8.4.4 doing parameter netbios name = DC1 doing parameter realm = SRO.LOCAL doing parameter server role = active directory domain controller doing parameter workgroup = SRO doing parameter winbind use default domain = yes doing parameter password server = dc1.sro.local doing parameter ntlm auth = yes doing parameter log level = 10 auth_audit:10 auth_json_audit:3 INFO: Current debug levels: all: 10 tdb: 10 printdrivers: 10 lanman: 10 smb: 10 rpc_parse: 10 rpc_srv: 10 rpc_cli: 10 passdb: 10 sam: 10 auth: 10 winbind: 10 vfs: 10 idmap: 10 quota: 10 acls: 10 locking: 10 msdfs: 10 dmapi: 10 registry: 10 scavenger: 10 dns: 10 ldb: 10 tevent: 10 auth_audit: 10 auth_json_audit: 3 kerberos: 10 drs_repl: 10 smb2: 10 smb2_credits: 10 dsdb_audit: 10 dsdb_json_audit: 10 dsdb_password_audit: 10 dsdb_password_json_audit: 10 dsdb_transaction_audit: 10 dsdb_transaction_json_audit: 10 dsdb_group_audit: 10 dsdb_group_json_audit: 10 doing parameter tls enabled = no doing parameter ldap server require strong auth = no pm_process() returned Yes lp_servicenumber: couldn't find homes added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0 lp_load_ex: refreshing parameters Freeing parametrics: Initialising global parameters rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[global]" doing parameter dns forwarder = 8.8.8.8 doing parameter dns forwarder = 8.8.8.8, 8.8.4.4 doing parameter netbios name = DC1 doing parameter realm = SRO.LOCAL doing parameter server role = active directory domain controller doing parameter workgroup = SRO doing parameter winbind use default domain = yes doing parameter password server = dc1.sro.local doing parameter ntlm auth = yes doing parameter log level = 10 auth_audit:10 auth_json_audit:3 INFO: Current debug levels: all: 10 tdb: 10 printdrivers: 10 lanman: 10 smb: 10 rpc_parse: 10 rpc_srv: 10 rpc_cli: 10 passdb: 10 sam: 10 auth: 10 winbind: 10 vfs: 10 idmap: 10 quota: 10 acls: 10 locking: 10 msdfs: 10 dmapi: 10 registry: 10 scavenger: 10 dns: 10 ldb: 10 tevent: 10 auth_audit: 10 auth_json_audit: 3 kerberos: 10 drs_repl: 10 smb2: 10 smb2_credits: 10 dsdb_audit: 10 dsdb_json_audit: 10 dsdb_password_audit: 10 dsdb_password_json_audit: 10 dsdb_transaction_audit: 10 dsdb_transaction_json_audit: 10 dsdb_group_audit: 10 dsdb_group_json_audit: 10 doing parameter tls enabled = no doing parameter ldap server require strong auth = no pm_process() returned Yes lp_servicenumber: couldn't find homes added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0 (2) mschap: Program returned code (0) and output 'NT_KEY: 67713BFEADAA0E22E40425063E2BBF11' (2) mschap: Adding MS-CHAPv2 MPPE keys (2) eap_mschapv2: [mschap] = ok (2) eap_mschapv2: } # authenticate = ok (2) eap_mschapv2: MSCHAP Success (2) eap: Sending EAP Request (code 1) ID 211 length 51 (2) eap: EAP session adding &reply:State = 0x2e5033f12c8329ec (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 21 from 192.168.221.2:1812 to 192.168.221.100:55482 length 114 (2) EAP-Message = 0x01d300331a03d2002e533d46384144414237444345413544373739463739443342334135343346464441374536303242323138 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x2e5033f12c8329eca3835703256a16b7 (2) Proxy-State = 0x323334 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 192.168.221.100:55482 to 192.168.221.2:1812 length 129 (3) EAP-Message = 0x02d300061a03 (3) User-Name = "hhm" (3) Framed-MTU = 1400 (3) State = 0x2e5033f12c8329eca3835703256a16b7 (3) Attr-26.890.4 = 0x54495f417574684d6574686f64 (3) Attr-26.890.44 = 0x7a7978656c2d717569636b736563 (3) Message-Authenticator = 0xdeaa91389275750915a80fb31ddb7439 (3) Proxy-State = 0x313738 (3) NAS-IP-Address = 127.0.0.1 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "hhm", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 211 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop Not doing PAP as Auth-Type is already set. (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x2e5033f12c8329ec (3) eap: Finished EAP session with state 0x2e5033f12c8329ec (3) eap: Previous EAP request found for state 0x2e5033f12c8329ec, released from the list (3) eap: Peer sent packet with method EAP MSCHAPv2 (26) (3) eap: Calling submodule eap_mschapv2 to process data (3) eap: Sending EAP Success (code 3) ID 211 length 4 (3) eap: Freeing handler (3) [eap] = ok (3) } # authenticate = ok (3) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (3) post-auth { (3) update { (3) &reply:User-Name := 'Hej' (3) &reply:mobile := 'Trala' (3) } # update = noop (3) } # post-auth = noop (3) Sent Access-Accept Id 3 from 192.168.221.2:1812 to 192.168.221.100:55482 length 162 (3) MS-MPPE-Encryption-Policy = Encryption-Allowed (3) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (3) MS-MPPE-Send-Key = 0x24c6e34024a77b82a803b8a12175eb1c (3) MS-MPPE-Recv-Key = 0x2db69aa6dca9e43312090f127639f7c2 (3) EAP-Message = 0x03d30004 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) User-Name := "Hej" (3) Proxy-State = 0x313738 (3) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 177 with timestamp +7 due to cleanup_delay was reached (1) Cleaning up request packet ID 187 with timestamp +7 due to cleanup_delay was reached (2) Cleaning up request packet ID 21 with timestamp +7 due to cleanup_delay was reached (3) Cleaning up request packet ID 3 with timestamp +7 due to cleanup_delay was reached Ready to process requests