Adding attribute to Access-Accept message

5 Oct 2023

      Hello,

I have been digging through various parts of the documentation (for unlang), and the mail archive – but without luck.

I have a firewall, that sends a SMS message, to the user attempting to gain access.

The request is going through Freeradius – and Samba.

This works, but getting the SMS fails, since the firewall is looking for the attribute “mobile” in the response from the radius server.

The solution, I thought, was adding the attribute in the post-auth area in my default site file.

update {
&reply:User-Name := 'Hej'
&reply:mobile := 'Trala'
}

I have also added the “mobile” attribute to the “Dictionary” file:

ATTRIBUTE       mobile                  3000    string

However, when performing an authentication, the reply does not contain the new attribute.
The “User-Name” attribute is changed, so the update is executed. (Just added for debug purposes)

What am I missing? It's probably something obvious, but I’ve gone through so many files, that by now I have probably confused myself.

Thank you in advance,

Best regards,

Andy

FreeRADIUS Version 3.0.26
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/always
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	postauth_client_lost = no
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client router {
 	ipaddr = 192.168.221.100
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = ntlm_auth
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "md5"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
  	format = "prefix"
  	delimiter = "!"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_exec
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/usr/bin/ntlm_auth --request-nt-key --domain=SRO.LOCAL --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
  	ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=SRO.LOCAL --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}"
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  instantiate {
  }
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	verify_depth = 0
   	ca_path = "/etc/freeradius/3.0/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
   	certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
   	ca_file = "/etc/ssl/certs/ca-certificates.crt"
   	private_key_password = <<< secret >>>
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	ca_path_reload_interval = 0
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	reject_unknown_intermediate_ca = no
   	ecdh_curve = ""
   	tls_max_version = "1.2"
   	tls_min_version = "1.2"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
 # Loading preacct {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
 # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 53043
Listening on proxy address :: port 54308
Ready to process requests
(0) Received Access-Request Id 177 from 192.168.221.100:55482 to 192.168.221.2:1812 length 113
(0)   EAP-Message = 0x02d000080168686d
(0)   User-Name = "hhm"
(0)   Framed-MTU = 1400
(0)   Attr-26.890.4 = 0x54495f417574684d6574686f64
(0)   Attr-26.890.44 = 0x7a7978656c2d717569636b736563
(0)   Message-Authenticator = 0x71601b7cd418f17660267e0803b78ce7
(0)   Proxy-State = 0x313437
(0)   NAS-IP-Address = 127.0.0.1
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "hhm", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 208 length 8
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 209 length 22
(0) eap: EAP session adding &reply:State = 0x2e5033f12e8137ec
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Sent Access-Challenge Id 177 from 192.168.221.2:1812 to 192.168.221.100:55482 length 85
(0)   EAP-Message = 0x01d100160410fa5027c677b71e3d830f6e2189a48411
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x2e5033f12e8137eca3835703256a16b7
(0)   Proxy-State = 0x313437
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 187 from 192.168.221.100:55482 to 192.168.221.2:1812 length 128
(1)   EAP-Message = 0x02d10006031a
(1)   User-Name = "hhm"
(1)   Framed-MTU = 1400
(1)   State = 0x2e5033f12e8137eca3835703256a16b7
(1)   Attr-26.890.4 = 0x54495f417574684d6574686f64
(1)   Attr-26.890.44 = 0x7a7978656c2d717569636b736563
(1)   Message-Authenticator = 0x04c1a6e87f1dda4ee7d7ea7095a15ee0
(1)   Proxy-State = 0x3435
(1)   NAS-IP-Address = 127.0.0.1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "hhm", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 209 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
Not doing PAP as Auth-Type is already set.
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x2e5033f12e8137ec
(1) eap: Finished EAP session with state 0x2e5033f12e8137ec
(1) eap: Previous EAP request found for state 0x2e5033f12e8137ec, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type MSCHAPv2 (26)
(1) eap: Calling submodule eap_mschapv2 to process data
(1) eap_mschapv2: Issuing Challenge
(1) eap: Sending EAP Request (code 1) ID 210 length 43
(1) eap: EAP session adding &reply:State = 0x2e5033f12f8229ec
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Sent Access-Challenge Id 187 from 192.168.221.2:1812 to 192.168.221.100:55482 length 105
(1)   EAP-Message = 0x01d2002b1a01d200261059dd130655aac4be2f13f87882ecaeb6667265657261646975732d332e302e3236
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x2e5033f12f8229eca3835703256a16b7
(1)   Proxy-State = 0x3435
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 21 from 192.168.221.100:55482 to 192.168.221.2:1812 length 185
(2)   EAP-Message = 0x02d2003e1a02d2003931a671fcd01b782c3f048cbb4d5788ca0f0000000000000000507ee03bedda519dbfbaddca5dce72513d201b61f518b6280068686d
(2)   User-Name = "hhm"
(2)   Framed-MTU = 1400
(2)   State = 0x2e5033f12f8229eca3835703256a16b7
(2)   Attr-26.890.4 = 0x54495f417574684d6574686f64
(2)   Attr-26.890.44 = 0x7a7978656c2d717569636b736563
(2)   Message-Authenticator = 0x76d68ca214874beb9063d270aff78152
(2)   Proxy-State = 0x323334
(2)   NAS-IP-Address = 127.0.0.1
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "hhm", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 210 length 62
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
Not doing PAP as Auth-Type is already set.
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x2e5033f12f8229ec
(2) eap: Finished EAP session with state 0x2e5033f12f8229ec
(2) eap: Previous EAP request found for state 0x2e5033f12f8229ec, released from the list
(2) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(2) eap: Calling submodule eap_mschapv2 to process data
(2) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) eap_mschapv2:   authenticate {
(2) mschap: Creating challenge hash with username: hhm
(2) mschap: Client is using MS-CHAPv2
(2) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=SRO.LOCAL --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}:
(2) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
(2) mschap:    --> --username=hhm
(2) mschap: Creating challenge hash with username: hhm
(2) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00}
(2) mschap:    --> --challenge=8dc2156cd9e7a497
(2) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00}
(2) mschap:    --> --nt-response=507ee03bedda519dbfbaddca5dce72513d201b61f518b628
INFO: Current debug levels:
  all: 10
  tdb: 10
  printdrivers: 10
  lanman: 10
  smb: 10
  rpc_parse: 10
  rpc_srv: 10
  rpc_cli: 10
  passdb: 10
  sam: 10
  auth: 10
  winbind: 10
  vfs: 10
  idmap: 10
  quota: 10
  acls: 10
  locking: 10
  msdfs: 10
  dmapi: 10
  registry: 10
  scavenger: 10
  dns: 10
  ldb: 10
  tevent: 10
  auth_audit: 10
  auth_json_audit: 3
  kerberos: 10
  drs_repl: 10
  smb2: 10
  smb2_credits: 10
  dsdb_audit: 10
  dsdb_json_audit: 10
  dsdb_password_audit: 10
  dsdb_password_json_audit: 10
  dsdb_transaction_audit: 10
  dsdb_transaction_json_audit: 10
  dsdb_group_audit: 10
  dsdb_group_json_audit: 10
doing parameter tls enabled = no
doing parameter ldap server require strong auth = no
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0
lp_load_ex: refreshing parameters
Freeing parametrics:
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[global]"
doing parameter dns forwarder = 8.8.8.8
doing parameter dns forwarder = 8.8.8.8, 8.8.4.4
doing parameter netbios name = DC1
doing parameter realm = SRO.LOCAL
doing parameter server role = active directory domain controller
doing parameter workgroup = SRO
doing parameter winbind use default domain = yes
doing parameter password server = dc1.sro.local
doing parameter ntlm auth = yes
doing parameter log level = 10 auth_audit:10 auth_json_audit:3
INFO: Current debug levels:
  all: 10
  tdb: 10
  printdrivers: 10
  lanman: 10
  smb: 10
  rpc_parse: 10
  rpc_srv: 10
  rpc_cli: 10
  passdb: 10
  sam: 10
  auth: 10
  winbind: 10
  vfs: 10
  idmap: 10
  quota: 10
  acls: 10
  locking: 10
  msdfs: 10
  dmapi: 10
  registry: 10
  scavenger: 10
  dns: 10
  ldb: 10
  tevent: 10
  auth_audit: 10
  auth_json_audit: 3
  kerberos: 10
  drs_repl: 10
  smb2: 10
  smb2_credits: 10
  dsdb_audit: 10
  dsdb_json_audit: 10
  dsdb_password_audit: 10
  dsdb_password_json_audit: 10
  dsdb_transaction_audit: 10
  dsdb_transaction_json_audit: 10
  dsdb_group_audit: 10
  dsdb_group_json_audit: 10
doing parameter tls enabled = no
doing parameter ldap server require strong auth = no
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0
lp_load_ex: refreshing parameters
Freeing parametrics:
Initialising global parameters
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[global]"
doing parameter dns forwarder = 8.8.8.8
doing parameter dns forwarder = 8.8.8.8, 8.8.4.4
doing parameter netbios name = DC1
doing parameter realm = SRO.LOCAL
doing parameter server role = active directory domain controller
doing parameter workgroup = SRO
doing parameter winbind use default domain = yes
doing parameter password server = dc1.sro.local
doing parameter ntlm auth = yes
doing parameter log level = 10 auth_audit:10 auth_json_audit:3
INFO: Current debug levels:
  all: 10
  tdb: 10
  printdrivers: 10
  lanman: 10
  smb: 10
  rpc_parse: 10
  rpc_srv: 10
  rpc_cli: 10
  passdb: 10
  sam: 10
  auth: 10
  winbind: 10
  vfs: 10
  idmap: 10
  quota: 10
  acls: 10
  locking: 10
  msdfs: 10
  dmapi: 10
  registry: 10
  scavenger: 10
  dns: 10
  ldb: 10
  tevent: 10
  auth_audit: 10
  auth_json_audit: 3
  kerberos: 10
  drs_repl: 10
  smb2: 10
  smb2_credits: 10
  dsdb_audit: 10
  dsdb_json_audit: 10
  dsdb_password_audit: 10
  dsdb_password_json_audit: 10
  dsdb_transaction_audit: 10
  dsdb_transaction_json_audit: 10
  dsdb_group_audit: 10
  dsdb_group_json_audit: 10
doing parameter tls enabled = no
doing parameter ldap server require strong auth = no
pm_process() returned Yes
lp_servicenumber: couldn't find homes
added interface ens32 ip=192.168.221.2 bcast=192.168.221.255 netmask=255.255.255.0
(2) mschap: Program returned code (0) and output 'NT_KEY: 67713BFEADAA0E22E40425063E2BBF11'
(2) mschap: Adding MS-CHAPv2 MPPE keys
(2) eap_mschapv2:     [mschap] = ok
(2) eap_mschapv2:   } # authenticate = ok
(2) eap_mschapv2: MSCHAP Success
(2) eap: Sending EAP Request (code 1) ID 211 length 51
(2) eap: EAP session adding &reply:State = 0x2e5033f12c8329ec
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Sent Access-Challenge Id 21 from 192.168.221.2:1812 to 192.168.221.100:55482 length 114
(2)   EAP-Message = 0x01d300331a03d2002e533d46384144414237444345413544373739463739443342334135343346464441374536303242323138
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x2e5033f12c8329eca3835703256a16b7
(2)   Proxy-State = 0x323334
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 3 from 192.168.221.100:55482 to 192.168.221.2:1812 length 129
(3)   EAP-Message = 0x02d300061a03
(3)   User-Name = "hhm"
(3)   Framed-MTU = 1400
(3)   State = 0x2e5033f12c8329eca3835703256a16b7
(3)   Attr-26.890.4 = 0x54495f417574684d6574686f64
(3)   Attr-26.890.44 = 0x7a7978656c2d717569636b736563
(3)   Message-Authenticator = 0xdeaa91389275750915a80fb31ddb7439
(3)   Proxy-State = 0x313738
(3)   NAS-IP-Address = 127.0.0.1
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "hhm", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 211 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
Not doing PAP as Auth-Type is already set.
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x2e5033f12c8329ec
(3) eap: Finished EAP session with state 0x2e5033f12c8329ec
(3) eap: Previous EAP request found for state 0x2e5033f12c8329ec, released from the list
(3) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(3) eap: Calling submodule eap_mschapv2 to process data
(3) eap: Sending EAP Success (code 3) ID 211 length 4
(3) eap: Freeing handler
(3)     [eap] = ok
(3)   } # authenticate = ok
(3) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(3)   post-auth {
(3)     update {
(3)       &reply:User-Name := 'Hej'
(3)       &reply:mobile := 'Trala'
(3)     } # update = noop
(3)   } # post-auth = noop
(3) Sent Access-Accept Id 3 from 192.168.221.2:1812 to 192.168.221.100:55482 length 162
(3)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(3)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(3)   MS-MPPE-Send-Key = 0x24c6e34024a77b82a803b8a12175eb1c
(3)   MS-MPPE-Recv-Key = 0x2db69aa6dca9e43312090f127639f7c2
(3)   EAP-Message = 0x03d30004
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   User-Name := "Hej"
(3)   Proxy-State = 0x313738
(3) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 177 with timestamp +7 due to cleanup_delay was reached
(1) Cleaning up request packet ID 187 with timestamp +7 due to cleanup_delay was reached
(2) Cleaning up request packet ID 21 with timestamp +7 due to cleanup_delay was reached
(3) Cleaning up request packet ID 3 with timestamp +7 due to cleanup_delay was reached
Ready to process requests

Adding attribute to Access-Accept message

Anders Sørensen