I have a working solution. For Alvarion to assign service profiles to subscribers through FreeRADIUS the Filter-Id attribute must be provided in the Access-Accept in the following format. Filter-Id = "SP=sp1:MSF=msf1;" Where sp1 is the name of the pre-configured service profile and msf1 is the name of the pre-configured multiple service flow profile. I can confirm that this format works with both the 4Motion and the BreezeMAX extreme product lines from Alvarion. Thanks to everyone for your assistance. -----Original Message----- From: Ryan Williams [mailto:ryan@integritynet.com.au] Sent: Friday, 13 May 2011 11:40 AM To: 'freeradius-users@lists.freeradius.org' Subject: Alvarion BreezeMAX & 4Motion Service Profiles Has anyone been able to get the Alvarion BreezeMAX to apply a service profile for a subscriber through radius? or has anyone been able to get debug logging out of the BreezeMAX perhaps via syslog? I believe I've got the service interfaces, service groups etc configured the same in both products. The BreezeMAX works if I disable RADIUS but doesn't work with the following radius reply. The following access accept works with the Alvarion 4Motion product but not with the BreezeMAX. Sending Access-Accept of id 13 to 10.12.15.50 port 49154 Session-Timeout = 3600 Termination-Action = RADIUS-Request Filter-Id = "SP1" EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}test@test.com.au" WiMAX-MSK = 0x18bffebb46ac2e95ee730b7ecc0eaa5eb4b586fe29e5113f97f1ab794b4405f9d77aaa432c bb91eb9e4d3ea7e65dded2bb765e18491c62530cf3edee80c644a1