No authenticate method (Auth-Type) configuration found
Hi all, I have got some problems when use freeradius. freeradius version: FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51 My system: Fedora core 4 Kernel version: 2.6.11-1.1369_FC4 When i test the radius server, I have add something into /usr/local/etc/raddb/users like this: test1 Auth-Type := Local, User-Password == "123456" User-Password =="123456", Service-Type=Framed-User, Framed-Protocol=PPP, Framed-IP-Address=192.168.121.99, Framed-IP-Netmask=255.255.252.0 Add this into clients.conf: client 192.168.121.43{ secret = mmmmmm shortname = remote nastype = other } Then start the freeradius server and use radtest to check this server: radtest test1 123456 192.168.121.49 0 mmmmmm 192.168.121.49 is my server's IP, My local machine IP address is 192.168.121.43. But, It always failed! Following is the client's information: Sending Access-Request of id 161 to 192.168.121.49:1812 User-Name = "test1" User-Password = "123456" NAS-IP-Address = freepp NAS-Port = 0 rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20 And radius server's debuf information: rad_recv: Access-Request packet from host 192.168.121.43:32768, id=161, length=57 User-Name = "test1" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 modcall: group authorize returns ok for request 2 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 2 for 1 seconds Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 161 to 192.168.121.43:32768 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 161 with timestamp 48d1f126 Nothing to do. Sleeping until we see a request. As you see, every time he told me "No authenticate method(Auth-Type) configuration found for the request......", I don't konw why? Could you please give me some help? Many Thanks! 2008-09-18 Jason Zhang
Hi Jason, I also have the same problem before. Change the User-Password to Cleartext-Password := "your password" in the users file. I hope it will work. SYED On Thu, Sep 18, 2008 at 8:15 AM, browan.jason <browan.jason@gmail.com>wrote:
Hi all, I have got some problems when use freeradius. freeradius version: FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51 My system: Fedora core 4 Kernel version: 2.6.11-1.1369_FC4
When i test the radius server, I have add something into /usr/local/etc/raddb/users like this: test1 Auth-Type := Local, User-Password == "123456" User-Password =="123456", Service-Type=Framed-User, Framed-Protocol=PPP, Framed-IP-Address=192.168.121.99, Framed-IP-Netmask=255.255.252.0 Add this into clients.conf: client 192.168.121.43{ secret = mmmmmm shortname = remote nastype = other }
Then start the freeradius server and use radtest to check this server:
radtest test1 123456 192.168.121.49 0 mmmmmm 192.168.121.49 is my server's IP, My local machine IP address is 192.168.121.43.
But, It always failed! Following is the client's information: Sending Access-Request of id 161 to 192.168.121.49:1812 User-Name = "test1" User-Password = "123456" NAS-IP-Address = freepp NAS-Port = 0 rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20
And radius server's debuf information: rad_recv: Access-Request packet from host 192.168.121.43:32768 , id=161, length=57 User-Name = "test1" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 *modcall: group authorize returns ok for request 2* * auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user * *auth: Failed to validate the user.* Delaying request 2 for 1 seconds Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 161 to 192.168.121.43:32768 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 161 with timestamp 48d1f126 Nothing to do. Sleeping until we see a request.
As you see, every time he told me "No authenticate method(Auth-Type) configuration found for the request......", I don't konw why? Could you please give me some help? Many Thanks! 2008-09-18 ------------------------------ Jason Zhang
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Dear Syed, Thank you very much. I have try the method as you say, but ,it seems to be the same error. modcall: group authorize returns ok for request 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. 2008-09-18 Jason 发件人： Syed Anwarul Hasan 发送时间： 2008-09-18 15:27:18 收件人： FreeRadius users mailing list 抄送： 主题： Re: No authenticate method (Auth-Type) configuration found Hi Jason, I also have the same problem before. Change the User-Password to Cleartext-Password := "your password" in the users file. I hope it will work. SYED On Thu, Sep 18, 2008 at 8:15 AM, browan.jason <browan.jason@gmail.com> wrote: Hi all, I have got some problems when use freeradius. freeradius version: FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51 My system: Fedora core 4 Kernel version: 2.6.11-1.1369_FC4 When i test the radius server, I have add something into /usr/local/etc/raddb/users like this: test1 Auth-Type := Local, User-Password == "123456" User-Password =="123456", Service-Type=Framed-User, Framed-Protocol=PPP, Framed-IP-Address=192.168.121.99, Framed-IP-Netmask=255.255.252.0 Add this into clients.conf: client 192.168.121.43{ secret = mmmmmm shortname = remote nastype = other } Then start the freeradius server and use radtest to check this server: radtest test1 123456 192.168.121.49 0 mmmmmm 192.168.121.49 is my server's IP, My local machine IP address is 192.168.121.43. But, It always failed! Following is the client's information: Sending Access-Request of id 161 to 192.168.121.49:1812 User-Name = "test1" User-Password = "123456" NAS-IP-Address = freepp NAS-Port = 0 rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20 And radius server's debuf information: rad_recv: Access-Request packet from host 192.168.121.43:32768, id=161, length=57 User-Name = "test1" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 modcall: group authorize returns ok for request 2 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 2 for 1 seconds Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 161 to 192.168.121.43:32768 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 161 with timestamp 48d1f126 Nothing to do. Sleeping until we see a request. As you see, every time he told me "No authenticate method(Auth-Type) configuration found for the request......", I don't konw why? Could you please give me some help? Many Thanks! 2008-09-18 Jason Zhang - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51 Upgrade. Alan DeKok.
Hi Alan, Thanks, I have tried the new version(freeradius-server-2.1.0) before, But when i compile it, some error appeared: listen.c:97:54: unterminated argument list invoking macro "rad_assert" listen.c: In function `client_listener_find': listen.c:99: `rad_assert' undeclared (first use in this function) listen.c:99: (Each undeclared identifier is reported only once listen.c:99: for each function it appears in.) listen.c:110: syntax error before ')' token So i use this old version. 2008-09-18 Jason 发件人： Alan DeKok 发送时间： 2008-09-18 15:46:51 收件人： FreeRadius users mailing list 抄送： 主题： Re: No authenticate method (Auth-Type) configuration found browan.jason wrote: - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
rad_recv: Access-Request packet from host 192.168.121.43:32768, id=161, length=57 User-Name = "test1" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0
This is a pap request.
Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 modcall: group authorize returns ok for request 2 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
preprocess, chap, mschap, suffix, eap - no pap listed in authorize section. List it last. Ivan Kalik Kalik Informatika ISP
participants (5)
-
Alan DeKok -
browan.jason -
Jason
-
Syed Anwarul Hasan -
tnt＠kalik.net