Hi all, I have got some problems when use freeradius. freeradius version: FreeRADIUS Version 1.0.5, for host , built on Sep 9 2008 at 11:11:51 My system: Fedora core 4 Kernel version: 2.6.11-1.1369_FC4 When i test the radius server, I have add something into /usr/local/etc/raddb/users like this: test1 Auth-Type := Local, User-Password == "123456" User-Password =="123456", Service-Type=Framed-User, Framed-Protocol=PPP, Framed-IP-Address=192.168.121.99, Framed-IP-Netmask=255.255.252.0 Add this into clients.conf: client 192.168.121.43{ secret = mmmmmm shortname = remote nastype = other } Then start the freeradius server and use radtest to check this server: radtest test1 123456 192.168.121.49 0 mmmmmm 192.168.121.49 is my server's IP, My local machine IP address is 192.168.121.43. But, It always failed! Following is the client's information: Sending Access-Request of id 161 to 192.168.121.49:1812 User-Name = "test1" User-Password = "123456" NAS-IP-Address = freepp NAS-Port = 0 rad_recv: Access-Reject packet from host 192.168.121.49:1812, id=161, length=20 And radius server's debuf information: rad_recv: Access-Request packet from host 192.168.121.43:32768, id=161, length=57 User-Name = "test1" User-Password = "123456" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "test1", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 modcall: group authorize returns ok for request 2 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 2 for 1 seconds Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 161 to 192.168.121.43:32768 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 161 with timestamp 48d1f126 Nothing to do. Sleeping until we see a request. As you see, every time he told me "No authenticate method(Auth-Type) configuration found for the request......", I don't konw why? Could you please give me some help? Many Thanks! 2008-09-18 Jason Zhang