Chris, I have added the "edir = yes" (also found some information about also adding edir_autz = yes) and it did not make a difference. Unfortunately it did not make a difference. I am going to set things back to a clean install and try again. LDAP is set to port to port 636 in the ldap modules as well. Any other suggestions? Thanks in advance. Brian

...

...

"Teague, Christopher J." <Chris.Teague@mybrighthouse.com> 4/9/2015 07:31 AM >>> Hi Brian,

If you are using FR to proxy off authentication requests to ESD you'll want to look at using the Universal Password plugin (feature of eDirectory) and then configure FR to use NMAS to connect to your eDirectory instance. Within ldap configuration, look for: # Set to yes if you have eDirectory and want to use the universal # password mechanism. edir = yes Modify the port you connect to eDirectory if needed (I've seen 636 used in the past). This will permit FR to obtain the cleartext password from eDirectory so the MS-CHAPv2 one way has can be compared against what the 802.1x EAP client is sending. Right now the user is sending the one way hash and you do not have anything to compare it to on the directory side. Chris Teague -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+chris.teague=mybrighthouse.com@lists.freeradius.org] On Behalf Of Brian Boere Sent: Wednesday, April 08, 2015 9:49 PM To: Freeradius-Users@lists.freeradius.org Subject: Issues getting SLES11 FreeRadius working with eDirectory We have a SLES10 SP4 server with freeradius (version 1.1.7-21.8.39 according to YAST2) working with eDirectory. We have it set so that if a user is not a member of an eDirectory group, they cannot get connected to the wireless AP. We are wanting to add a second wireless network and have authentication work if the NAS-ID and eDirectory groups are a specific match. We have done some reading and found that it is supposed to be easier to accomplish this using FreeRadius version 2. So we now have a SLES11SP3 server configured with Freeradius (version 2.1.1-7.18.1 according to YAST2). When using radtest, the LDAP requests all seem to go through properly. (if not a member of the edir group, get a message that the user is not allowed to connect, if member of the edir group, get a successful connection message). When we try to connect with a wireless device, we get prompted for the username/password and get the option to accept the security certificates. The device will not connect. We have rebuilt the freeradius on the SLES10 server several times and can get it to work each time without issues. We have made the same configuration changes on the SLES11 server, and cannot get it to connect. (we are obviously missing something, but cannot find it) This is the radiusd -X log: FreeRADIUS Version 2.1.1, for host x86_64-suse-linux-gnu, built on Feb 28 2014 at 23:17:30 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.1.53 { require_message_authenticator = no secret = "sophos123" shortname = "RadiusServer" } client 192.168.1.1 { require_message_authenticator = no secret = "sophos123" shortname = "SophosAppliance" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/servercert.pem" certificate_file = "/etc/raddb/certs/servercert.pem" CA_file = "/etc/raddb/certs/rootcert.pem" private_key_password = "Donkey01" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "192.168.1.14" port = 389 password = "chevy01" identity = "cn=brian,ou=ou,o=org" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=ou,o=org" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "npsmPassword" auto_header = no access_attr_used_for_allow = no groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x7f249ba1b300 Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=84, length=162 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x0201000c016d617269737361 Message-Authenticator = 0x2d290123d7e9601ba913c48682a80b59 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 192.168.1.14:389, authentication 0 rlm_ldap: bind as cn=brian,ou=ou,o=org/chevy01 to 192.168.1.14:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok [ldap] performing user authorization for marissa [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) [ldap] expand: ou=ou,o=org -> ou=ou,o=org rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user marissa authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 84 to 192.168.1.1 port 44783 Reply-Message = "You have been authenticated" EAP-Message = 0x010200061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcd902052adaeb377365c8c185 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=85, length=320 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x0202009819800000008e16030100890100008503015525d4b72ee5a48517ff521fd6cf39ee30e6874ec5f58dda752e7aadedfe2fcc00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0xd9001cbcd902052adaeb377365c8c185 Message-Authenticator = 0x758edab72cfda72bd82f0c28d4259c98 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08e7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 85 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 0x39322e3136382e312e31343125302306092a864886f70d0109011616627269616e2e626f657265406e657477697a652e636130820122300d06092a864886f70d01010105000382010f003082010a0282010100b45fca756783b50bbfe192db5605f61d380516c1de497e826fd3a2daf955704b178bc3a460e3ccfce49bccbcea14311dbfd09ca5a4e23ebbde8c403dc4fe319f67e230e18c76e1c654ded7117dc92982af9b130aa16e142c57b79c90b42033cd74fbe9b8441600f3498e5b27806a4c28eb73b2581dc971114144aaa902d317f4ac15686aa5437b0e339eee9421c20179fcc4fa33bf8774ffb5db47c820b891e9625c2592f2be9e71feb5 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc58044f3ddec6c0e7f82e084 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcd803052adaeb377365c8c185 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=86, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x020300061900 State = 0xd9001cbcd803052adaeb377365c8c185 Message-Authenticator = 0x3a716f65614e706af1f54a3a8174f9cc +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 3 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 86 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7240626f6572652e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcdb04052adaeb377365c8c185 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=87, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x020400061900 State = 0xd9001cbcdb04052adaeb377365c8c185 Message-Authenticator = 0x44e85cf35b2652aeff56bfcd1b16c5cd +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 4 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 87 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcda05052adaeb377365c8c185 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=88, length=506 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 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 EAP-Message = 0x14b7bbb48647fb9fdc5fd14e51c44d615ec192713ae3fb021403010001011603010030b5f1af276c5e2fc65e0d3cf690ac2b86b52c39a92aad5202f9eca964e1dcacd02856d7628617f4b10e7f4e68175e3599 State = 0xd9001cbcda05052adaeb377365c8c185 Message-Authenticator = 0x073c9d8ac8cc325748672451ed420003 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 5 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 88 to 192.168.1.1 port 44783 EAP-Message = 0x01060041190014030100010116030100304fb3adbe14355ec984ad62752e83470eff341ddf8cd09b7f24f9af73977020a400b89fd96b88d3cebe11c4e853c8d67a Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcdd06052adaeb377365c8c185 Finished request 4. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=89, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x020600061900 State = 0xd9001cbcdd06052adaeb377365c8c185 Message-Authenticator = 0x4887f74174bf5b3756f3a3d023191da0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 6 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 89 to 192.168.1.1 port 44783 EAP-Message = 0x0107002b190017030100206b27502b3a646f9fdb694ce16590e60c23995ea191e5a23adcb4b2659fdf3cf6 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcdc07052adaeb377365c8c185 Finished request 5. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=90, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x0207002b19001703010020d55d342c1b1bd4c455b0062ad55ff3f7ae5ad1db215f7e324ea3d8ed7ed58daa State = 0xd9001cbcdc07052adaeb377365c8c185 Message-Authenticator = 0x10d5b34de8fb14107b2dccab6e94272e +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 7 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - marissa [peap] Got tunnled request EAP-Message = 0x0207000c016d617269737361 server (null) { PEAP: Got tunneled identity of marissa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x0207000c016d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 7 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x010800211a0108001c104c7d6d16e4d3682db039701272ef79586d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x27b4133127bc09524480fddc531df9e5 [peap] Got tunneled reply RADIUS code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x010800211a0108001c104c7d6d16e4d3682db039701272ef79586d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x27b4133127bc09524480fddc531df9e5 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 90 to 192.168.1.1 port 44783 EAP-Message = 0x0108004b19001703010040427a79bc52032f8dd9260e9b8fae5b50244fcf98c6d97c541103fd3249fb44c1cd8abec69572b2df56644dcba630c48d050b553de594c04b9aa47148186a2115 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcdf08052adaeb377365c8c185 Finished request 6. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=91, length=275 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x0208006b19001703010060d05f0b2f7e1f68309679d43d8cf9d1ceaed585bc13d0f63327ce85dac120ae511c1262a39b1fb943d74aecae5bd9d9e142c2aa07d7f797097d69ff84594adedff500bdfdf178fbf63ba0e36aa9b9ed184f62a489f942c9f4a4ac7a9f572c591b State = 0xd9001cbcdf08052adaeb377365c8c185 Message-Authenticator = 0x8cc456db98d3e8de5e271ac3582ceec3 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 8 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x020800421a0208003d31bdd42b430d7fae3f0e51831ffaa272510000000000000000f62747d73832a3ebd653e6f008a1b58c0c6b0c64ceb8c78a006d617269737361 server (null) { PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x020800421a0208003d31bdd42b430d7fae3f0e51831ffaa272510000000000000000f62747d73832a3ebd653e6f008a1b58c0c6b0c64ceb8c78a006d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" State = 0x27b4133127bc09524480fddc531df9e5 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 8 length 66 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for marissa with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\010E=691 R=1" EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 91 to 192.168.1.1 port 44783 EAP-Message = 0x0109002b190017030100202666e0fc4864bb1b4246ae2666c3c8a332996c8be347fc9e75497ad0ac439649 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9001cbcde09052adaeb377365c8c185 Finished request 7. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=92, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x0209002b19001703010020c1e2322db45a1fb3a71d66f3753f631f70928867ac73dd0e81236fb5a29d98cd State = 0xd9001cbcde09052adaeb377365c8c185 Message-Authenticator = 0xac4310fef08997338b69f8b5899758ec +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} ++[ldap] returns noop Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 92 to 192.168.1.1 port 44783 EAP-Message = 0x04090004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=93, length=162 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d4000c016d617269737361 Message-Authenticator = 0x5f3439e62d108fe4ec3453c944345f1d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 212 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok [ldap] performing user authorization for marissa [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) [ldap] expand: ou=ou,o=org -> ou=ou,o=org rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user marissa authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 93 to 192.168.1.1 port 44783 Reply-Message = "You have been authenticated" EAP-Message = 0x01d500061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4cacf7adde98b3784d2ef1bf Finished request 9. Going to the next request Waking up in 3.2 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=94, length=320 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d5009819800000008e16030100890100008503015525d4b816975f51351d97cfa37244f07191e59fa5ed1467144801e94b0f1d1c00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0x4c79eeeb4cacf7adde98b3784d2ef1bf Message-Authenticator = 0x23f7a8e56a5b168597d8521d99cff1ba +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 213 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08e7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 94 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc58044f3ddec6c0e7f82e084 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4daff7adde98b3784d2ef1bf Finished request 10. Going to the next request Waking up in 3.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=95, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d600061900 State = 0x4c79eeeb4daff7adde98b3784d2ef1bf Message-Authenticator = 0xdf1a34fc2b331ab8223f0914e5a375d9 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 214 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 95 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x010d041f161d596153542047656e657261746564204341204365727469666963617465301106096086480186f8420101040403020106300b0603551d0f040403020106301d0603551d0e041604147222ffc4de589f8cfa5333912c723d41d4a2661c3081820603551d23047b307980147222ffc4de589f8cfa5333912c723d41d4a2661ca156a4543052310b3009060355040613025553311f301d06035504031316596153542044656661756c7420434120286d657461293122302006092a864886f70d0109011613706f73746d617374657240626f6572652e6361820900e50dd4f472f2f487301e0603551d11041730158113706f73746d61737465 EAP-Message = 0x7240626f6572652e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4eaef7adde98b3784d2ef1bf Finished request 11. Going to the next request Waking up in 3.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=96, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d700061900 State = 0x4c79eeeb4eaef7adde98b3784d2ef1bf Message-Authenticator = 0x9a063525d73ce28faa24e08ebe285454 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 215 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 96 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4fa1f7adde98b3784d2ef1bf Finished request 12. Going to the next request Waking up in 3.0 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=97, length=506 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 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 EAP-Message = 0xef0c4af27d967df6c3f56b6f5f475f30e7cff3eac9bed619140301000101160301003086a05537342a365768b7f6212c3ce5ae62ce6e98479b102d725020f94a3642a5165ac932c6db50f6af86ea4da31b42c2 State = 0x4c79eeeb4fa1f7adde98b3784d2ef1bf Message-Authenticator = 0xf9074324e9c31069cf37be2a2c38922d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 216 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 97 to 192.168.1.1 port 44783 EAP-Message = 0x01d9004119001403010001011603010030ec4119debae3083cdaccc8610558ce4a65aeced17553eee9c1ad079e3218daf575314615ea75d1dbb7b837aae7869dc3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb48a0f7adde98b3784d2ef1bf Finished request 13. Going to the next request Waking up in 3.0 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=98, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d900061900 State = 0x4c79eeeb48a0f7adde98b3784d2ef1bf Message-Authenticator = 0x5ff41ba10c61525f1d5cffba92e0c93f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 217 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 98 to 192.168.1.1 port 44783 EAP-Message = 0x01da002b19001703010020dd5077e04204e1677d2f4683939405977f9cd8bc67ef336b4f8a4cbdf987b309 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb49a3f7adde98b3784d2ef1bf Finished request 14. Going to the next request Waking up in 3.0 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=99, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02da002b19001703010020b89f05c9c405c9e43821efc0ff9e872313ecb72139c46527981f9052aea96d0b State = 0x4c79eeeb49a3f7adde98b3784d2ef1bf Message-Authenticator = 0x090dd6c63c6d91d836dd845721cc7dd8 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 218 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - marissa [peap] Got tunnled request EAP-Message = 0x02da000c016d617269737361 server (null) { PEAP: Got tunneled identity of marissa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02da000c016d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 218 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01db00211a01db001c1006f44211bbf1dba43133529c64c2fa9b6d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8a77cf098aacd550855fedefe5b907b1 [peap] Got tunneled reply RADIUS code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01db00211a01db001c1006f44211bbf1dba43133529c64c2fa9b6d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x8a77cf098aacd550855fedefe5b907b1 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 99 to 192.168.1.1 port 44783 EAP-Message = 0x01db004b1900170301004003353bd1e64ee9f527af5b929a2808f15b2dbcc80600b775c63995e0e3ae800f7d1a1a9f15c17f84d2fc249acfc870e313e8d3f46d4ee423e84d4cc6fd07372d Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4aa2f7adde98b3784d2ef1bf Finished request 15. Going to the next request Waking up in 3.0 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=100, length=275 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02db006b19001703010060ffa9aac740c65dc12e7a959f296bf340e055a4603f4cbcbde091a2d0820529a0ce5244adcd5122e0ccbbbde47834139aa91365b6105dc989444ca730cd264c9e2366d317f205c5d4bcfcbd7827f73c9ee0f9bb220f69f470f63bfb7c17f42b5d State = 0x4c79eeeb4aa2f7adde98b3784d2ef1bf Message-Authenticator = 0x39b6d35b79cb30bbd8ce5cd98c68bdea +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 219 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x02db00421a02db003d31098aaae470987c845a9a81acf3bfa4a9000000000000000060997998dc92fde1a889706b2df5c8aea37a97d63644286f006d617269737361 server (null) { PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02db00421a02db003d31098aaae470987c845a9a81acf3bfa4a9000000000000000060997998dc92fde1a889706b2df5c8aea37a97d63644286f006d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" State = 0x8a77cf098aacd550855fedefe5b907b1 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 219 length 66 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for marissa with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\333E=691 R=1" EAP-Message = 0x04db0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\333E=691 R=1" EAP-Message = 0x04db0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 100 to 192.168.1.1 port 44783 EAP-Message = 0x01dc002b19001703010020234c8b70f2d7586fee9428c53f96cee4363089b244c5ee64c6d723b5a2dd5ecf Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4c79eeeb4ba5f7adde98b3784d2ef1bf Finished request 16. Going to the next request Waking up in 3.0 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=101, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02dc002b190017030100202f8b97f87bcb382c1712e9e0890ad643a45a137be8301c0625a0d28ceaabe601 State = 0x4c79eeeb4ba5f7adde98b3784d2ef1bf Message-Authenticator = 0xfa1f12d313eb1b4de35053eacef7da9c +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 220 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} ++[ldap] returns noop Delaying reject of request 17 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 17 Sending Access-Reject of id 101 to 192.168.1.1 port 44783 EAP-Message = 0x04dc0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=102, length=162 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02ca000c016d617269737361 Message-Authenticator = 0x17a397da00b824abf91a03c74dd89038 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 202 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok [ldap] performing user authorization for marissa [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) [ldap] expand: ou=ou,o=org -> ou=ou,o=org rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user marissa authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 102 to 192.168.1.1 port 44783 Reply-Message = "You have been authenticated" EAP-Message = 0x01cb00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300cecafa33f34fb10b4809c83e Finished request 18. Going to the next request Waking up in 1.3 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=103, length=320 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cb009819800000008e16030100890100008503015525d4bac1cbb767303f654b33b6628f5e1d6f9da3feec6901403f8ac797492200004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0xce01e300cecafa33f34fb10b4809c83e Message-Authenticator = 0x83d4a6de2f42960ab429de7f4d5f37f0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 203 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08e7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 103 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x4a89ff06510eb3a61579daa51418fca49d0bc5d9ead89ba9b28fb448d66f474d0f4c8ab04fd61b47ce342f28bbb26f9d1314cc5bdb570d005c7ea818943c5368802b6763676e1368bff341d496b67ebd1def0d7de98b0203010001a38201483082014430090603551d1304023000303006096086480186f842010d04231621596153542047656e65726174656420536572766572204365727469666963617465301106096086480186f8420101040403020640300b0603551d0f0404030205a0301d0603551d0e04160414ed9ac3210a8c1e94ddb3e3ba2c39b8b695a7ef583081820603551d23047b307980147222ffc4de589f8cfa5333912c723d41 EAP-Message = 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 EAP-Message = 0xc58044f3ddec6c0e7f82e084 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300cfcdfa33f34fb10b4809c83e Finished request 19. Going to the next request Waking up in 1.2 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=104, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cc00061900 State = 0xce01e300cfcdfa33f34fb10b4809c83e Message-Authenticator = 0x0b3eb60b88e4d1d362aec3f7a641de5b +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 204 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 104 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7240626f6572652e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300ccccfa33f34fb10b4809c83e Finished request 20. Going to the next request Waking up in 1.2 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=105, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cd00061900 State = 0xce01e300ccccfa33f34fb10b4809c83e Message-Authenticator = 0xa43397ec7d12fe2a77126ad2442ed7e6 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 205 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 105 to 192.168.1.1 port 44783 EAP-Message = 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 EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300cdcffa33f34fb10b4809c83e Finished request 21. Going to the next request Waking up in 1.2 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=106, length=506 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 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 EAP-Message = 0x62bd37a94346cb02cf58db7ea00775cf22ac9c331dd4c5ee14030100010116030100305eadf915572979dcefd54005f2ea04446726c3694c1a6be20388a55f136d672c0c1ff3968d428a054c0d3aa6e069c437 State = 0xce01e300cdcffa33f34fb10b4809c83e Message-Authenticator = 0xc07f3a03ca86b7c21c832cde6ca90e8d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 206 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 106 to 192.168.1.1 port 44783 EAP-Message = 0x01cf0041190014030100010116030100304829c62351e52bd5b670e2e03a108171f2c5bdc558cad7a56725a29123a7a78d42b88dbfe07cdabd7d35c55877119632 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300cacefa33f34fb10b4809c83e Finished request 22. Going to the next request Waking up in 1.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=107, length=174 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cf00061900 State = 0xce01e300cacefa33f34fb10b4809c83e Message-Authenticator = 0x5fb219c59a70c0761ef3a113ad774769 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 207 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 107 to 192.168.1.1 port 44783 EAP-Message = 0x01d0002b190017030100205acfab8e6c9de1d4cf1483baa3a17ae2b91fc3fd594b975d8652c887f20e2781 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300cbd1fa33f34fb10b4809c83e Finished request 23. Going to the next request Waking up in 1.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=108, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d0002b19001703010020fd32a4e904d2d88881091407ce432248a586e6ead8e8560d9ce6fb4b97c772b8 State = 0xce01e300cbd1fa33f34fb10b4809c83e Message-Authenticator = 0xa1a3ed181082aa170dad26734174fab8 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 208 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - marissa [peap] Got tunnled request EAP-Message = 0x02d0000c016d617269737361 server (null) { PEAP: Got tunneled identity of marissa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02d0000c016d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 208 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01d100211a01d1001c1023c4e56ce6cc92f8aceaf35ee03427d86d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x745bf08c748aeaf7fc586b32e6203876 [peap] Got tunneled reply RADIUS code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01d100211a01d1001c1023c4e56ce6cc92f8aceaf35ee03427d86d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x745bf08c748aeaf7fc586b32e6203876 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 108 to 192.168.1.1 port 44783 EAP-Message = 0x01d1004b19001703010040cd91b35cfabec35d0462d201122bb2e93741775304b16d9a1d6dac65ec3a029c5be6f0b29dd0e86ca14c8c9aa741cd34b623044ca95c629aaab8816b1dbc5852 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300c8d0fa33f34fb10b4809c83e Finished request 24. Going to the next request Waking up in 1.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=109, length=275 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d1006b190017030100609a897b8987754b09e81aca14dc9a9098640b9a05cbe31d4b99129bb7fb016b9a816db212d1d9800a1a525c01ab6ef3966e1b38f67ca89b1aa9f89412098a8616c6b3cb940148033cc11a17f48a55ebbca06bf3e7f26c33da48eb0279388697ed State = 0xce01e300c8d0fa33f34fb10b4809c83e Message-Authenticator = 0xc8f3bd2fdbda518d59ba9c1f7d7ccd67 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 209 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x02d100421a02d1003d3154c095501f5720d0dae982b518982a9a000000000000000085b48dcd56edca08a085b3fd1dfb05d6a544625d5db0ee00006d617269737361 server (null) { PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02d100421a02d1003d3154c095501f5720d0dae982b518982a9a000000000000000085b48dcd56edca08a085b3fd1dfb05d6a544625d5db0ee00006d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" State = 0x745bf08c748aeaf7fc586b32e6203876 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 209 length 66 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for marissa with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\321E=691 R=1" EAP-Message = 0x04d10004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\321E=691 R=1" EAP-Message = 0x04d10004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 109 to 192.168.1.1 port 44783 EAP-Message = 0x01d2002b190017030100206c6a2815e2226ebc4ebadbe29ef167db65e402ebc8a15e98d10e97c210ae81d7 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xce01e300c9d3fa33f34fb10b4809c83e Finished request 25. Going to the next request Waking up in 1.1 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 44783, id=110, length=211 User-Name = "marissa" NAS-Identifier = "Rad_test2" Called-Station-Id = "00-1A-8C-29-A2-C2:Rad_test2" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d2002b19001703010020c9efb59fe5d4d3a00154aec0e02e65b128eaa9c11083a1fa3002834c82280894 State = 0xce01e300c9d3fa33f34fb10b4809c83e Message-Authenticator = 0xcbde3df03b9879f30cb1eec56354b553 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 210 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} ++[ldap] returns noop Delaying reject of request 26 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 26 Sending Access-Reject of id 110 to 192.168.1.1 port 44783 EAP-Message = 0x04d20004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.1 seconds. Cleaning up request 0 ID 84 with timestamp +11 Cleaning up request 1 ID 85 with timestamp +12 Cleaning up request 2 ID 86 with timestamp +12 Cleaning up request 3 ID 87 with timestamp +12 Cleaning up request 4 ID 88 with timestamp +12 Cleaning up request 5 ID 89 with timestamp +12 Cleaning up request 6 ID 90 with timestamp +12 Cleaning up request 7 ID 91 with timestamp +12 Waking up in 1.0 seconds. Cleaning up request 8 ID 92 with timestamp +12 Waking up in 0.5 seconds. Cleaning up request 9 ID 93 with timestamp +13 Cleaning up request 10 ID 94 with timestamp +13 Cleaning up request 11 ID 95 with timestamp +13 Cleaning up request 12 ID 96 with timestamp +13 Cleaning up request 13 ID 97 with timestamp +13 Cleaning up request 14 ID 98 with timestamp +13 Cleaning up request 15 ID 99 with timestamp +13 Cleaning up request 16 ID 100 with timestamp +13 Waking up in 1.0 seconds. Cleaning up request 17 ID 101 with timestamp +13 Waking up in 0.6 seconds. Cleaning up request 18 ID 102 with timestamp +15 Cleaning up request 19 ID 103 with timestamp +15 Cleaning up request 20 ID 104 with timestamp +15 Cleaning up request 21 ID 105 with timestamp +15 Cleaning up request 22 ID 106 with timestamp +15 Cleaning up request 23 ID 107 with timestamp +15 Cleaning up request 24 ID 108 with timestamp +15 Cleaning up request 25 ID 109 with timestamp +15 Waking up in 1.0 seconds. Cleaning up request 26 ID 110 with timestamp +15 Ready to process requests. To me, it looks like the edirectory password is not getting prompted for properly, but I don't know where to fix that. Any guidance to what we have missed will be greatly appreciated. (if the config files are needed, please let me know and I will post) Thanks in advance. Brian - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html ________________________________ CONFIDENTIALITY NOTICE: This e-mail may contain information that is privileged, confidential or otherwise protected from disclosure. **If you are not the intended recipient of this e-mail, please notify the sender immediately by return e-mail, purge it and do not disseminate or copy it. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- This email was Virus checked by Astaro Security Gateway. http://www.sophos.com

On 10 Apr 2015, at 09:16, Michael Ströder <michael@stroeder.com> wrote:

Brian Boere wrote:

...

Chris, I have added the "edir = yes" (also found some information about also adding edir_autz = yes) and it did not make a difference.

AFAIK edir = yes uses a Novell-specific LDAP extended operation for extracting the Universal Password from eDirectory as clear-text.

Correct

Not sure whether your security policy allows that. Personally I'd recommend not to use it. But that's me.

It's needed for PEAP

Special admin rights are needed in eDirectory for the FreeRADIUS system user to be allowed to do that.

IIRC you also must use an encrypted LDAP connection (LDAPS or StartTLS ext op.) when using this particular LDAP extended operation. That's probably what Christopher meant with "Modify the port you connect to eDirectory [..]".

You might have to prefix the hostname with ldaps:// at least you do in v3.0.x, just setting the port to 636 means that libldap will attempt to connect using unencrypted LDAP to the ldaps port, which is expecting a TLS session to be established. ldap != tls so it won't work. Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS development team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2

Hi all, Any help ? Best regards. Mounir.

Le 10 avr. 2015 à 22:43, Mounir Boussedjra <mounir.boussedjra@gmail.com> a écrit :

All,

First of all sorry for my English.

I have a WiFi infrastructure in which the user’s database are managed by different Cisco ISE Radius.

I look to replace the ISE by a FreeRadius servers but before I need to confirm if the Freeradius is able to use sequentially different database to check the use’s crendentials.

I explains:

I my current configuration, the checks the user credentials locally (on the internal database) and if the authentication fails the forwards the credential to the second ISE.

This configuration seems possible if the Freeradius is configured as proxy with the option nostrip.

However, in my configuration I have the user name without a domain.

My question is : can i configure the freeradius to use sequentially different user’s database for the authentication?

Thank you for your help.

Mounir.

Hi Alan Thank you for the first answer and sorry for the insistence. I’m a network engineer and my skills in systems are limited. During 2 weeks I tries to fined how I can use sequentially external Radius servers without success. The use of the Freeradius on proxy configuration seems a good deal to use different external radius serveurs but not sequentially. Do you have an idea/suggestion? Best regards.

Le 11 avr. 2015 à 14:37, Alan DeKok <aland@deployingradius.com> a écrit :

On Apr 11, 2015, at 8:33 AM, Mounir Boussedjra <mounir.boussedjra@gmail.com> wrote:

...

Hi all,

Any help ?

This is a free list. People are not required to answer your questions at all, much less quickly.

In short, FreeRADIUS can check multiple databases. It can do more than any other RADIUS server. It is more flexible, and more configurable.

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

in the current WiFi infrastructure w have two different databases. The content of these database is different. The first database is managed by a Freeradius and the second one is based on Cisco Radius servers. These database are managed by different team and the security team is not agree to merge the content. I’m looking to allow the connection to both infrastructures with the same credential and implement the user mobilité from one infrastructure to another. The ISE allows to use of multiple database. So it checks the credential locally and if the authentication fails it send the credential to the external radius server (in my case the Freeradius). And this works fine. I trie to implement the same behavior with the freeradius. As conclusion, I need help with multiple database. Best regards. Mounir.

And what are you looking for? Help with multiple databases? Or multiple servers?

When your question is vague, the answers are vague, too.

Le 13 avr. 2015 à 21:45, Alan DeKok <aland@deployingradius.com> a écrit :

On Apr 13, 2015, at 3:36 PM, Mounir Boussedjra <mounir.boussedjra@gmail.com> wrote:

...

Thank you for the first answer and sorry for the insistence. I’m a network engineer and my skills in systems are limited.

Learn. Everyone else did.

...

During 2 weeks I tries to fined how I can use sequentially external Radius servers without success.

Then ask a question. That's what the list is for.

...

The use of the Freeradius on proxy configuration seems a good deal to use different external radius serveurs but not sequentially. Do you have an idea/suggestion?

Read raddb/proxy.conf. You can use "fail-over" home servers.

FreeRADIUS will NOT proxy the same packet to multiple servers. That doesn't make any sense.

And what are you looking for? Help with multiple databases? Or multiple servers?

When your question is vague, the answers are vague, too.

Alan DeKok.

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

All, First of all sorry for my English. I have a WiFi infrastructure in which the user’s database are managed by different Cisco ISE Radius. I look to replace the ISE by a FreeRadius servers but before I need to confirm if the Freeradius is able to use sequentially different database to check the use’s crendentials. I explains: I my current configuration, the checks the user credentials locally (on the internal database) and if the authentication fails the forwards the credential to the second ISE. This configuration seems possible if the Freeradius is configured as proxy with the option nostrip. However, in my configuration I have the user name without a domain. My question is : can i configure the freeradius to use sequentially different user’s database for the authentication? Thank you for your help. Mounir.

I have tried adding the "edir = yes" to the ldap file in the modules folder but that has not helped the issue. I have also completely re-installed FreeRadius on the server and when through the config steps that we have done on the SLES10 server. The eDirectory side of things is working because we have been able to get it to with with SLES10 and an older version of FreeRadius. Any direction will be greatly appreciated. I have included my config files as well: LDAP: ldap { server = "192.168.1.14" identity = "cn=admin,ou=ou,o=org" password = xxxxx basedn = "ou=ou,o=org" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 tls { start_tls = no port = 636 tls_mode = yes } dictionary_mapping = ${confdir}/ldap.attrmap password_attribute = nspmPassword edir_account_policy_check = no edir = yes edir_autz = yes # # Group membership checking. Disabled by default. # # groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" # groupmembership_attribute = radiusGroupName access_attr_used_for_allow = no } CLIENTS.CONF: client 192.168.1.1 { secret = sophos123 shortname = SophosAppliance } client 192.168.1.53 { secret = sophos123 shortname = RadiusServer } EAP.CONF eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 md5 { } # Cisco LEAP leap { } # Generic Token Card. gtc { auth_type = PAP } ## EAP-TLS tls { certdir = ${confdir}/certs cadir = ${confdir}/certs private_key_password = Donkey01 private_key_file = /etc/raddb/certs/servercert.pem certificate_file = /etc/raddb/certs/servercert.pem CA_file = /etc/raddb/certs/rootcert.pem dh_file = ${certdir}/dh random_file = ${certdir}/random make_cert_command = "${certdir}/bootstrap" cache { enable = no lifetime = 24 # hours max_entries = 255 } } # The TTLS module implements the EAP-TTLS protocol, # which can be described as EAP inside of Diameter, # inside of TLS, inside of EAP, inside of RADIUS... ttls { default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } peap { default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no # proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } mschapv2 { } } RADIUSD- X log: FreeRADIUS Version 2.1.1, for host x86_64-suse-linux-gnu, built on Feb 28 2014 at 23:17:30 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/sql.conf including configuration file /etc/raddb/sql/mysql/dialup.conf including configuration file /etc/raddb/sql/mysql/counter.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel group = radiusd user = radiusd including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client 192.168.1.1 { require_message_authenticator = no secret = "sophos123" shortname = "SophosAppliance" } client 192.168.1.53 { require_message_authenticator = no secret = "sophos123" shortname = "RadiusServer" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/servercert.pem" certificate_file = "/etc/raddb/certs/servercert.pem" CA_file = "/etc/raddb/certs/rootcert.pem" private_key_password = "Donkey01" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "192.168.1.14" port = 389 password = "donkey" identity = "cn=admin,ou=ou,o=org" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=ou,o=org" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" password_attribute = "nspmPassword" auto_header = no access_attr_used_for_allow = no groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message conns: 0x7f2b6a1c6dd0 Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=129, length=160 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02a7000c016d617269737361 Message-Authenticator = 0xc40cb24dd609b598793bc8f8da43f752 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 167 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to 192.168.1.14:389, authentication 0 rlm_ldap: bind as cn=admin,ou=ou,o=org/donkey to 192.168.1.14:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok [ldap] performing user authorization for marissa [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) [ldap] expand: ou=ou,o=org -> ou=ou,o=org rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] Error reading Universal Password.Return Code = 80 [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user marissa authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 129 to 192.168.1.1 port 51613 Reply-Message = "You have been authenticated" EAP-Message = 0x01a800061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e20e6663649037374b63b397 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=130, length=318 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02a8009819800000008e160301008901000085030155280fd2bb78b512c69fcd66d58818d876ea95ec220f00fde28e9468371ae66f00004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0xe2a67fb3e20e6663649037374b63b397 Message-Authenticator = 0x807e5e7b89564b53d61c27614ad92a18 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 168 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08e7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 130 to 192.168.1.1 port 51613 EAP-Message = 0x01a9040019c00000092b16030100310200002d030155280fddf6902d072bc74a89d4303d4d5230d7ab03058fc981c3bf2683fe350400002f000005ff0100010016030108e70b0008e30008e0000466308204623082034aa003020102020102300d06092a864886f70d01010505003052310b3009060355040613025553311f301d06035504031316596153542044656661756c7420434120286d657461293122302006092a864886f70d0109011613706f73746d617374657240626f6572652e6361301e170d3135303332363137303634365a170d3138303332353137303634365a304b310b3009060355040613024341311530130603550403130c31 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc58044f3ddec6c0e7f82e084 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e30f6663649037374b63b397 Finished request 1. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=131, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02a900061900 State = 0xe2a67fb3e30f6663649037374b63b397 Message-Authenticator = 0x13149290d51b6994ef692c1554e12dc7 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 169 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 131 to 192.168.1.1 port 51613 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7240626f6572652e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e00c6663649037374b63b397 Finished request 2. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=132, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02aa00061900 State = 0xe2a67fb3e00c6663649037374b63b397 Message-Authenticator = 0x2684bb1a91a1ee168f5e3ce442693351 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 170 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 132 to 192.168.1.1 port 51613 EAP-Message = 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 EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e10d6663649037374b63b397 Finished request 3. Going to the next request Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=133, length=504 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 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 EAP-Message = 0x51566e37a4aa819536cc53b643fa11410f962b6bb7e7df9714030100010116030100307bc77429c267fdeca0ebce338b9f6eda666db41634125fdf118d1b0b5a8c0ac757dcc4d60dcee6a42a154c12139ece5b State = 0xe2a67fb3e10d6663649037374b63b397 Message-Authenticator = 0xedcf4fd628874bcc3a4058fe6c8671ea +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 171 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 133 to 192.168.1.1 port 51613 EAP-Message = 0x01ac00411900140301000101160301003008bae1dbed220001087d0de4c0841bd7fe3c98d1b9dfd09c512db3e85823dd113add7993f97c66d1f98aa418925994a1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e60a6663649037374b63b397 Finished request 4. Going to the next request Waking up in 2.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=134, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02ac00061900 State = 0xe2a67fb3e60a6663649037374b63b397 Message-Authenticator = 0x1740a7940cac40547e72dce923e1f777 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 172 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 134 to 192.168.1.1 port 51613 EAP-Message = 0x01ad002b190017030100202f3f298d6d63c80ab2d9e3cb112da6006fd7f8c65fd640ac4efc3fb7e9d89871 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e70b6663649037374b63b397 Finished request 5. Going to the next request Waking up in 2.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=135, length=209 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02ad002b19001703010020b8277c22051734a1d79b891f40e9dfa9b445efee2c3a6bb18b78c13600bcf763 State = 0xe2a67fb3e70b6663649037374b63b397 Message-Authenticator = 0x89c500e3c06582a7872a7c6eb186b861 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 173 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - marissa [peap] Got tunnled request EAP-Message = 0x02ad000c016d617269737361 server (null) { PEAP: Got tunneled identity of marissa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02ad000c016d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 173 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01ae00211a01ae001c102059b5adfd9d796cde229f54b9086a7c6d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6e9c72a16e3268dfe32e5a513028cc5d [peap] Got tunneled reply RADIUS code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01ae00211a01ae001c102059b5adfd9d796cde229f54b9086a7c6d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6e9c72a16e3268dfe32e5a513028cc5d [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 135 to 192.168.1.1 port 51613 EAP-Message = 0x01ae004b19001703010040f8ced7ac7842bd7e650a0cca9ccd9cd97d5b01e70e88deeb5a67e882b9dfc39891237205e74ab4ba6a0f4f5fe064ee14f76683d0dc3d920c1590d20f3d330d50 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e4086663649037374b63b397 Finished request 6. Going to the next request Waking up in 2.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=136, length=273 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02ae006b19001703010060c9be74b4a867399b1e7b706c6a10673ee4543dc3581e8f3e5f422039cbaec349fdae3cdce30c1b5a80554543a61b46682fe6115923482a501f3ea0cef307298d3a08bae3974cd00d5fafdd7d8e9a2d03cc88ec0056bd52f0c97a9b8c881d96ea State = 0xe2a67fb3e4086663649037374b63b397 Message-Authenticator = 0xd7c43f5641335d53db21ada2e452b14f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 174 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x02ae00421a02ae003d313ef74485f36d5d8acab21e12bbbc5e4c0000000000000000dcaa026bcd62cf9c25d2c0618a068fb0fb3f7e6562f484be006d617269737361 server (null) { PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02ae00421a02ae003d313ef74485f36d5d8acab21e12bbbc5e4c0000000000000000dcaa026bcd62cf9c25d2c0618a068fb0fb3f7e6562f484be006d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" State = 0x6e9c72a16e3268dfe32e5a513028cc5d server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 174 length 66 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for marissa with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\256E=691 R=1" EAP-Message = 0x04ae0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\256E=691 R=1" EAP-Message = 0x04ae0004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 136 to 192.168.1.1 port 51613 EAP-Message = 0x01af002b19001703010020c342fec9f3a1390b661425462ac01fa92a9616185d5364dde3bf6a107dec233e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xe2a67fb3e5096663649037374b63b397 Finished request 7. Going to the next request Waking up in 2.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=137, length=209 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02af002b190017030100200d69c055d2230e25cfcccb53fe7face7f8605b07ace869c0674c7ca65132050c State = 0xe2a67fb3e5096663649037374b63b397 Message-Authenticator = 0xe7ec2184457734b33ccf4306bb9df715 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 175 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> marissa attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 8 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 8 Sending Access-Reject of id 137 to 192.168.1.1 port 51613 EAP-Message = 0x04af0004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=138, length=160 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02ce000c016d617269737361 Message-Authenticator = 0xb2901fd0c260240084739bb9b55a226f +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 206 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok [ldap] performing user authorization for marissa [ldap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [ldap] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) [ldap] expand: ou=ou,o=org -> ou=ou,o=org rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] Error reading Universal Password.Return Code = 80 [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] looking for reply items in directory... WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? [ldap] user marissa authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 138 to 192.168.1.1 port 51613 Reply-Message = "You have been authenticated" EAP-Message = 0x01cf00061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef8791ecfc2e7b808098bf84e7 Finished request 9. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=139, length=318 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02cf009819800000008e160301008901000085030155280fd6893092f1d123d6c0343cb3d983cbe86a8a8c4792028eb10b2253267400004a00ffc024c023c00ac009c007c008c028c027c014c013c011c012c026c025c02ac029c005c004c002c003c00fc00ec00cc00d003d003c002f000500040035000a0067006b00330039001601000012000a00080006001700180019000b00020100 State = 0x875ef5ef8791ecfc2e7b808098bf84e7 Message-Authenticator = 0x96e9b98945c0900b113ddf80d9a4c62d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 207 length 152 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 142 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0089], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 0031], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 08e7], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 139 to 192.168.1.1 port 51613 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc58044f3ddec6c0e7f82e084 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef868eecfc2e7b808098bf84e7 Finished request 10. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=140, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d000061900 State = 0x875ef5ef868eecfc2e7b808098bf84e7 Message-Authenticator = 0xdef84331772902491abb22e35d5b6be7 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 208 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 140 to 192.168.1.1 port 51613 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x7240626f6572652e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef858fecfc2e7b808098bf84e7 Finished request 11. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=141, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d100061900 State = 0x875ef5ef858fecfc2e7b808098bf84e7 Message-Authenticator = 0x8b49a88453c539d2ee728aaccc66da84 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 209 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake fragment handler [peap] eaptls_verify returned 1 [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 141 to 192.168.1.1 port 51613 EAP-Message = 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 EAP-Message = 0xb0c10bdf7d58306a9b62f457869be27e0500f12bb5bdbf451afcd037f43bd26db19169f9fd88a6ab8f49783d3718a97908838502011a8b6cfea38002e6929816030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef848cecfc2e7b808098bf84e7 Finished request 12. Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=142, length=504 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 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 EAP-Message = 0xe7a57986710efcfc4c87d5daa8c9e57292d7fc06324a5c9514030100010116030100301f8b8695534b9e5059868824088b6b50fb57e4ae4d76a54d50fe14c4d910a047333a7283b801af9c4d4e13f099a69731 State = 0x875ef5ef848cecfc2e7b808098bf84e7 Message-Authenticator = 0x2cb898076400770fe76af77290be72ad +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 210 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 142 to 192.168.1.1 port 51613 EAP-Message = 0x01d30041190014030100010116030100304aa72c29e07f288b27c9757847361856d837dfa1597b9b70a472868613c0e57c6aeabb62bc74213e66ce9f3b8c71372c Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef838decfc2e7b808098bf84e7 Finished request 13. Going to the next request Waking up in 0.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=143, length=172 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d300061900 State = 0x875ef5ef838decfc2e7b808098bf84e7 Message-Authenticator = 0xcbd51d9812f6ea993b2cdaa65257bad3 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 211 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS ++[eap] returns handled Sending Access-Challenge of id 143 to 192.168.1.1 port 51613 EAP-Message = 0x01d4002b19001703010020041fb43e0d821ee4e6a3ad13fcd8e9c7dbaafee323649aca7b2cec59cd801c68 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef828aecfc2e7b808098bf84e7 Finished request 14. Going to the next request Waking up in 0.8 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=144, length=209 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d4002b19001703010020e61ddec60f6634dfc4d8916569b5557050dbd8bb13e5b43aa8876c1412131dc4 State = 0x875ef5ef828aecfc2e7b808098bf84e7 Message-Authenticator = 0x72fbb6e79e9723b4e4249f0ccb5288f4 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 212 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Identity - marissa [peap] Got tunnled request EAP-Message = 0x02d4000c016d617269737361 server (null) { PEAP: Got tunneled identity of marissa PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02d4000c016d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 212 length 12 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01d500211a01d5001c105a006210091e79875516bcc506f31d426d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x35553ec335802422c9a068176c68b0f3 [peap] Got tunneled reply RADIUS code 11 Auth-Type := Accept Reply-Message = "You have been authenticated" EAP-Message = 0x01d500211a01d5001c105a006210091e79875516bcc506f31d426d617269737361 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x35553ec335802422c9a068176c68b0f3 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 144 to 192.168.1.1 port 51613 EAP-Message = 0x01d5004b19001703010040f734b814e992a33c3b3311f90afde0d4c88ae45a298f85d4768b05935c466effba4689a5ee56076b6019271b6db57fc65617b408fd6c91abe8cb633a3a9ec7f0 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef818becfc2e7b808098bf84e7 Finished request 15. Going to the next request Waking up in 0.7 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=145, length=273 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d5006b190017030100608559783cf65541fb1d74641e711205e60a8e1d73407ab24dc57d7c0fb2d598b2c280d33d462cf885d63f211f01218275f3f50edd03776fdbcd695edd3cacc5b432b7799775d0c2aca8909d461a4c516d47ae2ede547bee2080254ef9c82c5fa1 State = 0x875ef5ef818becfc2e7b808098bf84e7 Message-Authenticator = 0x34ffa9ed4cbb6b19f3d6ee92322dd30d +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 213 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunnled request EAP-Message = 0x02d500421a02d5003d318d26d3c49c9b923c0a6682d944e11680000000000000000061b07678bd2b09c66f581fc223cf6fad825afaeeb3cc4289006d617269737361 server (null) { PEAP: Setting User-Name to marissa Sending tunneled request EAP-Message = 0x02d500421a02d5003d318d26d3c49c9b923c0a6682d944e11680000000000000000061b07678bd2b09c66f581fc223cf6fad825afaeeb3cc4289006d617269737361 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "marissa" State = 0x35553ec335802422c9a068176c68b0f3 server inner-tunnel { +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop ++[unix] returns notfound [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 213 length 66 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated rlm_ldap: Entering ldap_groupcmp() [files] expand: ou=ou,o=org -> ou=ou,o=org [files] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details [files] expand: (uid=%{Stripped-User-Name:-%{User-Name}}) -> (uid=marissa) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) rlm_ldap: ldap_release_conn: Release Id: 0 [files] expand: (|(&(objectClass=GroupOfNames)(member=%{check:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn}))) -> (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: performing search in cn=Corporate Wireless Network,ou=ou,o=org, with filter (|(&(objectClass=GroupOfNames)(member=cn\3dMarissa\2cou\3dou\2co\3dorg))(&(objectClass=GroupOfUniqueNames)(uniquemember=))) rlm_ldap::ldap_groupcmp: User found in group cn=Corporate Wireless Network,ou=ou,o=org rlm_ldap: ldap_release_conn: Release Id: 0 [files] users: Matched entry DEFAULT at line 3 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Told to do MS-CHAPv2 for marissa with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\325E=691 R=1" EAP-Message = 0x04d50004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 Auth-Type := Accept Reply-Message = "You have been authenticated" MS-CHAP-Error = "\325E=691 R=1" EAP-Message = 0x04d50004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 145 to 192.168.1.1 port 51613 EAP-Message = 0x01d6002b19001703010020946bece6e75fec0abfb94ed139e8380bdfc202f605b2e47fc0ca9f8a39c5fd14 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x875ef5ef8088ecfc2e7b808098bf84e7 Finished request 16. Going to the next request Waking up in 0.6 seconds. rad_recv: Access-Request packet from host 192.168.1.1 port 51613, id=146, length=209 User-Name = "marissa" NAS-Identifier = "RAD_Test" Called-Station-Id = "00-1A-8C-29-A2-C1:RAD_Test" NAS-Port-Type = Wireless-802.11 NAS-Port = 1 Calling-Station-Id = "E4-CE-8F-92-53-B8" Connect-Info = "CONNECT 54Mbps 802.11g" Framed-MTU = 1400 EAP-Message = 0x02d6002b190017030100208bdfdde268ced2025b254d8bbaf95a0af9265088b91e9665be43606b1f465d1f State = 0x875ef5ef8088ecfc2e7b808098bf84e7 Message-Authenticator = 0x65d036d8cbec5c856f7b714d49656ebd +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "marissa", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 214 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Received EAP-TLV response. [peap] Had sent TLV failure. User was rejected earlier in this session. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> marissa attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 17 for 1 seconds Going to the next request Waking up in 0.6 seconds. Cleaning up request 0 ID 129 with timestamp +27 Waking up in 0.1 seconds. Cleaning up request 1 ID 130 with timestamp +27 Cleaning up request 2 ID 131 with timestamp +27 Cleaning up request 3 ID 132 with timestamp +27 Waking up in 0.1 seconds. Sending delayed reject for request 17 Sending Access-Reject of id 146 to 192.168.1.1 port 51613 EAP-Message = 0x04d60004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 1.7 seconds. Cleaning up request 4 ID 133 with timestamp +29 Cleaning up request 5 ID 134 with timestamp +29 Cleaning up request 6 ID 135 with timestamp +29 Cleaning up request 7 ID 136 with timestamp +29 Waking up in 1.0 seconds. Cleaning up request 8 ID 137 with timestamp +29 Waking up in 0.9 seconds.

...

...

"Teague, Christopher J." <Chris.Teague@mybrighthouse.com> 4/9/2015 07:31 AM >>> Hi Brian,

If you are using FR to proxy off authentication requests to ESD you'll want to look at using the Universal Password plugin (feature of eDirectory) and then configure FR to use NMAS to connect to your eDirectory instance. Within ldap configuration, look for: # Set to yes if you have eDirectory and want to use the universal # password mechanism. edir = yes Modify the port you connect to eDirectory if needed (I've seen 636 used in the past). This will permit FR to obtain the cleartext password from eDirectory so the MS-CHAPv2 one way has can be compared against what the 802.1x EAP client is sending. Right now the user is sending the one way hash and you do not have anything to compare it to on the directory side. Chris Teague

rlm_ldap: performing search in ou=ou,o=org, with filter (uid=marissa) [ldap] Error reading Universal Password.Return Code = 80

This may be why you're not having any luck? And Novell helpfully has this article about error 80: https://www.novell.com/support/kb/doc.php?id=7009740 But I also see that you are not connecting to the eDirectory server with LDAPS, which is a requirement for Universal Password, so it's possible the policy refuses to let you have the password, or the Universal Password attribute is not set for the user. Stefan Paetow Moonshot Industry & Research Liaison Coordinator t: +44 (0)1235 822 125 gpg: 0x3FCE5142 xmpp: stefanp@jabber.dev.ja.net skype: stefan.paetow.janet Lumen House, Library Avenue, Harwell Oxford, Didcot, OX11 0SG jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Collections and Janet Ltd. is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under Company No. number 2881024, VAT No. GB 197 0632 86. The registered office is: Lumen House, Library Avenue, Harwell, Didcot, Oxfordshire, OX11 0SG. T 01235 822200.