freeradius 3 - wifi eap authentication with many Calling-station-id
Hi, i have FR 3 with mysql. There is no problem with one Calling-station-id - to wifi connects only with correct mac address. If i add new calling station id - no one authenticate. Is it possible to use more that one Calling-station-id? Thanks, Max (8) Received Access-Request Id 18 from 10.122.0.249:34692 to 10.250.0.89:1812 length 312 (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) User-Name = "6696" (8) State = 0xcbcd84becdca9dacd4f4ff79700755f2 (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400151" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) EAP-Message = 0x0207005e1900170303005347ebd30c192c0babeb6419ce6032bfaeb4e0918d9de607b49e6799da14f82658dc3d02f3e5989e1a07fd06fd09eacf152e87ee60baca2ff6c7c171f93f8bb93cf8a862b0f196cfafd11e39c69455139e4c5419 (8) Message-Authenticator = 0x25eb770a21eb5a60de3ca56f0b906f63 (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) [preprocess] = ok (8) eap: Peer sent EAP Response (code 2) ID 7 length 94 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x1f3ac4431f3dde51 (8) eap: Finished EAP session with state 0xcbcd84becdca9dac (8) eap: Previous EAP request found for state 0xcbcd84becdca9dac, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) eap_peap: Setting User-Name to 6696 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "6696" (8) eap_peap: State = 0x1f3ac4431f3dde519eae5f0eeffc795b (8) eap_peap: Service-Type = Framed-User (8) eap_peap: Framed-MTU = 1400 (8) eap_peap: NAS-Port-Id = "wlan3" (8) eap_peap: NAS-Port-Type = Wireless-802.11 (8) eap_peap: Acct-Session-Id = "82400151" (8) eap_peap: Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) eap_peap: Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) eap_peap: Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) eap_peap: NAS-Identifier = "MikroTik" (8) eap_peap: NAS-IP-Address = 10.122.0.249 (8) eap_peap: Event-Timestamp = "Jul 25 2018 19:49:36 MSK" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0207003f1a0207003a31afa7e13313bb19ccd6a1da23ff37f5f000000000000000000ab6ae29d5f022051dcdf872befccba2dee354235cea2fc80036363936 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "6696" (8) State = 0x1f3ac4431f3dde519eae5f0eeffc795b (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400151" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-5C-8D-4E-45-26-7E-82-40-00-00-00-00-00-A5" (8) Calling-Station-Id = "5C-8D-4E-45-26-7E" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) Event-Timestamp = "Jul 25 2018 19:49:36 MSK" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) foreach &control:Calling-Station-Id { (8) } # foreach &control:Calling-Station-Id = noop (8) [mschap] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 63 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) sql: EXPAND %{User-Name} (8) sql: --> 6696 (8) sql: SQL-User-Name set to '6696' rlm_sql (sql): Reserved connection (3) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: User found in radcheck table (8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: User not found in any groups rlm_sql (sql): Released connection (3) (8) [sql] = noop (8) [expiration] = noop (8) [logintime] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x1f3ac4431f3dde51 (8) eap: Finished EAP session with state 0x1f3ac4431f3dde51 (8) eap: Previous EAP request found for state 0x1f3ac4431f3dde51, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: 6696 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 7 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT {
On Jul 25, 2018, at 12:53 PM, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
i have FR 3 with mysql. There is no problem with one Calling-station-id - to wifi connects only with correct mac address. If i add new calling station id - no one authenticate.
That's not what the debug log shows.
Is it possible to use more that one Calling-station-id?
Yes.
(8) Calling-Station-Id = "5C-8D-4E-45-26-7E"
Only one Calling-Station-Id.
/etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: 6696 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject
You didn't tell FreeRADIUS what the users "known good" password was. Fix that, and it will work. Alan DeKok.
Debug with the problem Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/always including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/always including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" logfile = "/var/log/freeradius/sqllog.sql" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } instantiate { } # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 10.1.26-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 10.123.0.249 (home.gw) to global clients list rlm_sql (10.123.0.249): Client "home.gw" (sql) added rlm_sql (sql): Adding client 10.122.0.249 (home2.gw) to global clients list rlm_sql (10.122.0.249): Client "home2.gw" (sql) added rlm_sql (sql): Released connection (0) rlm_sql (sql): Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = yes use_tunneled_reply = no proxy_tunneled_request_as_eap = no virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 56722 Listening on proxy address :: port 58582 Ready to process requests (0) Received Accounting-Request Id 118 from 10.122.0.249:51678 to 10.250.0.89:1813 length 144 (0) Service-Type = Framed-User (0) NAS-Port-Id = "wlan3" (0) NAS-Port-Type = Wireless-802.11 (0) User-Name = "D0-B1-28-39-46-A1" (0) Acct-Session-Id = "82400162" (0) Calling-Station-Id = "D0-B1-28-39-46-A1" (0) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (0) Acct-Authentic = Local (0) Acct-Status-Type = Start (0) NAS-Identifier = "MikroTik" (0) Acct-Delay-Time = 0 (0) NAS-IP-Address = 10.122.0.249 (0) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (0) preacct { (0) [preprocess] = ok (0) policy acct_unique { (0) update request { (0) Tmp-String-9 := "ai:" (0) } # update request = noop (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (0) EXPAND %{hex:&Class} (0) --> (0) EXPAND ^%{hex:&Tmp-String-9} (0) --> ^61693a (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (0) else { (0) update request { (0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (0) --> 0a4a25a388f63fe98a974a832d3ac3af (0) &Acct-Unique-Session-Id := 0a4a25a388f63fe98a974a832d3ac3af (0) } # update request = noop (0) } # else = noop (0) } # policy acct_unique = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "D0-B1-28-39-46-A1", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) [files] = noop (0) } # preacct = ok (0) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (0) accounting { (0) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (0) detail: --> /var/log/freeradius/radacct/10.122.0.249/detail-20180725 (0) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.122.0.249/detail-20180725 (0) detail: EXPAND %t (0) detail: --> Wed Jul 25 23:43:25 2018 (0) [detail] = ok (0) [unix] = ok (0) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (0) sql: --> type.start.query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND %{User-Name} (0) sql: --> D0-B1-28-39-46-A1 (0) sql: SQL-User-Name set to 'D0-B1-28-39-46-A1' (0) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (0) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('82400162', '0a4a25a388f63fe98a974a832d3ac3af', 'D0-B1-28-39-46-A1', '', '10.122.0.249', 'wlan3', 'Wireless-802.11', FROM_UNIXTIME(1532551405), FROM_UNIXTIME(1532551405), NULL, '0', 'Local', '', '', '0', '0', 'CE-2D-E0-12-71-BA:HOT', 'D0-B1-28-39-46-A1', '', 'Framed-User', '', '') (0) sql: EXPAND /var/log/freeradius/sqllog.sql (0) sql: --> /var/log/freeradius/sqllog.sql (0) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('82400162', '0a4a25a388f63fe98a974a832d3ac3af', 'D0-B1-28-39-46-A1', '', '10.122.0.249', 'wlan3', 'Wireless-802.11', FROM_UNIXTIME(1532551405), FROM_UNIXTIME(1532551405), NULL, '0', 'Local', '', '', '0', '0', 'CE-2D-E0-12-71-BA:HOT', 'D0-B1-28-39-46-A1', '', 'Framed-User', '', '') (0) sql: rlm_sql_mysql: ERROR 1062 (Duplicate entry '0' for key 'PRIMARY'): 23000 (0) sql: SQL query returned: need alt query (0) sql: Trying next query... (0) sql: EXPAND UPDATE radacct SET acctstarttime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), connectinfo_start = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (0) sql: --> UPDATE radacct SET acctstarttime = FROM_UNIXTIME(1532551405), acctupdatetime = FROM_UNIXTIME(1532551405), connectinfo_start = '' WHERE AcctUniqueId = '0a4a25a388f63fe98a974a832d3ac3af' (0) sql: EXPAND /var/log/freeradius/sqllog.sql (0) sql: --> /var/log/freeradius/sqllog.sql (0) sql: Executing query: UPDATE radacct SET acctstarttime = FROM_UNIXTIME(1532551405), acctupdatetime = FROM_UNIXTIME(1532551405), connectinfo_start = '' WHERE AcctUniqueId = '0a4a25a388f63fe98a974a832d3ac3af' rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0 (0) sql: SQL query returned: success (0) sql: 0 record(s) updated (0) sql: No additional queries configured rlm_sql (sql): Released connection (1) rlm_sql (sql): Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (0) [sql] = noop (0) [exec] = noop (0) attr_filter.accounting_response: EXPAND %{User-Name} (0) attr_filter.accounting_response: --> D0-B1-28-39-46-A1 (0) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (0) [attr_filter.accounting_response] = updated (0) } # accounting = updated (0) Sent Accounting-Response Id 118 from 10.250.0.89:1813 to 10.122.0.249:51678 length 0 (0) Finished request (0) Cleaning up request packet ID 118 with timestamp +13 Ready to process requests (1) Received Access-Request Id 119 from 10.122.0.249:48501 to 10.250.0.89:1812 length 209 (1) Service-Type = Framed-User (1) Framed-MTU = 1400 (1) User-Name = "6696" (1) NAS-Port-Id = "wlan3" (1) NAS-Port-Type = Wireless-802.11 (1) Acct-Session-Id = "82400163" (1) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (1) Calling-Station-Id = "D0-B1-28-39-46-A1" (1) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (1) EAP-Message = 0x020000090136363936 (1) Message-Authenticator = 0xc9e4d7317cd5782fb54142db69c29a8a (1) NAS-Identifier = "MikroTik" (1) NAS-IP-Address = 10.122.0.249 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) [preprocess] = ok (1) eap: Peer sent EAP Response (code 2) ID 0 length 9 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 1 length 22 (1) eap: EAP session adding &reply:State = 0x6a2c6baa6a2d6f4f (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 119 from 10.250.0.89:1812 to 10.122.0.249:48501 length 0 (1) EAP-Message = 0x010100160410f6a0b181c185c41634f6248bc7509ed5 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x6a2c6baa6a2d6f4f871cb3433272f84e (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 120 from 10.122.0.249:36886 to 10.250.0.89:1812 length 224 (2) Service-Type = Framed-User (2) Framed-MTU = 1400 (2) User-Name = "6696" (2) State = 0x6a2c6baa6a2d6f4f871cb3433272f84e (2) NAS-Port-Id = "wlan3" (2) NAS-Port-Type = Wireless-802.11 (2) Acct-Session-Id = "82400163" (2) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (2) Calling-Station-Id = "D0-B1-28-39-46-A1" (2) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (2) EAP-Message = 0x020100060319 (2) Message-Authenticator = 0x7a3afcfdef95df966b6fe8fc61d034b9 (2) NAS-Identifier = "MikroTik" (2) NAS-IP-Address = 10.122.0.249 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) [preprocess] = ok (2) eap: Peer sent EAP Response (code 2) ID 1 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) sql: EXPAND %{User-Name} (2) sql: --> 6696 (2) sql: SQL-User-Name set to '6696' rlm_sql (sql): Reserved connection (2) (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (2) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (2) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (2) sql: User found in radcheck table (2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (2) sql: --> SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (2) sql: User not found in any groups rlm_sql (sql): Released connection (2) (2) [sql] = noop (2) foreach &control:Calling-Station-Id { (2) } # foreach &control:Calling-Station-Id = noop (2) [expiration] = noop (2) [logintime] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x6a2c6baa6a2d6f4f (2) eap: Finished EAP session with state 0x6a2c6baa6a2d6f4f (2) eap: Previous EAP request found for state 0x6a2c6baa6a2d6f4f, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new EAP-TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 2 length 6 (2) eap: EAP session adding &reply:State = 0x6a2c6baa6b2e724f (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 120 from 10.250.0.89:1812 to 10.122.0.249:36886 length 0 (2) EAP-Message = 0x010200061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x6a2c6baa6b2e724f871cb3433272f84e (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 121 from 10.122.0.249:35876 to 10.250.0.89:1812 length 393 (3) Service-Type = Framed-User (3) Framed-MTU = 1400 (3) User-Name = "6696" (3) State = 0x6a2c6baa6b2e724f871cb3433272f84e (3) NAS-Port-Id = "wlan3" (3) NAS-Port-Type = Wireless-802.11 (3) Acct-Session-Id = "82400163" (3) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (3) Calling-Station-Id = "D0-B1-28-39-46-A1" (3) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (3) EAP-Message = 0x020200af1980000000a516030100a00100009c0303ed8edffe1a6f0f79df7a3ac9346e8b8a6408563815c314df3d94b41d917869c900003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01 (3) Message-Authenticator = 0x67e0c550c65d12762c33be0725162a32 (3) NAS-Identifier = "MikroTik" (3) NAS-IP-Address = 10.122.0.249 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) [preprocess] = ok (3) eap: Peer sent EAP Response (code 2) ID 2 length 175 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x6a2c6baa6b2e724f (3) eap: Finished EAP session with state 0x6a2c6baa6b2e724f (3) eap: Previous EAP request found for state 0x6a2c6baa6b2e724f, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 165 bytes (3) eap_peap: Got complete TLS record (165 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: <<< recv TLS 1.2 [length 00a0] (3) eap_peap: TLS_accept: SSLv3/TLS read client hello (3) eap_peap: >>> send TLS 1.2 [length 003d] (3) eap_peap: TLS_accept: SSLv3/TLS write server hello (3) eap_peap: >>> send TLS 1.2 [length 02ee] (3) eap_peap: TLS_accept: SSLv3/TLS write certificate (3) eap_peap: >>> send TLS 1.2 [length 014d] (3) eap_peap: TLS_accept: SSLv3/TLS write key exchange (3) eap_peap: >>> send TLS 1.2 [length 0004] (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: In SSL Handshake Phase (3) eap_peap: In SSL Accept mode (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 3 length 1004 (3) eap: EAP session adding &reply:State = 0x6a2c6baa682f724f (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 121 from 10.250.0.89:1812 to 10.122.0.249:35876 length 0 (3) EAP-Message = 0x010303ec19c000000490160303003d020000390303fbd3e19b8840a3afd87867c5d48c8bd68ad27122416495965afab61d00d0458400c030000011ff01000100000b0004030001020017000016030302ee0b0002ea0002e70002e4308202e0308201c8a003020102020900f0b83dc1e9c4cf75300d0609 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x6a2c6baa682f724f871cb3433272f84e (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 122 from 10.122.0.249:37477 to 10.250.0.89:1812 length 224 (4) Service-Type = Framed-User (4) Framed-MTU = 1400 (4) User-Name = "6696" (4) State = 0x6a2c6baa682f724f871cb3433272f84e (4) NAS-Port-Id = "wlan3" (4) NAS-Port-Type = Wireless-802.11 (4) Acct-Session-Id = "82400163" (4) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (4) Calling-Station-Id = "D0-B1-28-39-46-A1" (4) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (4) EAP-Message = 0x020300061900 (4) Message-Authenticator = 0xf39e211f37a031bee5276eacfeeb88a3 (4) NAS-Identifier = "MikroTik" (4) NAS-IP-Address = 10.122.0.249 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) [preprocess] = ok (4) eap: Peer sent EAP Response (code 2) ID 3 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x6a2c6baa682f724f (4) eap: Finished EAP session with state 0x6a2c6baa682f724f (4) eap: Previous EAP request found for state 0x6a2c6baa682f724f, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 4 length 180 (4) eap: EAP session adding &reply:State = 0x6a2c6baa6928724f (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 122 from 10.250.0.89:1812 to 10.122.0.249:37477 length 0 (4) EAP-Message = 0x010400b41900a7f661e6fbde7e1a426a995c996173fe24a9f250f690986e658b294ff576b16f61a491878208da2802ea8bc9d7b13e7db164613d5189ef9ff083623d2ed2df80eafba3a14914979d09a5d913dfa8db9eb3b4168bac85195a93922b93caa5bcedad6f77bf1ec9519398467e452abefe4202 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x6a2c6baa6928724f871cb3433272f84e (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 123 from 10.122.0.249:53833 to 10.250.0.89:1812 length 354 (5) Service-Type = Framed-User (5) Framed-MTU = 1400 (5) User-Name = "6696" (5) State = 0x6a2c6baa6928724f871cb3433272f84e (5) NAS-Port-Id = "wlan3" (5) NAS-Port-Type = Wireless-802.11 (5) Acct-Session-Id = "82400163" (5) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (5) Calling-Station-Id = "D0-B1-28-39-46-A1" (5) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (5) EAP-Message = 0x0204008819800000007e160303004610000042410499bf8f887c5067bca25253896ad9265c0d0f21223ea43fcab631fca2bb1e43a00dc3e980ddc7650d4066d90758f4dde6c17d2832d323ab237328d1b4a0813a3614030300010116030300280000000000000000589054f8032709ca585858f1e8fea6 (5) Message-Authenticator = 0x491499d0da12d5e01f7b20e70b123c20 (5) NAS-Identifier = "MikroTik" (5) NAS-IP-Address = 10.122.0.249 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) [preprocess] = ok (5) eap: Peer sent EAP Response (code 2) ID 4 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x6a2c6baa6928724f (5) eap: Finished EAP session with state 0x6a2c6baa6928724f (5) eap: Previous EAP request found for state 0x6a2c6baa6928724f, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: TLS_accept: SSLv3/TLS write server done (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (5) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS read finished (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: SSLv3/TLS write finished (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: SSL Connection Established (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 5 length 57 (5) eap: EAP session adding &reply:State = 0x6a2c6baa6e29724f (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 123 from 10.250.0.89:1812 to 10.122.0.249:53833 length 0 (5) EAP-Message = 0x0105003919001403030001011603030028c8ec29e499910e490a80cc56cac7bb50b44601ba8de9078c8ad590a663bd0e1fb47412a23245b5f1 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x6a2c6baa6e29724f871cb3433272f84e (5) Finished request Waking up in 4.8 seconds. (6) Received Access-Request Id 124 from 10.122.0.249:53201 to 10.250.0.89:1812 length 224 (6) Service-Type = Framed-User (6) Framed-MTU = 1400 (6) User-Name = "6696" (6) State = 0x6a2c6baa6e29724f871cb3433272f84e (6) NAS-Port-Id = "wlan3" (6) NAS-Port-Type = Wireless-802.11 (6) Acct-Session-Id = "82400163" (6) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (6) Calling-Station-Id = "D0-B1-28-39-46-A1" (6) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (6) EAP-Message = 0x020500061900 (6) Message-Authenticator = 0x271a03828ca505a1a26a0215d21244f9 (6) NAS-Identifier = "MikroTik" (6) NAS-IP-Address = 10.122.0.249 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) [preprocess] = ok (6) eap: Peer sent EAP Response (code 2) ID 5 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x6a2c6baa6e29724f (6) eap: Finished EAP session with state 0x6a2c6baa6e29724f (6) eap: Previous EAP request found for state 0x6a2c6baa6e29724f, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 6 length 40 (6) eap: EAP session adding &reply:State = 0x6a2c6baa6f2a724f (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Sent Access-Challenge Id 124 from 10.250.0.89:1812 to 10.122.0.249:53201 length 0 (6) EAP-Message = 0x010600281900170303001dc8ec29e499910e4a5a0b1f1c70586c2c059308ddf67e7e5ea7fa5bdae4 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x6a2c6baa6f2a724f871cb3433272f84e (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 125 from 10.122.0.249:48081 to 10.250.0.89:1812 length 258 (7) Service-Type = Framed-User (7) Framed-MTU = 1400 (7) User-Name = "6696" (7) State = 0x6a2c6baa6f2a724f871cb3433272f84e (7) NAS-Port-Id = "wlan3" (7) NAS-Port-Type = Wireless-802.11 (7) Acct-Session-Id = "82400163" (7) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (7) Calling-Station-Id = "D0-B1-28-39-46-A1" (7) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (7) EAP-Message = 0x020600281900170303001d00000000000000010565e586506439137cacc02cb077ae3705e1483773 (7) Message-Authenticator = 0xb8f777a7f4386b809dbd756dcc12acd5 (7) NAS-Identifier = "MikroTik" (7) NAS-IP-Address = 10.122.0.249 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) [preprocess] = ok (7) eap: Peer sent EAP Response (code 2) ID 6 length 40 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x6a2c6baa6f2a724f (7) eap: Finished EAP session with state 0x6a2c6baa6f2a724f (7) eap: Previous EAP request found for state 0x6a2c6baa6f2a724f, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - 6696 (7) eap_peap: Got inner identity '6696' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x020600090136363936 (7) eap_peap: Setting User-Name to 6696 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x020600090136363936 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "6696" (7) eap_peap: Service-Type = Framed-User (7) eap_peap: Framed-MTU = 1400 (7) eap_peap: NAS-Port-Id = "wlan3" (7) eap_peap: NAS-Port-Type = Wireless-802.11 (7) eap_peap: Acct-Session-Id = "82400163" (7) eap_peap: Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (7) eap_peap: Calling-Station-Id = "D0-B1-28-39-46-A1" (7) eap_peap: Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (7) eap_peap: NAS-Identifier = "MikroTik" (7) eap_peap: NAS-IP-Address = 10.122.0.249 (7) eap_peap: Event-Timestamp = "Jul 25 2018 23:43:26 MSK" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020600090136363936 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "6696" (7) Service-Type = Framed-User (7) Framed-MTU = 1400 (7) NAS-Port-Id = "wlan3" (7) NAS-Port-Type = Wireless-802.11 (7) Acct-Session-Id = "82400163" (7) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (7) Calling-Station-Id = "D0-B1-28-39-46-A1" (7) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (7) NAS-Identifier = "MikroTik" (7) NAS-IP-Address = 10.122.0.249 (7) Event-Timestamp = "Jul 25 2018 23:43:26 MSK" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) foreach &control:Calling-Station-Id { (7) } # foreach &control:Calling-Station-Id = noop (7) [mschap] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 6 length 9 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 7 length 43 (7) eap: EAP session adding &reply:State = 0x657ffcba6578e6ca (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x0107002b1a0107002610812ce54b4e1052fedb2906377bf6cf95667265657261646975732d332e302e3132 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x657ffcba6578e6ca26e18b8644117efc (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: EAP-Message = 0x0107002b1a0107002610812ce54b4e1052fedb2906377bf6cf95667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x657ffcba6578e6ca26e18b8644117efc (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: EAP-Message = 0x0107002b1a0107002610812ce54b4e1052fedb2906377bf6cf95667265657261646975732d332e302e3132 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0x657ffcba6578e6ca26e18b8644117efc (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 7 length 74 (7) eap: EAP session adding &reply:State = 0x6a2c6baa6c2b724f (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Sent Access-Challenge Id 125 from 10.250.0.89:1812 to 10.122.0.249:48081 length 0 (7) EAP-Message = 0x0107004a1900170303003fc8ec29e499910e4b9e294706a9421d248bf2bb9ef53c637a5a29b15881e23e6879f0b7ffe46286e9901fbb4e86a7910a73d07d2594a589ad53d6ab5880d082 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x6a2c6baa6c2b724f871cb3433272f84e (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 126 from 10.122.0.249:56649 to 10.250.0.89:1812 length 312 (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) User-Name = "6696" (8) State = 0x6a2c6baa6c2b724f871cb3433272f84e (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400163" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (8) Calling-Station-Id = "D0-B1-28-39-46-A1" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) EAP-Message = 0x0207005e190017030300530000000000000002ca7949873c29d4d2ccd121e608393850e67fd8877d49f7d8b1f2422c453a62b41b38e7e6e37257945a3b23d7a4a0ee9f7f868228157adfd14fde336c01b978b2c6526d1302d549ae0755a2 (8) Message-Authenticator = 0xab262d203125e1dc22ff2ad03ef38a95 (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) [preprocess] = ok (8) eap: Peer sent EAP Response (code 2) ID 7 length 94 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x657ffcba6578e6ca (8) eap: Finished EAP session with state 0x6a2c6baa6c2b724f (8) eap: Previous EAP request found for state 0x6a2c6baa6c2b724f, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0207003f1a0207003a312c5fbd71575c994373f62d2a4ede20d30000000000000000aaae70b023273a07626ccf5f2fd6f3d44724aa0170518a240036363936 (8) eap_peap: Setting User-Name to 6696 (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0207003f1a0207003a312c5fbd71575c994373f62d2a4ede20d30000000000000000aaae70b023273a07626ccf5f2fd6f3d44724aa0170518a240036363936 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "6696" (8) eap_peap: State = 0x657ffcba6578e6ca26e18b8644117efc (8) eap_peap: Service-Type = Framed-User (8) eap_peap: Framed-MTU = 1400 (8) eap_peap: NAS-Port-Id = "wlan3" (8) eap_peap: NAS-Port-Type = Wireless-802.11 (8) eap_peap: Acct-Session-Id = "82400163" (8) eap_peap: Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (8) eap_peap: Calling-Station-Id = "D0-B1-28-39-46-A1" (8) eap_peap: Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) eap_peap: NAS-Identifier = "MikroTik" (8) eap_peap: NAS-IP-Address = 10.122.0.249 (8) eap_peap: Event-Timestamp = "Jul 25 2018 23:43:26 MSK" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0207003f1a0207003a312c5fbd71575c994373f62d2a4ede20d30000000000000000aaae70b023273a07626ccf5f2fd6f3d44724aa0170518a240036363936 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "6696" (8) State = 0x657ffcba6578e6ca26e18b8644117efc (8) Service-Type = Framed-User (8) Framed-MTU = 1400 (8) NAS-Port-Id = "wlan3" (8) NAS-Port-Type = Wireless-802.11 (8) Acct-Session-Id = "82400163" (8) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (8) Calling-Station-Id = "D0-B1-28-39-46-A1" (8) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (8) NAS-Identifier = "MikroTik" (8) NAS-IP-Address = 10.122.0.249 (8) Event-Timestamp = "Jul 25 2018 23:43:26 MSK" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) foreach &control:Calling-Station-Id { (8) } # foreach &control:Calling-Station-Id = noop (8) [mschap] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 63 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) sql: EXPAND %{User-Name} (8) sql: --> 6696 (8) sql: SQL-User-Name set to '6696' rlm_sql (sql): Reserved connection (3) (8) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (8) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '6696' ORDER BY id (8) sql: User found in radcheck table (8) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (8) sql: --> SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = '6696' ORDER BY priority (8) sql: User not found in any groups rlm_sql (sql): Released connection (3) rlm_sql (sql): Need 3 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (8) [sql] = noop (8) [expiration] = noop (8) [logintime] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0x657ffcba6578e6ca (8) eap: Finished EAP session with state 0x657ffcba6578e6ca (8) eap: Previous EAP request found for state 0x657ffcba6578e6ca, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: 6696 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject (8) } # authenticate = reject (8) eap: Sending EAP Failure (code 4) ID 7 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) sql: EXPAND .query (8) sql: --> .query (8) sql: Using query template 'query' rlm_sql (sql): Reserved connection (4) (8) sql: EXPAND %{User-Name} (8) sql: --> 6696 (8) sql: SQL-User-Name set to '6696' (8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (8) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '6696', '', 'Access-Reject', '2018-07-25 23:43:26') (8) sql: EXPAND /var/log/freeradius/sqllog.sql (8) sql: --> /var/log/freeradius/sqllog.sql (8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '6696', '', 'Access-Reject', '2018-07-25 23:43:26') (8) sql: SQL query returned: success (8) sql: 1 record(s) updated rlm_sql (sql): Released connection (4) (8) [sql] = ok (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> 6696 (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "\007E=691 R=1 C=cacd7d148423ae79faa4516654f7935c V=3 M=Authentication failed" (8) EAP-Message = 0x04070004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=cacd7d148423ae79faa4516654f7935c V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04070004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "\007E=691 R=1 C=cacd7d148423ae79faa4516654f7935c V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04070004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 8 length 46 (8) eap: EAP session adding &reply:State = 0x6a2c6baa6d24724f (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) session-state: Saving cached attributes (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (8) Sent Access-Challenge Id 126 from 10.250.0.89:1812 to 10.122.0.249:56649 length 0 (8) EAP-Message = 0x0108002e19001703030023c8ec29e499910e4c64465128037bdb26b5384cc533f2dd51f6fd82ecf7aa86faadfb2c (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x6a2c6baa6d24724f871cb3433272f84e (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 127 from 10.122.0.249:53422 to 10.250.0.89:1812 length 264 (9) Service-Type = Framed-User (9) Framed-MTU = 1400 (9) User-Name = "6696" (9) State = 0x6a2c6baa6d24724f871cb3433272f84e (9) NAS-Port-Id = "wlan3" (9) NAS-Port-Type = Wireless-802.11 (9) Acct-Session-Id = "82400163" (9) Acct-Multi-Session-Id = "CE-2D-E0-12-71-BA-D0-B1-28-39-46-A1-82-40-00-00-00-00-00-AE" (9) Calling-Station-Id = "D0-B1-28-39-46-A1" (9) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (9) EAP-Message = 0x0208002e190017030300230000000000000003948be373949aee0d206e6a1acb1b5aff5d77e1297ba6d9d05f47ee (9) Message-Authenticator = 0xe84acdfb6dbf99d41967dd2cf36ef8a0 (9) NAS-Identifier = "MikroTik" (9) NAS-IP-Address = 10.122.0.249 (9) Restoring &session-state (9) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication" (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) [preprocess] = ok (9) eap: Peer sent EAP Response (code 2) ID 8 length 46 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x6a2c6baa6d24724f (9) eap: Finished EAP session with state 0x6a2c6baa6d24724f (9) eap: Previous EAP request found for state 0x6a2c6baa6d24724f, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 8 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Post-Auth-Type REJECT { (9) sql: EXPAND .query (9) sql: --> .query (9) sql: Using query template 'query' rlm_sql (sql): Reserved connection (0) (9) sql: EXPAND %{User-Name} (9) sql: --> 6696 (9) sql: SQL-User-Name set to '6696' (9) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (9) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '6696', '', 'Access-Reject', '2018-07-25 23:43:26') (9) sql: EXPAND /var/log/freeradius/sqllog.sql (9) sql: --> /var/log/freeradius/sqllog.sql (9) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '6696', '', 'Access-Reject', '2018-07-25 23:43:26') (9) sql: SQL query returned: success (9) sql: 1 record(s) updated rlm_sql (sql): Released connection (0) (9) [sql] = ok (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> 6696 (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) (9) Discarding duplicate request from client home2.gw port 53422 - ID: 127 due to delayed response Waking up in 0.3 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 127 from 10.250.0.89:1812 to 10.122.0.249:53422 length 44 (9) EAP-Message = 0x04080004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. (10) Received Accounting-Request Id 128 from 10.122.0.249:55370 to 10.250.0.89:1813 length 192 (10) Service-Type = Framed-User (10) NAS-Port-Id = "wlan3" (10) NAS-Port-Type = Wireless-802.11 (10) User-Name = "D0-B1-28-39-46-A1" (10) Acct-Session-Id = "82400162" (10) Calling-Station-Id = "D0-B1-28-39-46-A1" (10) Called-Station-Id = "CE-2D-E0-12-71-BA:HOT" (10) Acct-Authentic = Local (10) Acct-Status-Type = Stop (10) Acct-Terminate-Cause = Port-Error (10) Acct-Session-Time = 1 (10) Acct-Input-Octets = 0 (10) Acct-Input-Gigawords = 0 (10) Acct-Input-Packets = 0 (10) Acct-Output-Octets = 1558 (10) Acct-Output-Gigawords = 0 (10) Acct-Output-Packets = 10 (10) NAS-Identifier = "MikroTik" (10) Acct-Delay-Time = 0 (10) NAS-IP-Address = 10.122.0.249 (10) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (10) preacct { (10) [preprocess] = ok (10) policy acct_unique { (10) update request { (10) Tmp-String-9 := "ai:" (10) } # update request = noop (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (10) EXPAND %{hex:&Class} (10) --> (10) EXPAND ^%{hex:&Tmp-String-9} (10) --> ^61693a (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> 0a4a25a388f63fe98a974a832d3ac3af (10) &Acct-Unique-Session-Id := 0a4a25a388f63fe98a974a832d3ac3af (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "D0-B1-28-39-46-A1", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) [files] = noop (10) } # preacct = ok (10) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/freeradius/radacct/10.122.0.249/detail-20180725 (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.122.0.249/detail-20180725 (10) detail: EXPAND %t (10) detail: --> Wed Jul 25 23:43:27 2018 (10) [detail] = ok (10) [unix] = ok (10) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query} (10) sql: --> type.stop.query (10) sql: Using query template 'query' rlm_sql (sql): Reserved connection (5) (10) sql: EXPAND %{User-Name} (10) sql: --> D0-B1-28-39-46-A1 (10) sql: SQL-User-Name set to 'D0-B1-28-39-46-A1' (10) sql: EXPAND UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' (10) sql: --> UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1532551407), acctsessiontime = 1, acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '1558', acctterminatecause = 'Port-Error', connectinfo_stop = '' WHERE AcctUniqueId = '0a4a25a388f63fe98a974a832d3ac3af' (10) sql: EXPAND /var/log/freeradius/sqllog.sql (10) sql: --> /var/log/freeradius/sqllog.sql (10) sql: Executing query: UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1532551407), acctsessiontime = 1, acctinputoctets = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '1558', acctterminatecause = 'Port-Error', connectinfo_stop = '' WHERE AcctUniqueId = '0a4a25a388f63fe98a974a832d3ac3af' rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0 (10) sql: SQL query returned: success (10) sql: 0 record(s) updated (10) sql: Trying next query... (10) sql: EXPAND INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}') (10) sql: --> INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime,acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('82400162', '0a4a25a388f63fe98a974a832d3ac3af', 'D0-B1-28-39-46-A1', '', '10.122.0.249', 'wlan3', 'Wireless-802.11', FROM_UNIXTIME(1532551407 - 1), FROM_UNIXTIME(1532551407), FROM_UNIXTIME(1532551407), 1, 'Local', '', '', '0' << 32 | '0', '0' << 32 | '1558', 'CE-2D-E0-12-71-BA:HOT', 'D0-B1-28-39-46-A1', 'Port-Error', 'Framed-User', '', '') (10) sql: EXPAND /var/log/freeradius/sqllog.sql (10) sql: --> /var/log/freeradius/sqllog.sql (10) sql: Executing query: INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('82400162', '0a4a25a388f63fe98a974a832d3ac3af', 'D0-B1-28-39-46-A1', '', '10.122.0.249', 'wlan3', 'Wireless-802.11', FROM_UNIXTIME(1532551407 - 1), FROM_UNIXTIME(1532551407), FROM_UNIXTIME(1532551407), 1, 'Local', '', '', '0' << 32 | '0', '0' << 32 | '1558', 'CE-2D-E0-12-71-BA:HOT', 'D0-B1-28-39-46-A1', 'Port-Error', 'Framed-User', '', '') (10) sql: rlm_sql_mysql: ERROR 1062 (Duplicate entry '0' for key 'PRIMARY'): 23000 (10) sql: SQL query returned: need alt query (10) sql: No additional queries configured rlm_sql (sql): Released connection (5) rlm_sql (sql): Need 2 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (8), 1 of 24 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10 (10) [sql] = noop (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> D0-B1-28-39-46-A1 (10) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (10) [attr_filter.accounting_response] = updated (10) } # accounting = updated (10) Sent Accounting-Response Id 128 from 10.250.0.89:1813 to 10.122.0.249:55370 length 0 (10) Finished request 2018-07-25 22:33 GMT+03:00 Alan DeKok <aland@deployingradius.com>:
i have FR 3 with mysql. There is no problem with one Calling-station-id
On Jul 25, 2018, at 12:53 PM, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote: -
to wifi connects only with correct mac address. If i add new calling station id - no one authenticate.
That's not what the debug log shows.
Is it possible to use more that one Calling-station-id?
Yes.
(8) Calling-Station-Id = "5C-8D-4E-45-26-7E"
Only one Calling-Station-Id.
/etc/freeradius/3.0/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password (8) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password (8) mschap: Creating challenge hash with username: 6696 (8) mschap: Client is using MS-CHAPv2 (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication (8) mschap: ERROR: MS-CHAP2-Response is incorrect (8) [mschap] = reject
You didn't tell FreeRADIUS what the users "known good" password was.
Fix that, and it will work.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
On Jul 25, 2018, at 4:46 PM, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
Debug with the problem
I didn't tell you to post more debug output. I told you to tell FreeRADIUS what the users password is. If you don't know what that means, ask a question. If you do know what it means, then you know how to fix the problem. All of this is documented in the FAQ and in many examples. Alan DeKok.
hi i don't know how to tell FreeRADIUS user password. I tried to use unlang in autorize section authorize { preprocess sql foreach &control:Calling-Station-Id { if (&request:Calling-Station-Id == "%{Foreach-Variable-0}") { ok } eap { ok = return } but without success. And i didn' find in docs any examples with multiple Calling-station-id. 2018-07-26 0:05 GMT+03:00 Alan DeKok <aland@deployingradius.com>:
On Jul 25, 2018, at 4:46 PM, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
Debug with the problem
I didn't tell you to post more debug output.
I told you to tell FreeRADIUS what the users password is.
If you don't know what that means, ask a question.
If you do know what it means, then you know how to fix the problem.
All of this is documented in the FAQ and in many examples.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
i'm guessing you dont have fall-through enabled in your radcheck table? alan On 26 July 2018 at 07:38, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
hi i don't know how to tell FreeRADIUS user password. I tried to use unlang in autorize section
authorize { preprocess sql foreach &control:Calling-Station-Id { if (&request:Calling-Station-Id == "%{Foreach-Variable-0}") { ok } eap { ok = return } but without success.
And i didn' find in docs any examples with multiple Calling-station-id.
2018-07-26 0:05 GMT+03:00 Alan DeKok <aland@deployingradius.com>:
On Jul 25, 2018, at 4:46 PM, Maksim Bessonov <
wrote:
Debug with the problem
I didn't tell you to post more debug output.
I told you to tell FreeRADIUS what the users password is.
If you don't know what that means, ask a question.
If you do know what it means, then you know how to fix the problem.
All of this is documented in the FAQ and in many examples.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
maksim.bessonov2@gmail.com> - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
i added to radcheck table and result i the same - with many calling-station-id no authentication MariaDB [radius]> select * from radcheck; +----+----------+--------------------+----+-------------------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------------------+ | 15 | 6696 | Calling-Station-Id | == | 5C-8D-4E-45-26-7E | | 7 | 6696 | Cleartext-Password | := | 6696 | | 11 | 6696 | Calling-Station-Id | == | D0-B1-28-39-46-A1 | | 14 | 6696 | Fall-Through | = | 1 | +----+----------+--------------------+----+-------------------+ 4 rows in set (0.00 sec) 2018-07-26 14:12 GMT+03:00 Alan Buxey <alan.buxey@gmail.com>:
i'm guessing you dont have fall-through enabled in your radcheck table?
alan
On 26 July 2018 at 07:38, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
hi i don't know how to tell FreeRADIUS user password. I tried to use unlang in autorize section
authorize { preprocess sql foreach &control:Calling-Station-Id { if (&request:Calling-Station-Id == "%{Foreach-Variable-0}") { ok } eap { ok = return } but without success.
And i didn' find in docs any examples with multiple Calling-station-id.
2018-07-26 0:05 GMT+03:00 Alan DeKok <aland@deployingradius.com>:
On Jul 25, 2018, at 4:46 PM, Maksim Bessonov <
wrote:
Debug with the problem
I didn't tell you to post more debug output.
I told you to tell FreeRADIUS what the users password is.
If you don't know what that means, ask a question.
If you do know what it means, then you know how to fix the problem.
All of this is documented in the FAQ and in many examples.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
maksim.bessonov2@gmail.com> - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
On 26/07/18 12:43, Maksim Bessonov wrote:
i added to radcheck table and result i the same - with many calling-station-id no authentication
MariaDB [radius]> select * from radcheck; +----+----------+--------------------+----+-------------------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------------------+ | 15 | 6696 | Calling-Station-Id | == | 5C-8D-4E-45-26-7E |
I believe this works Calling-Station-Id =~ 5C-8D-4E-45-26-7E|D0-B1-28-39-46-A1 Note that 'op' is different.
Thank you for yor help! 2018-07-27 15:34 GMT+03:00 Dom Latter <freeradius-users@latter.org>:
On 26/07/18 12:43, Maksim Bessonov wrote:
i added to radcheck table and result i the same - with many calling-station-id no authentication
MariaDB [radius]> select * from radcheck; +----+----------+--------------------+----+-------------------+ | id | username | attribute | op | value | +----+----------+--------------------+----+-------------------+ | 15 | 6696 | Calling-Station-Id | == | 5C-8D-4E-45-26-7E |
I believe this works Calling-Station-Id =~ 5C-8D-4E-45-26-7E|D0-B1-28-39-46-A1
Note that 'op' is different. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list /users.html
On Jul 26, 2018, at 2:38 AM, Maksim Bessonov <maksim.bessonov2@gmail.com> wrote:
hi i don't know how to tell FreeRADIUS user password. I tried to use unlang in autorize section
Did I say to do that? Did I not say it was fine to have multiple Calling-Station-ID? Did the debug log show there was only ONE Calling-Station-Id? You seem insistent on ignoring every piece of advice you're given. Which makes me wonder why you're asking questions here. I'll give it one last try. Read my guide on http://deployingradius.com Follow the instructions. It WILL work. And don't post any more questions here unless you can show that you've read the docs and followed the instructions. Alan DeKok.
participants (4)
-
Alan Buxey -
Alan DeKok -
Dom Latter -
Maksim Bessonov