WPA-EAP TLS can not connect from ubuntu but succeeded on windows 10
Hello. I am trying to test EAP-TLS configuration. I want our robots can connect to any of our charging station's private wifi with centralized authentication. When i try to connect from ubuntu 16.04, the password entry dialog is always popping up upon connection trials, (same as on ubuntu 18.04, cent os 7) but connected well from windows 10 and eapol_test succeeded on ubuntu. What is the problem? Any help would be appreciated.
Password entry dialog message Authentication required by wireless network Passwords or encryption keys are required to access the wireless network "xxx" Identity: user@example.org Private key password: whatever
Network Configuration: FreeRadius <=> LTE Dongle - Wireless Router <= wifi (WPA2 Enterprise) => ubuntu 16.04 [ EC2 ] [ Charging Station ] [Robot]
- Server : FreeRadius 3.0.16 (ubuntu 18.04 LTS) - Router: TP link AC1200 - Supplicant : Ubuntu 16.04 LTS,
Certificates using "make" command In 'certs' folder
log (password entry dialog case): ubuntu@ip-10-10-1-238:~$ sudo radiusd -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/files including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client station-1 { ipaddr = 223.171.35.38 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client sunho-notebook { ipaddr = 211.171.128.253 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } instantiate { } # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.crt" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (0) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 145 (0) User-Name = "user@example.org" (0) NAS-IP-Address = 192.168.0.10 (0) Called-Station-Id = "704f573b432b" (0) Calling-Station-Id = "00266645d5f9" (0) NAS-Identifier = "704f573b432b" (0) NAS-Port = 105 (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) EAP-Message = 0x020000150175736572406578616d706c652e6f7267 (0) Message-Authenticator = 0x7cb7dbef28985f7dae3fc4d27c9f1091 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "example.org" for User-Name = "user@example.org" (0) suffix: No such realm "example.org" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_tls to process data (0) eap_tls: Initiating new EAP-TLS session (0) eap_tls: Setting verify mode to require certificate from client (0) eap_tls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0x203db85d203cb507 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (0) EAP-Message = 0x010100060d20 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x203db85d203cb507f96591a7e11a91ca (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 1 with timestamp +21 (1) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 320 (1) User-Name = "user@example.org" (1) NAS-IP-Address = 192.168.0.10 (1) Called-Station-Id = "704f573b432b" (1) Calling-Station-Id = "00266645d5f9" (1) NAS-Identifier = "704f573b432b" (1) NAS-Port = 105 (1) Framed-MTU = 1400 (1) State = 0x203db85d203cb507f96591a7e11a91ca (1) NAS-Port-Type = Wireless-802.11 (1) EAP-Message = 0x020100b20d0016030100a7010000a30303929fa29484d5b8f299850cd11dfce2f03149c1f2d7567abd6763a934ee658b78000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000042000b0004030001 (1) Message-Authenticator = 0xf676531d97de6df2673b533cc1b2f384 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "example.org" for User-Name = "user@example.org" (1) suffix: No such realm "example.org" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 178 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x203db85d203cb507 (1) eap: Finished EAP session with state 0x203db85d203cb507 (1) eap: Previous EAP request found for state 0x203db85d203cb507, released from the list (1) eap: Peer sent packet with method EAP TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Continuing EAP-TLS (1) eap_tls: Got final TLS record fragment (172 bytes) (1) eap_tls: WARNING: Total received TLS record fragments (172 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_tls: [eaptls verify] = ok (1) eap_tls: Done initial handshake (1) eap_tls: (other): before SSL initialization (1) eap_tls: TLS_accept: before SSL initialization (1) eap_tls: TLS_accept: before SSL initialization (1) eap_tls: <<< recv TLS 1.2 [length 00a7] (1) eap_tls: TLS_accept: SSLv3/TLS read client hello (1) eap_tls: >>> send TLS 1.2 [length 003d] (1) eap_tls: TLS_accept: SSLv3/TLS write server hello (1) eap_tls: >>> send TLS 1.2 [length 0bd3] (1) eap_tls: TLS_accept: SSLv3/TLS write certificate (1) eap_tls: >>> send TLS 1.2 [length 014d] (1) eap_tls: TLS_accept: SSLv3/TLS write key exchange (1) eap_tls: >>> send TLS 1.2 [length 00c2] (1) eap_tls: TLS_accept: SSLv3/TLS write certificate request (1) eap_tls: >>> send TLS 1.2 [length 0004] (1) eap_tls: TLS_accept: SSLv3/TLS write server done (1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_tls: In SSL Handshake Phase (1) eap_tls: In SSL Accept mode (1) eap_tls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1014 (1) eap: EAP session adding &reply:State = 0x203db85d213fb507 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (1) EAP-Message = 0x010203f60dc000000e3c160303003d02000039030378027514c9ef6433c7e832cce2ef4f3b624fa6271365982a446a8fb8e51dc8ca00c030000011ff01000100000b000403000102001700001603030bd30b000bcf000bcc0004de308204da308202c2a003020102020101300d06092a864886f70d0101 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x203db85d213fb507f96591a7e11a91ca (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 1 with timestamp +21 (2) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (2) User-Name = "user@example.org" (2) NAS-IP-Address = 192.168.0.10 (2) Called-Station-Id = "704f573b432b" (2) Calling-Station-Id = "00266645d5f9" (2) NAS-Identifier = "704f573b432b" (2) NAS-Port = 105 (2) Framed-MTU = 1400 (2) State = 0x203db85d213fb507f96591a7e11a91ca (2) NAS-Port-Type = Wireless-802.11 (2) EAP-Message = 0x020200060d00 (2) Message-Authenticator = 0x194e9ff186c1efce1d73cfac53b03359 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "example.org" for User-Name = "user@example.org" (2) suffix: No such realm "example.org" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x203db85d213fb507 (2) eap: Finished EAP session with state 0x203db85d213fb507 (2) eap: Previous EAP request found for state 0x203db85d213fb507, released from the list (2) eap: Peer sent packet with method EAP TLS (13) (2) eap: Calling submodule eap_tls to process data (2) eap_tls: Continuing EAP-TLS (2) eap_tls: Peer ACKed our handshake fragment (2) eap_tls: [eaptls verify] = request (2) eap_tls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1014 (2) eap: EAP session adding &reply:State = 0x203db85d223eb507 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (2) EAP-Message = 0x010303f60dc000000e3c62da6c24d6b4cc2a815534cf52a3dc6119f546592d7f997683bdabd3869852f7c8d154a2e8211246c7d623fee8238c239d558ccea05e2339bd46ddb83336a8a5ee846e1bfaa61a03f0f140656fbcbfd9762b345e9c9b67d9c79002c95a6b963fbf22aedf8634d74a2b03a6f9b4 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x203db85d223eb507f96591a7e11a91ca (2) Finished request Waking up in 4.9 seconds. (2) Cleaning up request packet ID 1 with timestamp +21 (3) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (3) User-Name = "user@example.org" (3) NAS-IP-Address = 192.168.0.10 (3) Called-Station-Id = "704f573b432b" (3) Calling-Station-Id = "00266645d5f9" (3) NAS-Identifier = "704f573b432b" (3) NAS-Port = 105 (3) Framed-MTU = 1400 (3) State = 0x203db85d223eb507f96591a7e11a91ca (3) NAS-Port-Type = Wireless-802.11 (3) EAP-Message = 0x020300060d00 (3) Message-Authenticator = 0x85f8ff9f5f4076652471f97e44644c7b (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "example.org" for User-Name = "user@example.org" (3) suffix: No such realm "example.org" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop (3) [expiration] = noop (3) [logintime] = noop (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x203db85d223eb507 (3) eap: Finished EAP session with state 0x203db85d223eb507 (3) eap: Previous EAP request found for state 0x203db85d223eb507, released from the list (3) eap: Peer sent packet with method EAP TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Continuing EAP-TLS (3) eap_tls: Peer ACKed our handshake fragment (3) eap_tls: [eaptls verify] = request (3) eap_tls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1014 (3) eap: EAP session adding &reply:State = 0x203db85d2339b507 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (3) EAP-Message = 0x010403f60dc000000e3c786fed10a59ec759d78d22d762157a691ce1b46949b6b286ce1a2f630f6a52538243a46529a82525bb5e435a7c25c4f9bd57274db9bfdefb2394bdf9a3a1c0b5bc8efd93093507d3a6230110b342e84713cbd42bed4772bc370ebfb4754993a8bb04356bdddae41190f69eda35 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x203db85d2339b507f96591a7e11a91ca (3) Finished request Waking up in 4.9 seconds. (3) Cleaning up request packet ID 1 with timestamp +21 (4) Received Access-Request Id 1 from 223.171.35.38:6820 to 10.10.1.238:1812 length 148 (4) User-Name = "user@example.org" (4) NAS-IP-Address = 192.168.0.10 (4) Called-Station-Id = "704f573b432b" (4) Calling-Station-Id = "00266645d5f9" (4) NAS-Identifier = "704f573b432b" (4) NAS-Port = 105 (4) Framed-MTU = 1400 (4) State = 0x203db85d2339b507f96591a7e11a91ca (4) NAS-Port-Type = Wireless-802.11 (4) EAP-Message = 0x020400060d00 (4) Message-Authenticator = 0xdda20d09b0b29e18eac85ecda72b7248 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "example.org" for User-Name = "user@example.org" (4) suffix: No such realm "example.org" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: No EAP Start, assuming it's an on-going EAP conversation (4) [eap] = updated (4) [files] = noop (4) [expiration] = noop (4) [logintime] = noop (4) [pap] = noop (4) } # authorize = updated (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x203db85d2339b507 (4) eap: Finished EAP session with state 0x203db85d2339b507 (4) eap: Previous EAP request found for state 0x203db85d2339b507, released from the list (4) eap: Peer sent packet with method EAP TLS (13) (4) eap: Calling submodule eap_tls to process data (4) eap_tls: Continuing EAP-TLS (4) eap_tls: Peer ACKed our handshake fragment (4) eap_tls: [eaptls verify] = request (4) eap_tls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 642 (4) eap: EAP session adding &reply:State = 0x203db85d2438b507 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 1 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0 (4) EAP-Message = 0x010502820d8000000e3c71c6b50111980c295cf90e036e227db46ae622d3711ce48fc32e0a676f4ff6926904675fbdd650c39cafcc659b4a46fdf8dff8db5f24fce0c3247e045c15485106eb29012d1cb774b362063becd08942125c5b13edde160303014d0c0001490300174104cab9a9380bec6ab4e0 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x203db85d2438b507f96591a7e11a91ca (4) Finished request Waking up in 4.9 seconds. (4) Cleaning up request packet ID 1 with timestamp +21 Ready to process requests ----> Best regards, Sun-ho Lee
On 9 Jan 2019, at 08:53, Sunho Lee <shlee@wonikrobotics.com> wrote:
When i try to connect from ubuntu 16.04, the password entry dialog is always popping up upon connection trials, (same as on ubuntu 18.04, cent os 7)
You've misconfigured your client. EAP-TLS doesn't use passwords. Adam Bishop gpg: E75B 1F92 6407 DFDF 9F1C BF10 C993 2504 6609 D460 jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.
1. Before connection trial, i have created wifi connection using Network Manager GUI as below: - NetworkManager - Create Wifi Connection - Security Tab Security: WPA & WPA2 Enterprise Authentication: TLS Identity: user@example.org (client.cnf default) User certificate: client.pem or client.p12 CA certificate: ca.pem Private key: client.p12 Private key password: whatever (client.cnf default) 2. Connection trial started and after my log was printed on radius server, dialog like below was popped up Title: Authentication required by wireless network Contents: Passwords or encryption keys are required to access the wireless network "xxx" Identity: user@example.org Private key password: ********* (whatever?) [Cancel] [Connect] 3. I click the "connect" button (whether re-typing Private key password or not) then the above(#2) was repeated about 1~2 times Best regards, Sun-ho Lee 2019년 1월 9일 (수) 오후 7:57, Adam Bishop <Adam.Bishop@jisc.ac.uk>님이 작성:
On 9 Jan 2019, at 08:53, Sunho Lee <shlee@wonikrobotics.com> wrote:
When i try to connect from ubuntu 16.04, the password entry dialog is always popping up upon connection trials, (same as on ubuntu 18.04, cent os 7)
You've misconfigured your client. EAP-TLS doesn't use passwords.
Adam Bishop
gpg: E75B 1F92 6407 DFDF 9F1C BF10 C993 2504 6609 D460
jisc.ac.uk
Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.
Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Jan 9, 2019, at 7:46 AM, Sunho Lee <shlee@wonikrobotics.com> wrote:
1. Before connection trial, i have created wifi connection using Network Manager GUI as below: - NetworkManager - Create Wifi Connection - Security Tab Security: WPA & WPA2 Enterprise Authentication: TLS Identity: user@example.org (client.cnf default) User certificate: client.pem or client.p12 CA certificate: ca.pem Private key: client.p12 Private key password: whatever (client.cnf default)
2. Connection trial started and after my log was printed on radius server, dialog like below was popped up Title: Authentication required by wireless network Contents: Passwords or encryption keys are required to access the wireless network "xxx" Identity: user@example.org Private key password: ********* (whatever?)
This is the password to the client.pem file.
[Cancel] [Connect]
3. I click the "connect" button (whether re-typing Private key password or not) then the above(#2) was repeated about 1~2 times
Well, there isn't much we can do. The problem isn't FreeRADIUS. It's on the client side. You'll have to ask the Network Manager people how their software works. Alan DeKok.
run a debug when connecting from either from windows or eapol_test and check for any difference in output. alan On Wed, 9 Jan 2019 at 12:52, Alan DeKok <aland@deployingradius.com> wrote:
On Jan 9, 2019, at 7:46 AM, Sunho Lee <shlee@wonikrobotics.com> wrote:
1. Before connection trial, i have created wifi connection using Network Manager GUI as below: - NetworkManager - Create Wifi Connection - Security Tab Security: WPA & WPA2 Enterprise Authentication: TLS Identity: user@example.org (client.cnf default) User certificate: client.pem or client.p12 CA certificate: ca.pem Private key: client.p12 Private key password: whatever (client.cnf default)
2. Connection trial started and after my log was printed on radius server, dialog like below was popped up Title: Authentication required by wireless network Contents: Passwords or encryption keys are required to access the wireless network "xxx" Identity: user@example.org Private key password: ********* (whatever?)
This is the password to the client.pem file.
[Cancel] [Connect]
3. I click the "connect" button (whether re-typing Private key password or not) then the above(#2) was repeated about 1~2 times
Well, there isn't much we can do. The problem isn't FreeRADIUS. It's on the client side. You'll have to ask the Network Manager people how their software works.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Here is the differences.
1. line 755
- Fail(Ubuntu Supplicant)
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Got final TLS record fragment (172 bytes)
(1) eap_tls: WARNING: Total received TLS record fragments (172 bytes),
does not equal indicated TLS record length (0 bytes)
(1) eap_tls: [eaptls verify] = ok
(1) eap_tls: Done initial handshake
(1) eap_tls: (other): before SSL initialization
- Success(Win10 Supplicant)
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Peer indicated complete TLS record size will be 156 bytes
(1) eap_tls: Got complete TLS record (156 bytes)
(1) eap_tls: [eaptls verify] = length included
(1) eap_tls: (other): before SSL initialization
2. line 1016~
- Fail(Ubuntu Supplicant)
..Cleaning up request .... After that, nothing more happens.
- Success(Win10 Supplicant)
(4) Cleaning up request packet ID 0 with timestamp +11
(5) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 1644
(5) User-Name = "user@example.org"
(5) NAS-IP-Address = 192.168.0.10
(5) Called-Station-Id = "704f573b432b"
(5) Calling-Station-Id = "701ce7ea7851"
(5) NAS-Identifier = "704f573b432b"
(5) NAS-Port = 67
(5) Framed-MTU = 1400
(5) State = 0x8e60f0b08a65fd23980d5523ba0ace4e
(5) NAS-Port-Type = Wireless-802.11
(5) EAP-Message =
0x020505d40dc000000863160303082b0b0005d90005d60005d3308205cf308203b7a003020102020102300d06092a864886f70d01010b0500308193310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d65776865726531153013060355040a0c
(5) Message-Authenticator = 0xdc7992ea8fa49c9e68d4a1c633b8e72a
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(5) suffix: No such realm "example.org"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 1492
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5) [eap] = updated
(5) [files] = noop
(5) [expiration] = noop
(5) [logintime] = noop
(5) [pap] = noop
(5) } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x8e60f0b08a65fd23
(5) eap: Finished EAP session with state 0x8e60f0b08a65fd23
(5) eap: Previous EAP request found for state 0x8e60f0b08a65fd23,
released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: Continuing EAP-TLS
(5) eap_tls: Peer indicated complete TLS record size will be 2147 bytes
(5) eap_tls: Expecting 2 TLS record fragments
(5) eap_tls: Got first TLS record fragment (1482 bytes). Peer
indicated more fragments to follow
(5) eap_tls: [eaptls verify] = first fragment
(5) eap_tls: ACKing Peer's TLS record fragment
(5) eap_tls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 6 length 6
(5) eap: EAP session adding &reply:State = 0x8e60f0b08b66fd23
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(5) EAP-Message = 0x010600060d00
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(5) Finished request
Waking up in 4.9 seconds.
(5) Cleaning up request packet ID 0 with timestamp +12
(6) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 817
(6) User-Name = "user@example.org"
(6) NAS-IP-Address = 192.168.0.10
(6) Called-Station-Id = "704f573b432b"
(6) Calling-Station-Id = "701ce7ea7851"
(6) NAS-Identifier = "704f573b432b"
(6) NAS-Port = 67
(6) Framed-MTU = 1400
(6) State = 0x8e60f0b08b66fd23980d5523ba0ace4e
(6) NAS-Port-Type = Wireless-802.11
(6) EAP-Message =
0x0206029f0d00a06ba6d17bb2b23af5592f7869f3944354812009850aa10a1000004241040621ae2eeb0e919d182c58c1a0b6418597140a8126dfb072d53a71a3aedc4f5bb694102ce204a9feabf416d66b3d1774c9b0008f8e29b7e3604c92229068d59d0f00020404010200986749316e430239a36533
(6) Message-Authenticator = 0x26d43af12e94d7f008ff4f11f2778327
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(6) suffix: No such realm "example.org"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 671
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6) [eap] = updated
(6) [files] = noop
(6) [expiration] = noop
(6) [logintime] = noop
(6) [pap] = noop
(6) } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x8e60f0b08b66fd23
(6) eap: Finished EAP session with state 0x8e60f0b08b66fd23
(6) eap: Previous EAP request found for state 0x8e60f0b08b66fd23,
released from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: Continuing EAP-TLS
(6) eap_tls: Got final TLS record fragment (665 bytes)
(6) eap_tls: [eaptls verify] = ok
(6) eap_tls: Done initial handshake
(6) eap_tls: TLS_accept: SSLv3/TLS write server done
(6) eap_tls: <<< recv TLS 1.2 [length 05dd]
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls: TLS-Cert-Serial := "9b8908b10ad4e429"
(6) eap_tls: TLS-Cert-Expiration := "240107092124Z"
(6) eap_tls: TLS-Cert-Subject :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls: TLS-Cert-Issuer :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls: TLS-Cert-Common-Name := "Example Certificate Authority"
(6) eap_tls: Creating attributes from certificate OIDs
(6) eap_tls: TLS-Client-Cert-Serial := "02"
(6) eap_tls: TLS-Client-Cert-Expiration := "200108092126Z"
(6) eap_tls: TLS-Client-Cert-Subject := "/C=FR/ST=Radius/O=Example
Inc./CN=user@example.org/emailAddress=user@example.org"
(6) eap_tls: TLS-Client-Cert-Issuer :=
"/C=FR/ST=Radius/L=Somewhere/O=Example
Inc./emailAddress=admin@example.org/CN=Example Certificate Authority"
(6) eap_tls: TLS-Client-Cert-Common-Name := "user@example.org"
(6) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
Client Authentication"
(6) eap_tls: TLS_accept: SSLv3/TLS read client certificate
(6) eap_tls: <<< recv TLS 1.2 [length 0046]
(6) eap_tls: TLS_accept: SSLv3/TLS read client key exchange
(6) eap_tls: <<< recv TLS 1.2 [length 0208]
(6) eap_tls: TLS_accept: SSLv3/TLS read certificate verify
(6) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec
(6) eap_tls: <<< recv TLS 1.2 [length 0010]
(6) eap_tls: TLS_accept: SSLv3/TLS read finished
(6) eap_tls: >>> send TLS 1.2 [length 0001]
(6) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec
(6) eap_tls: >>> send TLS 1.2 [length 0010]
(6) eap_tls: TLS_accept: SSLv3/TLS write finished
(6) eap_tls: (other): SSL negotiation finished successfully
(6) eap_tls: SSL Connection Established
(6) eap_tls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 7 length 61
(6) eap: EAP session adding &reply:State = 0x8e60f0b08867fd23
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 0 from 10.10.1.238:1812 to
223.171.35.38:6820 length 0
(6) EAP-Message =
0x0107003d0d800000003314030300010116030300281e6973755166a35a1fdc4433b72897e6f4492a9e36844c22d602e69b19ce4d21245dd0780f1ddd8e
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x8e60f0b08867fd23980d5523ba0ace4e
(6) Finished request
Waking up in 4.9 seconds.
(6) Cleaning up request packet ID 0 with timestamp +12
(7) Received Access-Request Id 0 from 223.171.35.38:6820 to
10.10.1.238:1812 length 148
(7) User-Name = "user@example.org"
(7) NAS-IP-Address = 192.168.0.10
(7) Called-Station-Id = "704f573b432b"
(7) Calling-Station-Id = "701ce7ea7851"
(7) NAS-Identifier = "704f573b432b"
(7) NAS-Port = 67
(7) Framed-MTU = 1400
(7) State = 0x8e60f0b08867fd23980d5523ba0ace4e
(7) NAS-Port-Type = Wireless-802.11
(7) EAP-Message = 0x020700060d00
(7) Message-Authenticator = 0x35a41bd0f2f81394fee838c720f96214
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "example.org" for User-Name = "user@example.org"
(7) suffix: No such realm "example.org"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x8e60f0b08867fd23
(7) eap: Finished EAP session with state 0x8e60f0b08867fd23
(7) eap: Previous EAP request found for state 0x8e60f0b08867fd23,
released from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: Continuing EAP-TLS
(7) eap_tls: Peer ACKed our handshake fragment. handshake is finished
(7) eap_tls: [eaptls verify] = success
(7) eap_tls: [eaptls process] = success
(7) eap: Sending EAP Success (code 3) ID 7 length 4
(7) eap: Freeing handler
(7) [eap] = ok
(7) } # authenticate = ok
(7) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(7) post-auth {
(7) update {
(7) No attributes updated
(7) } # update = noop
(7) [exec] = noop
(7) policy remove_reply_message_if_eap {
(7) if (&reply:EAP-Message && &reply:Reply-Message) {
(7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(7) else {
(7) [noop] = noop
(7) } # else = noop
(7) } # policy remove_reply_message_if_eap = noop
(7) } # post-auth = noop
(7) Sent Access-Accept Id 0 from 10.10.1.238:1812 to 223.171.35.38:6820 length 0
(7) MS-MPPE-Recv-Key =
0x6851bd68488149beb6175757297429d2c5fbf2ba7fb9745df4f2803ddc2b8b6f
(7) MS-MPPE-Send-Key =
0x115def9e214dd9a1c76bd12f4f31bfafc118723403846d253703224b9b334733
(7) EAP-Message = 0x03070004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "user@example.org"
(7) Finished request
Waking up in 4.9 seconds.
(7) Cleaning up request packet ID 0 with timestamp +12
Ready to process requests
2019년 1월 10일 (목) 오전 5:07, Alan Buxey <alan.buxey@gmail.com>님이 작성:
>
> run a debug when connecting from either from windows or eapol_test and
> check for any difference in output.
>
> alan
>
> On Wed, 9 Jan 2019 at 12:52, Alan DeKok <aland@deployingradius.com> wrote:
>
> > On Jan 9, 2019, at 7:46 AM, Sunho Lee <shlee@wonikrobotics.com> wrote:
> > >
> > > 1. Before connection trial, i have created wifi connection using
> > > Network Manager GUI as below:
> > > - NetworkManager - Create Wifi Connection - Security Tab
> > > Security: WPA & WPA2 Enterprise
> > > Authentication: TLS
> > > Identity: user@example.org (client.cnf default)
> > > User certificate: client.pem or client.p12
> > > CA certificate: ca.pem
> > > Private key: client.p12
> > > Private key password: whatever (client.cnf default)
> > >
> > > 2. Connection trial started and after my log was printed on radius
> > > server, dialog like below was popped up
> > > Title: Authentication required by wireless network
> > > Contents:
> > > Passwords or encryption keys are required to access the wireless
> > > network "xxx"
> > > Identity: user@example.org
> > > Private key password: ********* (whatever?)
> >
> > This is the password to the client.pem file.
> >
> > > [Cancel] [Connect]
> > >
> > > 3. I click the "connect" button (whether re-typing Private key password
> > or not)
> > > then the above(#2) was repeated about 1~2 times
> >
> > Well, there isn't much we can do. The problem isn't FreeRADIUS. It's
> > on the client side. You'll have to ask the Network Manager people how
> > their software works.
> >
> > Alan DeKok.
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
(주)원익로보틱스
연구개발팀 과장 이 선 호
(13486)경기도 성남시 분당구 판교로255번길 20 원익빌딩 5층
T: 031-8038-9175 M:010-9871-7173 F: 031-8038-9190
www.wonikrobotics.com
On Jan 9, 2019, at 7:51 PM, Sunho Lee <shlee@wonikrobotics.com> wrote:
2. line 1016~ - Fail(Ubuntu Supplicant) ..Cleaning up request .... After that, nothing more happens.
Because the Ubuntu supplicant decides that it doesn't want to continue authenticating. You have to look at the supplicant logs to see what's going on. We can't help you with that. This isn't a FreeRADIUS problem. Alan DeKok.
participants (4)
-
Adam Bishop -
Alan Buxey -
Alan DeKok -
Sunho Lee