Freeradius and DWL-3500AP's
Hey All, Has anyone has any experience using freeradius with the dlink dws-3026 switch and dwl-3500aps? I can't see a way to configure anything on them...no matter what i do the request shows up as the following. rad_recv: Access-Request packet from host 192.170.140.6 port 1032, id=0, length=160 User-Name = "00-1F-F3-BD-A4-4F" User-Password = "NOPASSWORD" NAS-IP-Address = 10.90.90.91 Called-Station-Id = "00-20-B0-EF-BA-F6:TEST" Calling-Station-Id = "00-1F-F3-BD-A4-4F" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" Message-Authenticator = 0xfab0de5e78156ea21d1b56e3537472ff # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok Side note, no matter what, the AP has a dhcp assigned IP and most AP's always show as that 10.90.90.x ip... That's all i ever get from a wireless client...even when on a mac using wpa2 and freeradius setup for ldap, username always shows as mac address...is this a limitation of the dlink equipment or am i doing something wrong? I am going with this is flakey dlink equipment and making me want to go to cisco even more... Any help would be appreciated, thanks.
Maybe it is so called lightweight AP. Product description from D-Link site says that it should be used together with DWS-3024/DWS-3026 wireless control switches. Call vendor for more info. John Corps wrote:
Hey All,
Has anyone has any experience using freeradius with the dlink dws-3026 switch and dwl-3500aps? I can't see a way to configure anything on them...no matter what i do the request shows up as the following.
rad_recv: Access-Request packet from host 192.170.140.6 port 1032, id=0, length=160 User-Name = "00-1F-F3-BD-A4-4F" User-Password = "NOPASSWORD" NAS-IP-Address = 10.90.90.91 Called-Station-Id = "00-20-B0-EF-BA-F6:TEST" Calling-Station-Id = "00-1F-F3-BD-A4-4F" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" Message-Authenticator = 0xfab0de5e78156ea21d1b56e3537472ff # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok
Side note, no matter what, the AP has a dhcp assigned IP and most AP's always show as that 10.90.90.x ip...
That's all i ever get from a wireless client...even when on a mac using wpa2 and freeradius setup for ldap, username always shows as mac address...is this a limitation of the dlink equipment or am i doing something wrong? I am going with this is flakey dlink equipment and making me want to go to cisco even more...
Any help would be appreciated, thanks. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
John Corps wrote:
Has anyone has any experience using freeradius with the dlink dws-3026 switch and dwl-3500aps? I can't see a way to configure anything on them...no matter what i do the request shows up as the following.
Well... ask DLINK how their equipment works. If there's nothing to configure, it's likely because it can't be configured.
Side note, no matter what, the AP has a dhcp assigned IP and most AP's always show as that 10.90.90.x ip...
That's all i ever get from a wireless client...even when on a mac using wpa2 and freeradius setup for ldap, username always shows as mac address...is this a limitation of the dlink equipment or am i doing something wrong? I am going with this is flakey dlink equipment and making me want to go to cisco even more...
Yes. Generally when you pay more for equipment, it's more likely that it works. Alan DeKok.
participants (3)
-
Alan DeKok -
Iliya Peregoudov -
John Corps