Hey All, Has anyone has any experience using freeradius with the dlink dws-3026 switch and dwl-3500aps? I can't see a way to configure anything on them...no matter what i do the request shows up as the following. rad_recv: Access-Request packet from host 192.170.140.6 port 1032, id=0, length=160 User-Name = "00-1F-F3-BD-A4-4F" User-Password = "NOPASSWORD" NAS-IP-Address = 10.90.90.91 Called-Station-Id = "00-20-B0-EF-BA-F6:TEST" Calling-Station-Id = "00-1F-F3-BD-A4-4F" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 11Mbps 802.11b" Message-Authenticator = 0xfab0de5e78156ea21d1b56e3537472ff # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok Side note, no matter what, the AP has a dhcp assigned IP and most AP's always show as that 10.90.90.x ip... That's all i ever get from a wireless client...even when on a mac using wpa2 and freeradius setup for ldap, username always shows as mac address...is this a limitation of the dlink equipment or am i doing something wrong? I am going with this is flakey dlink equipment and making me want to go to cisco even more... Any help would be appreciated, thanks.