segmentation fault caused by sql ?

[vicky]

Mario,

I thought I had that installed, hum...
I'm on fc3, what rpm package(s) should I install for the mysqlclient?

Thaks for your respond!

--Vicky

Mario Alberto Cruz Gartner wrote:

>I'd had a similar "segmentation fault" when i'd try to use the sql
>module and the freeradius installation doesn't include the mysqlclient
>libraries.
>I've installed the libraries on the system, reconfigure, make, make
>install again and it works fine!
>
>On 7/6/05, vicky <vicky at trustive.com> wrote:
>  
>
>>Hi all!
>>
>>I have a segmentation fault and it scares me. I have attached the output
>>of radiusd -X with this e-mail.
>>
>>It is not because the database is not there because when I connect to it
>>"manually" it works.
>>
>>Is is permission issues? Is it a driver problem?
>>
>>Thanks for any help I can get!
>>
>>--Vicky
>>
>>
>>
>>
>>Starting - reading configuration files ...
>>reread_config:  reading radiusd.conf
>>Config:   including file: /opt/freeradius/etc/raddb/proxy.conf
>>Config:   including file: /opt/freeradius/etc/raddb/trs_proxy.conf
>>Config:   including file: /opt/freeradius/etc/raddb/clients.conf
>>Config:   including file: /opt/freeradius/etc/raddb/trs_clients.conf
>>Config:   including file: /opt/freeradius/etc/raddb/snmp.conf
>>Config:   including file: /opt/freeradius/etc/raddb/sqlcounter.conf
>>Config:   including file: /opt/freeradius/etc/raddb/eap.conf
>>Config:   including file: /opt/freeradius/etc/raddb/sql.conf
>> main: prefix = "/opt/freeradius"
>> main: localstatedir = "/opt/freeradius/var"
>> main: logdir = "/opt/freeradius/var/log/radius"
>> main: libdir = "/opt/freeradius/lib"
>> main: radacctdir = "/opt/freeradius/var/log/radius/radacct"
>> main: hostname_lookups = no
>> main: max_request_time = 30
>> main: cleanup_delay = 5
>> main: max_requests = 1024
>> main: delete_blocked_requests = 0
>> main: port = 0
>> main: allow_core_dumps = no
>> main: log_stripped_names = no
>> main: log_file = "/opt/freeradius/var/log/radius/radius.log"
>> main: log_auth = yes
>> main: log_auth_badpass = yes
>> main: log_auth_goodpass = no
>> main: pidfile = "/opt/freeradius/var/run/radiusd/radiusd.pid"
>> main: user = "trustive"
>> main: group = "trustive"
>> main: usercollide = no
>> main: lower_user = "no"
>> main: lower_pass = "no"
>> main: nospace_user = "no"
>> main: nospace_pass = "no"
>> main: checkrad = "/opt/freeradius/sbin/checkrad"
>> main: proxy_requests = yes
>> proxy: retry_delay = 5
>> proxy: retry_count = 3
>> proxy: synchronous = no
>> proxy: default_fallback = yes
>> proxy: dead_time = 120
>> proxy: post_proxy_authorize = no
>> proxy: wake_all_if_all_dead = no
>> security: max_attributes = 200
>> security: reject_delay = 1
>> security: status_server = no
>> main: debug_level = 0
>>read_config_files:  reading dictionary
>>read_config_files:  reading naslist
>>Using deprecated naslist file.  Support for this will go away soon.
>>read_config_files:  reading clients
>>read_config_files:  reading realms
>>radiusd:  entering modules setup
>>Module: Library search path is /opt/freeradius/lib
>>Module: Loaded PAP
>> pap: encryption_scheme = "crypt"
>>Module: Instantiated pap (pap)
>>Module: Loaded CHAP
>>Module: Instantiated chap (chap)
>>Module: Loaded MS-CHAP
>> mschap: use_mppe = yes
>> mschap: require_encryption = no
>> mschap: require_strong = no
>> mschap: with_ntdomain_hack = no
>> mschap: passwd = "(null)"
>> mschap: authtype = "MS-CHAP"
>> mschap: ntlm_auth = "(null)"
>>Module: Instantiated mschap (mschap)
>>Module: Loaded System
>> unix: cache = no
>> unix: passwd = "(null)"
>> unix: shadow = "(null)"
>> unix: group = "(null)"
>> unix: radwtmp = "/opt/freeradius/var/log/radius/radwtmp"
>> unix: usegroup = no
>> unix: cache_reload = 600
>>Module: Instantiated unix (unix)
>>Module: Loaded eap
>> eap: default_eap_type = "md5"
>> eap: timer_expire = 60
>> eap: ignore_unknown_eap_types = no
>> eap: cisco_accounting_username_bug = no
>>rlm_eap: Loaded and initialized type md5
>>rlm_eap: Loaded and initialized type leap
>> gtc: challenge = "Password: "
>> gtc: auth_type = "PAP"
>>rlm_eap: Loaded and initialized type gtc
>> mschapv2: with_ntdomain_hack = no
>>rlm_eap: Loaded and initialized type mschapv2
>>Module: Instantiated eap (eap)
>>Module: Loaded attr_rewrite
>> attr_rewrite: attribute = "User-Name"
>> attr_rewrite: searchfor = "promo.*"
>> attr_rewrite: searchin = "packet"
>> attr_rewrite: replacewith = "%{User-Password}"
>> attr_rewrite: append = no
>> attr_rewrite: ignore_case = no
>> attr_rewrite: new_attribute = no
>> attr_rewrite: max_matches = 10
>>Module: Instantiated attr_rewrite (attr_rewrite)
>>Module: Loaded preprocess
>> preprocess: huntgroups = "/opt/freeradius/etc/raddb/huntgroups"
>> preprocess: hints = "/opt/freeradius/etc/raddb/hints"
>> preprocess: with_ascend_hack = no
>> preprocess: ascend_channels_per_line = 23
>> preprocess: with_ntdomain_hack = no
>> preprocess: with_specialix_jetstream_hack = no
>> preprocess: with_cisco_vsa_hack = no
>>Module: Instantiated preprocess (preprocess)
>>Module: Loaded detail
>> detail: detailfile = "/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d"
>> detail: detailperm = 384
>> detail: dirperm = 493
>> detail: locking = no
>>Module: Instantiated detail (auth_log)
>>Module: Loaded realm
>> realm: format = "prefix"
>> realm: delimiter = "/"
>> realm: ignore_default = yes
>> realm: ignore_null = yes
>>Module: Instantiated realm (prefix)
>> realm: format = "suffix"
>> realm: delimiter = "@"
>> realm: ignore_default = yes
>> realm: ignore_null = yes
>>Module: Instantiated realm (suffix)
>>Module: Loaded files
>> files: usersfile = "/opt/freeradius/etc/raddb/users"
>> files: acctusersfile = "/opt/freeradius/etc/raddb/acct_users"
>> files: preproxy_usersfile = "/opt/freeradius/etc/raddb/preproxy_users"
>> files: compat = "no"
>>Module: Instantiated files (files)
>>Module: Loaded SQL
>> sql: driver = "rlm_sql_mysql"
>> sql: server = "localhost"
>> sql: port = ""
>> sql: login = "root"
>> sql: password = "trustive"
>> sql: radius_db = "trs"
>> sql: acct_table = "radacct"
>> sql: acct_table2 = "radacct"
>> sql: authcheck_table = "radcheck"
>> sql: authreply_table = "radreply"
>> sql: groupcheck_table = "radgroupcheck"
>> sql: groupreply_table = "radgroupreply"
>> sql: usergroup_table = "usergroup"
>> sql: nas_table = "nas"
>> sql: dict_table = "dictionary"
>> sql: sqltrace = yes
>> sql: sqltracefile = "/opt/freeradius/var/log/radius/sqltrace.sql"
>> sql: readclients = no
>> sql: deletestalesessions = yes
>> sql: num_sql_socks = 5
>> sql: sql_user_name = "%{Stripped-User-Name:-%{User-Name}}"
>> sql: default_user_profile = ""
>> sql: query_on_not_found = no
>> sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
>> sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
>> sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
>> sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
>> sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
>> sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress = '%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ? AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets = '%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ? AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress= '%{NAS-IP-Address}'"
>> sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')"
>> sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASIdentifier, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, ClientIPAddress, WISPrLocationId, WISPrLocationName) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Identifier}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0', '%{Client-IP-Address}', '%{WISPr-Location-Id}', '%{WISPr-Location-Name}')"
>> sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
>> sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
>> sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay, ClientIPAddress, WISPrLocationId, WISPrLocationName) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}', '%{Client!
>>    
>>
> -IP-Address}', '%{WISPr-Location-Id}', '%{WISPr-Location-Name}')"
>  
>
>> sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'"
>> sql: connect_failure_retry_delay = 60
>> sql: simul_count_query = ""
>> sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
>> sql: postauth_table = "radpostauth"
>> sql: postauth_query = "INSERT into radpostauth (id, user, pass, session_id, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{Acct-Session-Id}', '%{reply:Packet-Type}', NOW())"
>> sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>>rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
>>rlm_sql (sql): Attempting to connect to root at localhost:/trs
>>rlm_sql (sql): starting 0
>>rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
>>rlm_sql_mysql: Starting connect to MySQL server for #0
>>rlm_sql (sql): Connected new DB handle, #0
>>rlm_sql (sql): starting 1
>>rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
>>rlm_sql_mysql: Starting connect to MySQL server for #1
>>rlm_sql (sql): Connected new DB handle, #1
>>rlm_sql (sql): starting 2
>>rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
>>rlm_sql_mysql: Starting connect to MySQL server for #2
>>rlm_sql (sql): Connected new DB handle, #2
>>rlm_sql (sql): starting 3
>>rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
>>rlm_sql_mysql: Starting connect to MySQL server for #3
>>rlm_sql (sql): Connected new DB handle, #3
>>rlm_sql (sql): starting 4
>>rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
>>rlm_sql_mysql: Starting connect to MySQL server for #4
>>rlm_sql (sql): Connected new DB handle, #4
>>Module: Instantiated sql (sql)
>>
>>
>>-
>>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>
>>    
>>
>
>- 
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>  
>