Regarding on radiusd.conf file

[Christopher Carver]

Make sure you handle the Digest problem first.  This error means you are 
selecting an auth-type of 'digest' for the user's authentication request 
but you don't have the rlm_digest module configured.  Look in 
doc/rlm_digest in the source tree on how to configure this module, what 
it does, etc...

Good luck.

Chris Carver
Pennswoods.net
Network Engineer

raviprakash sunkara wrote:
> Hello Everybody,
>
> I'm working  on openser, recently I install freeradius for "AAA".
>
> By seeing the Documentation from " 
> http://openser.org/docs/openser-radius-1.0.x.html " 
> I followed that.
>
> While testing the  radius server by ' radiusd -X "  its shows
>
> radiusd.conf[1840] unknown Auth-type " Digest" in authenticate section 
> ---> what its means.
>
> And also
>
> By Typing '" radtest 444 444 192.168.2.55 <http://192.168.2.55> 1812 
> radiustest " its shows below one.
>
> Sending Access-Request of id 236 to 192.168.2.55 <http://192.168.2.55> 
> port 1812
>         User-Name = "444"
>         User-Password = "444"
>         NAS-IP-Address = 255.255.255.255 <http://255.255.255.255>
> Re-sending Access-Request of id 236 to 192.168.2.55 
> <http://192.168.2.55> port 1812
>         User-Name = "444"
>         User-Password = "444"
>         NAS-IP-Address = 255.255.255.255 <http://255.255.255.255>
>
> What its means one . Is it error ?
>
> I run this in my box .
> where in my box installed openser , freeradius and radiusclinet-ng..
>
> Please help me and main thing is, Is any mistakes in my english please 
> excuse me..
>
> -- 
> Thanks and Regards with cheers
> Sunkara Ravi Prakash (Voip Developer) ravi.sunkara at hyperion-tech.com 
> <mailto:ravi.sunkara at hyperion-tech.com>
> Hyperion Technology
> www.hyperion-tech.com <http://www.hyperion-tech.com>
> ------------------------------------------------------------------------
>
> - 
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html