Help(1.1.3): How to enable EAP-TTLS?

[tnt at kalik.co.yu]

You can try wpa_supplicant's eapol_test. It should support all EAP types
that wpa_supplicant supports.

Ivan Kalik
Kalik Informatika ISP

Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah at gmail.com> piše:

>Ivan,
>
>Does that mean, EAP-TTLS is supported in FreeRadius Server but not in
>FreeRadius Client?
>
>Does it work if I use some other client which has EAP-TTLS support?
>
>
>Thanks & Regards,
>Govardhana K N
>
>
>On 7/20/07, tnt at kalik.co.yu <tnt at kalik.co.yu> wrote:
>>
>> http://www.freeradius.org/radiusd/man/radeapclient.txt
>>
>> "The EAP-MD5-Password attribute, if present is used to respond to an MD5
>> challenge.
>>
>> No other EAP types are currently supported."
>>
>> Ivan Kalik
>> Kalik Informatika ISP
>>
>>
>>
>> Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah at gmail.com> piše:
>>
>> >Hi,
>> >
>> >I was able to enable EAP-TTLS in eap.conf file. After sending an
>> >Access-Request with EAP-Identity response, using "radeapaclient", an
>> >Access-Challenge (with EAP-Type = 21) was received from the server.
>> >Immediately after receivng the challenge the client is terminating.
>> >
>> >What configuration should be done so that client (radeapclient) responds
>> to
>> >the challenge properly?
>> >
>> >
>> >
>> >
>> >
>> >--
>> >With Regards,
>> >Govardhana K N
>> >
>> >
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
>
>-- 
>With Regards,
>Govardhana K N
>
>