EAP-TTLS PAP Mysql problems

[tnt at kalik.co.yu]

Can you post the radius debug from the failed attempt.

Ivan Kalik
Kalik Informatika ISP


Dana 24/6/2007, "emmcosta" <emmcosta at gmail.com> piše:

>tnt at kalik.co.yu wrote:
>> And the problem is? Your request gets accepted and you do return VLAN
>> attributes.
>>
>> Ivan Kalik
>> Kalik Informatika ISP
>>
>>
>> Dana 24/6/2007, "emmcosta" <emmcosta at gmail.com> piše:
>>
>>
>>> A.L.M.Buxey at lboro.ac.uk wrote:
>>>
>>>> Hi,
>>>>
>>>>
>>>>
>>>>> See in attach naslist, clients.conf and radius -xx log.
>>>>>
>>>>>
>>>> you dont have 127.0.0.1 in your clients.conf
>>>>
>>>> alan
>>>> -
>>>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>>>
>>>>
>>>>
>>> I already add 127.0.0.1 im my clients.conf but I continue with the problem.
>>>
>>> --
>>> /emmc
>>>
>>>
>>>
>>>
>>
>> -
>> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>>
>>
>I think that I know which is the problem, when I change configuration in
>my Cisco ap 1100 to this:
>
>.....................
>dot11 ssid FONTELONGA
>   vlan 2
>   authentication open eap eap_methods
>   authentication key-management wpa
>   accounting acct_methods
>
>interface Dot11Radio0
> no ip address
> no ip route-cache
> !
> encryption vlan 2 mode ciphers tkip
> !
> encryption mode ciphers tkip
> !
> ssid FONTELONGA
>.........................
>
>The authentication fail, but if I have change to this:
>
>.............
>
>dot11 ssid FONTELONGA
>   vlan 2
>   authentication open eap eap_methods
>   accounting acct_methods
>...........
>
>interface Dot11Radio0
> no ip address
> no ip route-cache
> !
> encryption mode wep optional
> !
> encryption vlan 2 mode wep mandatory
> !
> ssid FONTELONGA
>
>.............
>the authentication is sucessefull.
>
>Can you help-me, my Cisco Ap 1100 IOS version is 12.3(8)JA2.
>
>
>--
>/emmc
>
>
>