Whether the FreeRADIUS supports switch 3Com 5500G-EI ?

[Gennadiy Redko]

Krzysztof Olędzki wrote:

> OK, we absolutely need some more info:
> 
>  - display vlan
>  - display vlan ... (2?)
>  - display interface ... (G7/0/40?)
>  - display port-security interface ... (G7/0/40)
Hi,Krzysztof

Viktor Guk wrote:
<skip>
 >All too most, only with the letter "G".
> [5500G-EI]disp vlan
> The following VLANs exist:
>  1(default), 2
> 
> 
> 
> [5500G-EI]disp vlan 2
> VLAN ID: 2
> VLAN Type: static
> Route Interface: not configured
> Description: vlan2
> Name: vlan2
> Tagged   Ports: none
> Untagged Ports:
>  GigabitEthernet7/0/39    GigabitEthernet7/0/47
> 
> 
> 
> [5500G-EI]display interface GigabitEthernet 7/0/40
> GigabitEthernet7/0/40 current state : DOWN
> IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 001a-c147-8e68
> Media type is twisted pair, loopback not set
> Port hardware type is 1000_BASE_T
> Unknown-speed mode, unknown-duplex mode
> Link speed type is autonegotiation, link duplex type is autonegotiation
> Flow-control is not enabled
> The Maximum Frame Length is 1522
> Broadcast MAX-pps: 3000
> Unicast MAX-ratio: 100%
> Multicast MAX-ratio: 100%
> Forbid jumbo frame to pass
> PVID: 1
> Mdi type: auto
> Port link-type: access
>  Tagged   VLAN ID : none
>  Untagged VLAN ID : 1
> Last 300 seconds input:  0 packets/sec 7 bytes/sec
> Last 300 seconds output:  0 packets/sec 48 bytes/sec
> Input(total):  23 packets, 2240 bytes
>         2 broadcasts, 12 multicasts, 0 pauses
> Input(normal):  - packets, - bytes
>         - broadcasts, - multicasts, - pauses
> Input:  0 input errors, 0 runts, 0 giants,  - throttles, 0 CRC
>         - frame,  - overruns, 0 aborts, - ignored, - parity errors
> Output(total): 151 packets, 14501 bytes
>         89 broadcasts, 50 multicasts, 0 pauses
> Output(normal): - packets, - bytes
>         - broadcasts, - multicasts, - pauses
> Output: 0 output errors,  - underruns, - buffer failures
>         0 aborts, 0 deferred, 0 collisions, 0 late collisions
>         0 lost carrier, - no carrier
> 
> 
> 
> [5500G-EI]display port-security interface GigabitEthernet 7/0/40
> GigabitEthernet7/0/40 is link-down
>   Port mode is noRestriction
>   NeedtoKnow mode is disabled
>   Intrusion mode is no action
>   Max mac-address num is not configured
>   Stored mac-address num is 0
>   Authorization is permit




With the options offered by you the stand too has not earned
> 
> BTW: There is no need to add and use TMT802, freeradius already comes 
> with all what you need here:
> 
> Tunnel-Type = VLAN
> Tunnel-Medium-Type = IEEE-802
> Tunnel-Private-Group-ID = ...
> 
> Best regards,
> 
>             Krzysztof Olędzki
> 
Best regards.
Gennadii Redko