AW: trigger an Access Challenge

[tnt at kalik.net]

>But the server doesn't send the reply to the client (Timeout at clientside)
>
>rad_recv: Access-Request packet from host 10.0.1.131:57004, id=7, length=71
>User-Name = "radius"
>NAS-IP-Address = 10.0.1.131
>CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a
>CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455
>Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
>modcall[authorize]: module "preprocess" returns ok for request 0
>rlm_chap: Setting 'Auth-Type := CHAP'
>modcall[authorize]: module "chap" returns ok for request 0
>modcall[authorize]: module "mschap" returns noop for request 0
>rlm_realm: No '@' in User-Name = "radius", looking up realm NULL
>rlm_realm: No such realm "NULL"
>modcall[authorize]: module "suffix" returns noop for request 0
>rlm_eap: No EAP-Message, not doing EAP
>modcall[authorize]: module "eap" returns noop for request 0
>users: Matched entry radius at line 52
>modcall[authorize]: module "files" returns ok for request 0
>perl_pool: item 0xb809a5f0 asigned new request. Handled so far: 1
>found interpetator at address 0xb809a5f0
>rlm_perl: Added pair User-Password = pass
>rlm_perl: Added pair Auth-Type = Perl
>perl_pool total/active/spare [5/0/5]
>Unreserve perl at address 0xb809a5f0
>modcall[authorize]: module "perl" returns ok for request 0
>rlm_pap: WARNING! No "known good" password found for the user.  Authentication may fail because of this.
>modcall[authorize]: module "pap" returns noop for request 0
>modcall: leaving group authorize (returns ok) for request 0
>rad_check_password:  Found Auth-Type Perl
>auth: type "Perl"
>Processing the authenticate section of radiusd.conf
>modcall: entering group Perl for request 0
>perl_pool: item 0xb8181050 asigned new request. Handled so far: 1
>found interpetator at address 0xb8181050
>rlm_perl: RAD_REQUEST: Client-IP-Address = 10.0.1.131
>rlm_perl: RAD_REQUEST: CHAP-Challenge = 0x9899ee060e58b9864898d5fa165a2455
>rlm_perl: RAD_REQUEST: CHAP-Password = 0x7826d3a1143b969ddf5ea1599a9483574a
>rlm_perl: RAD_REQUEST: User-Name = radius
>rlm_perl: RAD_REQUEST: NAS-IP-Address = 10.0.1.131
>rlm_perl: RAD_REPLY: Reply-Message = challenge:
>rlm_perl: RAD_REPLY: User-Password = pass
>rlm_perl: RAD_REPLY: State = challenge
>rlm_perl: Added pair Reply-Message = challenge:
>rlm_perl: Added pair User-Password = pass
>rlm_perl: Added pair State = challenge
>rlm_perl: Added pair Response-Packet-Type = Access-Challenge
>rlm_perl: Added pair Auth-Type = Perl
>perl_pool total/active/spare [5/0/5]
>Unreserve perl at address 0xb8181050
>modcall[authenticate]: module "perl" returns handled for request 0
>modcall: leaving group Perl (returns handled) for request 0
>Finished request 0
>Going to the next request
>--- Walking the entire request list ---
>Waking up in 6 seconds...

That's an outdated server version. Upgrade. It works in the current
version.

Ivan Kalik
Kalik Informatika ISP