Accessing a second AV Pair

Tue Nov 17 08:32:51 CET 2009

My full SQL statement is:

accounting_stop_query = "EXEC ${stopacnt_sp} @username = '%{SQL-User-Name}',
@av_pair = '%{h323-incoming-conf-id}', @gw_session_id_out =
'%{Quintum-h323-conf-id}', @call_origin = '%{Quintum-h323-call-origin}',
@dialstring_from = '%{Calling-Station-Id}', @dialstring_to =
'%{Called-Station-Id}', @disconnect_code_hex =
'%{Quintum-h323-disconnect-cause}', @session_time = '%{Acct-Session-Time}',
@gw_ip = '%{NAS-IP-Address}', @gw_name = '' "

2009/11/17 Andrew Paternoster <andrew at gpk.net.au>

>  What operator are you using? I have multi AVPairs and i have := on the
> first one and += on the others working for me.
>
>
>
>
>
>
> *
> Andrew Paternoster*
> Senior System Engineer
>
>   <http://www.gpk.net.au/> <http://www.gpk.net.au> 2/94 Abbott Road,
> Hallam, VIC 3083
> *Phone:* 1300 854 223* Fax:* 1300 854 228
> *www.gpk.net.au*
>
>
> *Did you know that you can now log faults by just sending an email to **
> support at gpk.net.au* <support at gpk.net.au>
>
>  The information contained in or accompanying this e-mail is intended only
> for the use of the stated recipient and may contain information that is
> confidential and/or privileged. If the reader is not the intended recipient
> or the agent thereof, you are hereby notified that any dissemination,
> distribution or copying of this e-mail is strictly prohibited and may
> constitute a breach of confidence and/or privilege. If you have received
> this e-mail in error, please notify us immediately. Any views or opinions
> presented are those solely of the author and do not necessarily represent
> those of GPK Computers Pty Ltd..
>
>
>
> Warning: Although the company has taken reasonable precautions to ensure no
> viruses are present in this e-mail, the company cannot accept responsibility
> for any loss or damage arising from the use of this e-mail or attachments
>
> *From:* freeradius-users-bounces+andrew=gpk.net.au at lists.freeradius.org[mailto:
> freeradius-users-bounces+andrew <freeradius-users-bounces%2Bandrew>=
> gpk.net.au at lists.freeradius.org] *On Behalf Of *Robert White
> *Sent:* Tuesday, 17 November 2009 1:05 PM
> *To:* FreeRadius users mailing list
> *Subject:* Accessing a second AV Pair
>
>
>
> Hi,
>
>
>
> I have a Radius message which has two AV Pairs and I want to insert them
> both in to a database.  However, I'm unable to access the second AVPair.
>
>
>
> Here is the Radius packet....
>
>
>
> rad_recv: Accounting-Request packet from host 10.152.0.7 port 20001, id=87,
> length=662
>
>         NAS-IP-Address = 10.152.0.7
>
>         Quintum-NAS-Port = "0 7/7/24"
>
>         NAS-Port-Type = Async
>
>         User-Name = "99999999"
>
>         Called-Station-Id = "990006"
>
>         Calling-Station-Id = "1002"
>
>         Acct-Status-Type = Stop
>
>         Acct-Delay-Time = 0
>
>         Acct-Input-Octets = 0
>
>         Acct-Output-Octets = 0
>
>         Acct-Session-Id = "000000AA00000039"
>
>         Acct-Session-Time = 75
>
>         Acct-Input-Packets = 0
>
>         Acct-Output-Packets = 0
>
>         Service-Type = Login-User
>
>         Quintum-AVPair = "h323-ivr-out=ACCESSCODE:990006"
>
>         Quintum-h323-conf-id = "h323-conf-id=34623032 38616662 32630030
> 37333300"
>
>         Quintum-AVPair = "h323-incoming-conf-id=34623032 38616662 32630030
> 37333300"
>
>         Quintum-h323-gw-id = "h323-gw-id=au-syd-test1"
>
>         Quintum-h323-call-origin = "h323-call-origin=answer"
>
>         Quintum-h323-call-type = "h323-call-type=Telephony"
>
>         Quintum-h323-setup-time = "h323-setup-time=01:37:31.685 UTC Tue Nov
> 17 2009"
>
>         Quintum-h323-connect-time = "h323-connect-time=01:37:31.885 UTC Tue
> Nov 17 2009"
>
>         Quintum-h323-disconnect-time = "h323-disconnect-time=01:38:46.495
> UTC Tue Nov 17 2009"
>
>         Quintum-h323-disconnect-cause = "h323-disconnect-cause=10"
>
>         Quintum-h323-voice-quality = "h323-voice-quality=0"
>
>         Quintum-Trunkid-In = "0 7/7/24"
>
>         Quintum-Trunkid-Out = "10.0.20.36"
>
>
>
> When using the standard dictionary.quintum %{Quintum-AVPair}
> = h323-ivr-out=ACCESSCODE:990006.  I couldn't read the second AVPair.
>
>
>
> I did some Googling and read
>
>
>
> "if it [the preprocess module] founds Cisco-AVPair attribute like
>
> Cisco-AVPair = "gw-rxd-cdn=ton:0,npi:1,#:XXXXXXXX"
> and there's dictionary attribute gw-rxd-cdn, then it adds new attribute
> "gw-rxd-cdn" with value "ton:0,npi:1,#:XXXXXXXX".
> So if you have Cisco-AVPair attributes which you would like to insert
> into SQL, you need to create them in cisco dictionary."
>
>
>
> As Quintum and Cisco are very similar I tried the same thing and edited the
> dictionary.quintum file adding in the following lines:
>
>
>
> ATTRIBUTE      h323-ivr-out                            3000    string
>
> ATTRIBUTE      h323-incoming-conf-id               3001    string
>
>
>
> I noted that there is already a very similar attribute for
> h323-incoming-conf-id - it just has the word 'Quintum' prepended to it.
>
>
>
> However, after the dictionary edit, Radius failed to load. I got the
> following error:
>
>
>
> "Errors reading dictionary: dict_init:
> /usr/local/share/freeradius/dictionary.quintum[53]: dict_init:
> /usr/local/share/freeradius/dictionary.quintum[53]:"
>
>
>
> Am I on the right track here?
>
>
>
> Any help appreciated.
>
>
>
> Thanks,
>
>
>
> Rob
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>

-- 
Rob White
Assistant IT Manager
Core Infrastructure & System Development
Global Gossip Group
Address: 14 Wentworth Avenue, Sydney NSW 2010
Telephone: +61 292 630 460
Fax: +61 292 630 404
Mobile: +61 410 700 733
Email: rwhite at globalgossip.net
Skype: robwhite83
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20091117/a945b602/attachment.html>