"Ancient" Freeradius Problem
Teguh Kurniawan
teguhkurniawanwijaya at gmail.com
Fri Feb 12 12:42:02 CET 2010
Hello,
I use "ancient" Free Radius 1.1.7 packages (from Ubuntu 8.04/Hardy) on
Ubuntu Server 9.10. I use "ancient" Free Radius, because the
requirement from Radius Manager we buy from
http://www.radius-manager.com/.
But after finish setting up the configuration for Free Radius, I've
got some problem. Some problem I could fixed after asking some
question from this mailing list and searching from google.
But I've got another problem, my testing is rejected. What should I do ?
Best Regards,
Teguh Kurniawan
# radtest user 1111 localhost 1812 testing123
Sending Access-Request of id 172 to 127.0.0.1 port 1812
User-Name = "user"
User-Password = "1111"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=172, length=20
/etc/hosts
127.0.0.1 localhost
192.168.0.3 radiusmanager.testme.net radiusmanager
# freeradius -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/proxy.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/snmp.conf
Config: including file: /etc/freeradius/eap.conf
Config: including file: /etc/freeradius/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: snmp = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 1812
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
pap: auto_header = yes
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/freeradius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/freeradius/huntgroups"
preprocess: hints = "/etc/freeradius/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded files
files: usersfile = "/etc/freeradius/users"
files: acctusersfile = "/etc/freeradius/acct_users"
files: preproxy_usersfile = "/etc/freeradius/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "radius"
sql: password = "radius123"
sql: radius_db = "radius"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/var/log/freeradius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value,
op FROM radcheck WHERE Username =
'%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value,
op FROM radreply WHERE Username =
'%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = " UPDATE radacct
SET FramedIPAddress = '%{Framed-IP-Address}',
AcctSessionTime = '%{Acct-Session-Time}',
AcctInputOctets = '%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}',
AcctOutputOctets = '%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName =
'%{SQL-User-Name}' AND NASIPAddress =
'%{NAS-IP-Address}'"
sql: accounting_update_query_alt = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName,
Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctSessionTime,
AcctAuthentic, ConnectInfo_start, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay, XAscendSessionSvrKey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0}
+ %{Acct-Delay-Time:-0}) SECOND),
'%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Acct-Input-Gigawords:-0}' <<
32 | '%{Acct-Input-Octets:-0}',
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{X-Ascend-Session-Svr-Key}')"
sql: accounting_start_query = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime,
AcctAuthentic, ConnectInfo_start, ConnectInfo_stop,
AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay,
AcctStopDelay, XAscendSessionSvrKey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0',
'0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0',
'0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time:-0}', '0',
'%{X-Ascend-Session-Svr-Key}')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = " UPDATE radacct SET
AcctStopTime = '%S', AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}', AcctOutputOctets =
'%{Acct-Output-Gigawords:-0}' << 32 |
'%{Acct-Output-Octets:-0}', AcctTerminateCause =
'%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time:-0}', ConnectInfo_stop =
'%{Connect-Info}' WHERE AcctSessionId =
'%{Acct-Session-Id}' AND UserName =
'%{SQL-User-Name}' AND NASIPAddress =
'%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = " INSERT INTO radacct
(AcctSessionId, AcctUniqueId, UserName, Realm,
NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S', INTERVAL
(%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}',
'%{Acct-Input-Gigawords:-0}' << 32 |
'%{Acct-Input-Octets:-0}', '%{Acct-Output-Gigawords:-0}'
<< 32 | '%{Acct-Output-Octets:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{Acct-Delay-Time:-0}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = "SELECT COUNT(*)
FROM radacct WHERE
UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId,
FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct
WHERE UserName='%{SQL-User-Name}'
AND AcctStopTime = 0"
sql: postauth_query = "INSERT into radpostauth (user, pass, reply,
date) values ('%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:55166, id=172, length=56
User-Name = "user"
User-Password = "1111"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "user", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 217
radius_xlat: '/usr/local/bin/rmauth "255.255.255.255" "user""" "1812"'
modcall[authorize]: module "files" returns ok for request 0
radius_xlat: 'user'
rlm_sql (sql): sql_set_user escaped user --> 'user'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op
FROM radcheck WHERE Username = 'user' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'user' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY
radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op
FROM radreply WHERE Username = 'user' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = 'user' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY
radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
rlm_pap: Found existing Auth-Type, not changing it.
modcall[authorize]: module "pap" returns noop for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type Local
auth: type Local
auth: user supplied User-Password matches local User-Password
Processing the session section of radiusd.conf
modcall: entering group session for request 0
radius_xlat: 'user'
rlm_sql (sql): sql_set_user escaped user --> 'user'
radius_xlat: 'SELECT COUNT(*) FROM
radacct WHERE UserName='user'
AND AcctStopTime = 0'
rlm_sql (sql): Reserving sql socket id: 3
rlm_sql (sql): Released sql socket id: 3
modcall[session]: module "sql" returns ok for request 0
modcall: leaving group session (returns ok) for request 0
cfg.c, line 175: no permission for configfile
Exec-Program output:
Exec-Program: returned: 1
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 172 to 127.0.0.1 port 55166
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 172 with timestamp 4b7537cd
Nothing to do. Sleeping until we see a request.
More information about the Freeradius-Users
mailing list