Packet Fence web interface and freeradius users

[Marlon Bastida]

Jake,

I sent a same message on Packet Fence list.

Tks Marlon

2011/8/25 Sallee, Stephen (Jake) <Jake.Sallee at umhb.edu>

>  I just finished a deployment that did exactly that!  This may be a
> subject more suited for their mailing list (which I am on as well).****
>
> ** **
>
> Message me on that list and I bet we can get you working. I only say this
> because from what you say FreeRADIUS is sending the correct radius
> attributes back, if that is the case then FR is doing its job perfectly and
> the problem likely lies with your NAS.****
>
> ** **
>
> ** **
>
> Jake Sallee****
>
> Godfather of Bandwidth****
>
> System Engineer****
>
> University of Mary Hardin-Baylor****
>
> 900 College St.****
>
> Belton, Texas****
>
> 76513****
>
> Fone: 254-295-4658****
>
> Phax: 254-295-4221****
>
> ** **
>
> *From:* freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org[mailto:
> freeradius-users-bounces+jake.sallee=umhb.edu at lists.freeradius.org] *On
> Behalf Of *Marlon Bastida
> *Sent:* Thursday, August 25, 2011 9:16 PM
> *To:* freeradius-users at lists.freeradius.org
> *Subject:* Packet Fence web interface and freeradius users****
>
> ** **
>
> Hi,****
>
> ** **
>
> I have 3 radius users working on freeradius. I will give one sample:****
>
> ** **
>
> On /etc/raddb/users****
>
> ** **
>
> test    Cleartext-Password:="test"****
>
>         Service-Type = Framed-User,****
>
>         Tunnel-Type = VLAN,****
>
>         Tunnel-Medium-Type = IEEE-802,****
>
>         Tunnel-Private-Group-ID = "2" ****
>
> ** **
>
> When I enter with this user credentials on Xp client 802.1X auth they give
> to the proper VLAN assigned. For example I have  VLAN-ID = 2 - registration,
> 3 - isolation, 5 - guests, 10 - normal. ****
>
> ** **
>
> So with the statement Tunnel-Private-Group-ID = VLAN-ID, I can't get
> succesfully put a user on the proper VLAN, in this case above entered on
> registration VLAN.****
>
> ** **
>
> If anyone has acknowledge with Packet Fence solution I would like some help
> to integrate these users with web interface of Packet Fence 2.1.0. So I can
> get on the Violation Tab (isolation VLAN) an user or Node Tab (guests VLAN).
> ****
>
> ** **
>
> ** **
>
> Tks in advance,****
>
> Marlon****
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20110826/65addd5d/attachment.html>