Renaming during Machine Authentication
mjonesmcne
mjones at hpsd48.ab.ca
Fri Jun 3 18:19:36 CEST 2011
Here is my debug now I might have to break it up into 2 posts though because
of the size
FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Mar 23 2011
at 11:28:44
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
main {
allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
prefix = "/usr/local"
localstatedir = "/var"
logdir = "/var/log/radius"
libdir = "/usr/local/lib"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 10.152.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
client 10.24.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
client 10.56.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
client 10.32.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
client 10.16.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
client 10.72.0.0/13 {
require_message_authenticator = no
secret = "centrino"
shortname = "centrino"
nastype = "aruba"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
}
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/raddb/eap.conf
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
random_file = "/etc/raddb/certs/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/raddb/certs/bootstrap"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Instantiating module "ntdomain" from file /etc/raddb/modules/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/raddb/modules/files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.access_reject" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
}
} # modules
} # server
server { # from file /etc/raddb/radiusd.conf
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/raddb/modules/digest
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_ldap
Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
ldap {
server = "172.17.152.4"
port = 636
password = "xxxx"
identity = "cn=admin,o=hpsd_48"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "o=hpsd_48"
filter = "(uid=%{mschap:User-Name:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
password_attribute = "nspmPassword"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = yes
set_auth_type = no
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0x819b1b8
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/raddb/modules/detail
detail {
detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=100,
length=207
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x0201002101686f73742f544553542d31313530312e6870736434382e61622e6361
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0x3fc51307320dc5715e92eecad18a7497
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 33
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for host/TEST-11501.hpsd48.ab.ca
[ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TEST-11501$)
[ldap] expand: o=hpsd_48 -> o=hpsd_48
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] attempting LDAP reconnection
[ldap] (re)connect to 172.17.152.4:636, authentication 0
[ldap] setting TLS mode to 1
[ldap] bind as cn=admin,o=hpsd_48/xxxx to 172.17.152.4:636
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$)
[ldap] Added the eDirectory password xxxx in check items as
Cleartext-Password
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
[ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 100 to 10.152.0.100 port 32819
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x019a929401988b9c422c188eb1599474
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
} # server inner-tunnel
[peap] Got tunneled reply code 3
MS-CHAP-Error = "\010E=691 R=1"
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\010E=691 R=1"
EAP-Message = 0x04080004
Message-Authenticator = 0x00000000000000000000000000000000
[peap] Tunneled authentication was rejected.
[peap] FAILURE
++[eap] returns handled
Sending Access-Challenge of id 107 to 10.152.0.100 port 32819
EAP-Message =
0x010900261900170301001bff964598d07d4dd0c38635418e6dc2288e2d28f07cdec632840d8d
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x019a929406938b9c422c188eb1599474
Finished request 7.
Going to the next request
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=108,
length=230
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x020900261900170301001b484dac5941c9c6e1e6f5f65245aa4a15dadcff5adf50aa9a55e7a2
State = 0x019a929406938b9c422c188eb1599474
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0xe8ecd2a6e6c5d0e2d1748001c7e06674
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 9 length 38
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] eaptls_verify returned 7
[peap] Done initial handshake
[peap] eaptls_process returned 7
[peap] EAPTLS_OK
[peap] Session established. Decoding tunneled attributes.
[peap] Peap state send tlv failure
[peap] Received EAP-TLV response.
[peap] The users session was previously rejected: returning reject (again.)
[peap] *** This means you need to read the PREVIOUS messages in the debug
output
[peap] *** to find out the reason why the user was rejected.
[peap] *** Look for "reject" or "fail". Those earlier messages will tell
you.
[peap] *** what went wrong, and how to fix the problem.
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} ->
host/TEST-11501.hpsd48.ab.ca
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 8 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 8
Sending Access-Reject of id 108 to 10.152.0.100 port 32819
EAP-Message = 0x04090004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.7 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=109,
length=207
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x0201002101686f73742f544553542d31313530312e6870736434382e61622e6361
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0x853e6724620b407fe84ff5501ca8df01
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 33
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for host/TEST-11501.hpsd48.ab.ca
[ldap] expand: (uid=%{mschap:User-Name:-%{User-Name}}) -> (uid=TEST-11501$)
[ldap] expand: o=hpsd_48 -> o=hpsd_48
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in o=hpsd_48, with filter (uid=TEST-11501$)
[ldap] Added the eDirectory password xxxx in check items as
Cleartext-Password
[ldap] looking for check items in directory...
[ldap] looking for reply items in directory...
[ldap] user host/TEST-11501.hpsd48.ab.ca authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 109 to 10.152.0.100 port 32819
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xaf0b06b8af091f13414e4025002a7e0a
Finished request 9.
Going to the next request
Waking up in 3.4 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=110,
length=279
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
0x0202005719800000004d16030100480100004403014de906da35a800084268cf2d0a7eafe7044381e765dfb217746f493469c8e29500001600040005000a0009006400620003000600130012006301000005ff01000100
State = 0xaf0b06b8af091f13414e4025002a7e0a
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0xb5d520483b1671c6a09a1aae6bf8c27b
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 87
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 77
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0048], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 085e], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client certificate
A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 110 to 10.152.0.100 port 32819
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x860004ab308204a73082038f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xaf0b06b8ae081f13414e4025002a7e0a
Finished request 10.
Going to the next request
Waking up in 3.3 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=111,
length=198
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020300061900
State = 0xaf0b06b8ae081f13414e4025002a7e0a
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0xe25c0d2221df89334b616e7691ae672d
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 111 to 10.152.0.100 port 32819
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0x53c8cb22d3f8f1f7
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xaf0b06b8ad0f1f13414e4025002a7e0a
Finished request 11.
Going to the next request
Waking up in 3.3 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=112,
length=198
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message = 0x020400061900
State = 0xaf0b06b8ad0f1f13414e4025002a7e0a
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0xf3d64b1ad71afcaa8f52b1e07dec75ef
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 6
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
[peap] Received TLS ACK
[peap] ACK handshake fragment handler
[peap] eaptls_verify returned 1
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 112 to 10.152.0.100 port 32819
EAP-Message =
0x010500bc19004c396c46b788613f2eae5433381f96d583a69217e9b3504b2751ba9b7c98b5795763ec2dca296f1c69e6a6c0814c9723f903ff293ab3d5bd932b98d0e833e3a01ded48b321eb509dd2e61548875967dc1282a4022b615f7360c573c4d1e52b10f16387a6d3ab90066bb454697e5715108aa946fe9208e0c56acbc5ba8277b15393f6d3ce03a2fb07536a1177550c4dbb473cf421ba6fd64330b3ef931207d7af48184e874f2e55130a498d722c16030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xaf0b06b8ac0e1f13414e4025002a7e0a
Finished request 12.
Going to the next request
Waking up in 3.3 seconds.
rad_recv: Access-Request packet from host 10.152.0.100 port 32819, id=113,
length=514
User-Name = "host/TEST-11501.hpsd48.ab.ca"
NAS-IP-Address = 10.152.0.100
NAS-Port = 1
NAS-Identifier = "10.152.0.100"
NAS-Port-Type = Wireless-802.11
Calling-Station-Id = "00265EE9B2CA"
Called-Station-Id = "000B86611894"
Service-Type = Login-User
Framed-MTU = 1100
EAP-Message =
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
EAP-Message =
0xa4355e662e9950b8933b040af55133487ac046b9417defd814030100010116030100202189ed42f5c686a93a7b80563149c8ec9c01a092f8ab4636d1c594e0d1e44f03
State = 0xaf0b06b8ac0e1f13414e4025002a7e0a
Aruba-Essid-Name = "HPSD_RAD2"
Aruba-Location-Id = "Tech 01"
Message-Authenticator = 0x4f0f6002da5fa6dafa6fe46827e2ed2c
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "host/TEST-11501.hpsd48.ab.ca", looking up
realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 5 length 253
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 310
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange
[peap] TLS_accept: SSLv3 read client key exchange A
[peap] <<< TLS 1.0 ChangeCipherSpec [length 0001]
[peap] <<< TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 read finished A
[peap] >>> TLS 1.0 ChangeCipherSpec [length 0001]
[peap] TLS_accept: SSLv3 write change cipher spec A
[peap] >>> TLS 1.0 Handshake [length 0010], Finished
[peap] TLS_accept: SSLv3 write finished A
[peap] TLS_accept: SSLv3 flush data
[peap] (other): SSL negotiation finished successfully
SSL Connection Established
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 113 to 10.152.0.100 port 32819
EAP-Message =
0x01060031190014030100010116030100203c5e6364785ff9c2b98e606384d0ae00a07e305e10c79c4ccbbea4e20f469c2d
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xaf0b06b8ab0d1f13414e4025002a7e0a
Finished request 13.
Going to the next request
--
View this message in context: http://freeradius.1045715.n5.nabble.com/Renaming-during-Machine-Authentication-tp4394421p4451744.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
More information about the Freeradius-Users
mailing list