Dynamic vlan assignment with ldap groups

[val john]

Hi guys

I had to also set the  "*use_tunneled_reply=yes*" in the eap.conf to get
the Dynamic vlan assignment to work


On 12 July 2013 19:42, val john <valjohn1647 at gmail.com> wrote:

> Hi guys ,
>
> Small question , do i need to import radius ldap schema ( items like radiusprofiles
> )  to our ldap server to get this VLAN assignment work
>
> Thank You
> john
>
>
> On 12 July 2013 18:39, Arran Cudbard-Bell <a.cudbardb at freeradius.org>wrote:
>
>>
>> On 12 Jul 2013, at 13:57, val john <valjohn1647 at gmail.com> wrote:
>>
>> > Hi guys ,
>> >
>> > i have a freeradius setup that works with ldap group authentication ,i
>> also need to configure the dynamic VLAN assignment , so i configured the
>> "users" file as fallows ,
>> >
>> > DEFAULT Ldap-Group == "cn=staff,ou=groups,dc=ldap,dc=example,dc=com"
>> >         Tunnel-Type = VLAN,
>> >         Tunnel-Medium-Type = IEEE-802,
>> >         Tunnel-Private-Group-Id = "100",
>> >        Reply-Message = "You are Accepted"
>> >
>> > DEFAULT Ldap-Group == "cn=nonstaff,ou=groups,dc=ldap,dc=example,dc=com"
>> >         Tunnel-Type = VLAN,
>> >         Tunnel-Medium-Type = IEEE-802,
>> >         Tunnel-Private-Group-Id = "200",
>> >         Reply-Message = "You are Accepted"
>> >
>> > DEFAULT Auth-Type := Reject
>> >
>> >
>> > ,Do  i need any other configuration file to be edited  to get VALN
>> assignment to work ..? or juts  "users" file is enough
>>
>> Just users file is fine.
>>
>> Arran Cudbard-Bell <a.cudbardb at freeradius.org>
>> FreeRADIUS Development Team
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20130716/1f966c4a/attachment.html>